Hunter 99753 Ceiling Fan Wall Control User Manual

: May 15, 2024
: Hunter

Table of Contents

Hunter 99753 Ceiling Fan Wall Control
HUNTER FAN COMPANY CONTROL LIMITED WARRANTY
Read and Save These Instructions
WARNINGS
Installation
Troubleshooting
Specifications
WARRANTY
FAQ
- How long is the warranty period?
- What parts are not covered under warranty?
Documents / Resources

Hunter 99753 Ceiling Fan Wall Control

CEILING FAN WALL CONTROL:
Model 99753 / KJ500

HUNTER FAN COMPANY CONTROL LIMITED WARRANTY

Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter accessory control. This document can be found at www.HunterFan.com.
Thank you for choosing Hunter!

Read and Save These Instructions

This product conforms to UL Standard 1917.

WARNINGS

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Note: Any changes or modifications to the transmitter or receiver not expressly approved by Hunter Fan Company may void one’s authority to operate this remote control. Chemical burn hazard. Keep batteries away from children. This remote contains a lithium button cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Dispose of cells properly and keep away from children. Even used cells may cause injury.

Installation

The Hunter Wall Control requires an installed compatible receiver to function. Please follow the installation instructions included with the receiver prior to setting up your Wall Control.

If you are installing multiple remote-controlled fans on the same circuit breaker, you may need to perform a few extra steps to prevent interference or faulty operation of your remote controls.
Go to www.HunterFan.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for more information.

1. Turning off the power

Before installation, use the pull chains to set the fan speed to HIGH and the light to ON. Ensure the power is OFF at the outlet box and wall switch location before proceeding with installation.

WARNING

To avoid possible electrical shock, before installing your control, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.
All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a qualified electrician.

2. Installing the battery

To access the battery compartment, slide the battery door up.
Replace the used battery with two AA batteries when needed.

3. Installing the Wall Control

Install the longer screws through the slots in the wall control into the switch box screw holes.

4. Wiring the Wall Control

Using the wire connectors, connect each black wire from the wall control to a black wire from the switch box. Connect the green with yellow stripe wire to the grounding wire from the switch box.

Note: If two white wires are present in the switch box, connect them to each other if they are not already connected.

5. Installing the Wall Plate

Install the shorter screws through the wall control plate and into the screw holes in the wall control.

6. Turning on the power

IMPORTANT

Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation.

7. Pairing the Wall Control

To pair the remote to your Hunter receiver, PRESS AND HOLD THE (-) BUTTON. WHILE HOLDING THE (-) BUTTON PRESS THE (+) BUTTON TWICE within three minutes of restoring power to the fan.

8. Reference the included remote function card for information on how

to use your wall control!

Troubleshooting

Remote Control of Fan is Erratic

Make sure the battery is installed correctly.
Install a fresh battery.

Multiple Remote Issues

If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to
www.HunterFan.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.

Remote Functions

Specifications

Model: 99753 / KJ500
Manufacturer: Hunter Fan Company
Warranty: One-Year Limited Warranty
Conforms to: UL Standard 1917

WARRANTY

How Can Warranty Service Be Obtained?

Proof of purchase is required when requesting warranty service. The original purchaser must present a sales receipt or other document that establishes proof of purchase.
Hunter, at its sole discretion, may accept a gift receipt. To obtain service, contact Hunter
Fan Company online or by phone.
www.HunterFan.com/Support/Contact-Us/
1-888-830-1326
Please do not ship your accessory control or any control parts to Hunter.
Delivery will be refused.

What Does This Warranty Cover?

One-Year Limited Warranty
If any part of your Hunter accessory control fails at any time within one year of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

If no replacement product/part can be provided for your accessory control, we will provide a comparable or superior replacement product/part at the sole discretion of Hunter.

What Does This Warranty NOT Cover?

Labor Excluded. This warranty does not cover any costs or fees associated with the labor (including electrician’s fees) required to install, remove, or replace an accessory control or its parts.
There is no warranty for light bulbs or LEDS (except where otherwise noted); remote control batteries; accessory controls purchased or installed outside the United States;
accessory controls owned by someone other than the original purchaser; accessory controls for which proof of purchase has not been established; accessory controls purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished accessory controls; and accessory controls that are damaged due to any of the following: improper installation, misuse, abuse, improper care, failure to follow Hunter instructions, accidental damage caused by the accessory control owner or related parties, modifications to the accessory controls, improper or incorrectly performed maintenance or repair, improper voltage supply or power surge, use of improper parts or accessories, failure to provide maintenance to the accessory controls, or acts of God (e.g. flood).

ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How Does State Law Affect Warranty Coverage?

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

FAQ

How long is the warranty period?

The warranty period for this product is one year from the date of purchase.

What parts are not covered under warranty?

Labor costs, light bulbs, LEDS, remote control batteries, controls purchased outside the US, and damage from acts of God are not covered under warranty.

Documents / Resources

| Hunter 99753 Ceiling Fan Wall Control [pdf] User Manual
99753 Ceiling Fan Wall Control, 99753, Ceiling Fan Wall Control, Fan Wall Control, Wall Control
---|---