JBL Endurance Peak 3 Dust and Waterproof True Wireless Active Earbuds User Guide
- June 3, 2024
- JBL
Table of Contents
JBL Endurance Peak 3 Dust and Waterproof True Wireless Active Earbuds User
Guide
WHAT’S IN THE BOX
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH
THIS FREE APP.
How to wear
-
ATTACH ear tips and ENHANCERS
Mix and match for a perfect fit and audio performance
-
TWISTLOCK™ Technology
First time use
Power On & Connect
DUAL CONNECT
CONTROLS
- Enable advance controls by connecting your JBL ENDURANCE PEAK3 to JBL Headphones App
.
**ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R)
VOICEAWARE
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
Charging
WATERPROOF & DUSTPROOF IP68
LED Behaviors **
**
TECH SPEC
- Model: ENDURANCE PEAK 3
- Driver size: 10 mm/ 0.39″ Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 12.5 g per pc (25 g combined)/ 0.0275 lbs per pc (0.055 lbs combined)
- Charging case: 76 g/ 0.167 lbs
- Earbud battery type: Lithium-ion polymer (70 mAh/ 3.85 V)
- Charging case battery type: Lithium-ion polymer (950 mAh/ 3.7 V)
- Charging time: 2 hrs from empty
- Talk time: 5.5 hrs
- Music playtime with BT on: up to 9.5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 102 dB SPL@1 kHz
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.2
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2.400 GHz – 2.4835 GHz
- Bluetooth transmitter power: <13dBm
- Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLENPEAK3) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.99 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
References
- Anatel — Agência Nacional de Telecomunicações
- HARMAN International
- Official JBL Store - Speakers, Headphones, and More!