tGt G250 Gabinete Gamer Instruction Manual
- June 1, 2024
- TGT
Table of Contents
tGt G250 Gabinete Gamer
This document provides instructions and specifications for the G250 product. It is essential to read and understand all the instructions to avoid equipment damage and warranty voidance.
Important Notice
It is of utmost importance to read, understand and follow all the
instructions contained in this manual. Incorrect handling can damage the
equipment and cause the warranty to be voided.
Product Overview
The product is a computer case branded with the TGT logo and features a sleek design with a front panel that includes a subtle RGB lighting strip.
Front Fan Installation
Support for 2 120mm fans on the front panel. Position and secure the fans
with their respective screws.
Rear Fan Installation
Support for 1 120mm fan on the rear panel. Position and secure the fan with
its respective screws.
Motherboard Installation
Position the Motherboard, aligning the holes with those of the cabinet, and secure it using the corresponding screws. Compatible with M-ITX and M-ATX motherboard form factors.
3.5″ HDD Installation
Adjust the HDD in the correct position so that the HDD holes align with the
cabinet holes, then use the corresponding screws for fixation.
2.5″ SSD Installation
Adjust the SSD in the correct position so that the SSD holes align with the
cabinet holes, then use the corresponding screws for fixation.
Video Card Installation
Maximum video card length: 250mm. The case has 4 expansion slots. Identify
how many expansion slots the video card model will occupy. Remove the
expansion slots that will be used. After connecting the Video Card to the
Motherboard, simply secure the video card backplate with the corresponding
screws.
CPU Cooler Specifications
Maximum CPU cooler height: 140mm.
Specifications
| Component | Details |
|---|---|
| Front Fans | 2 x 120mm |
| Rear Fans | 1 x 120mm |
| Motherboard Support | M-ITX, M-ATX |
| 3.5″ HDD Bays | Adjustable position for alignment |
| 2.5″ SSD Bays | Adjustable position for alignment |
| Video Card Length | Maximum 250mm |
| CPU Cooler Height | Maximum 140mm |
Thank You Note
We thank you for choosing the TGT product as part of your journey. Explore our sites and find the ideal product to enhance your experience.
Note: There are two QR codes provided for Target and Pichau Group, presumably for further information or product registration.
FAQ
How many fans can be installed in the G250 case?
The case supports 2 front 120mm fans and 1 rear 120mm fan.
What size motherboard is compatible with the G250 case?
The G250 case is compatible with M-ITX and M-ATX form factor motherboards.
What is the maximum length for a video card in the G250 case?
The maximum length for a video card is 250mm.
What is the maximum height for a CPU cooler in the G250 case?
The maximum height for a CPU cooler is 140mm.