Prowess ProMini M18 Rechargeable Speaker User Manual

Prowess ProMini M18 Rechargeable Speaker

Product Information

Specifications:

• Product: ProMini M18 Rechargeable Speaker
• Charging Cable: TYPE-C
• Charging Input: DC 5V/1000mA
• Bluetooth Range: 20-30 ft
• Charging Time: Approximately 3.5 hours

Product Description:
The ProMini M18 is a compact rechargeable speaker that offers Bluetooth connectivity for wireless audio streaming. It features easy-to-use controls for power, volume adjustment, track selection, and LED light customization.

Product Usage Instructions

Power On/Off and Music Playback:
To power on/off the speaker, hold the button. Press the button to play/pause music. Adjust volume by pressing for +/- and change tracks by holding the buttons.

LED Light Control:
Press the button to change the LED light color or turn off the light.

Charging the Battery:

1. Plug one end of the TYPE-C charging cable into the DC 5V jack on the speaker and the other end into a USB port.
2. The red LED indicates charging status; it turns off when fully charged (approximately 3.5 hours).
3. Disconnect the cable once charging is complete.

Bluetooth Play Mode:

1. Turn on the speaker and enter Bluetooth mode by holding the button.
2. Pair with your device (no password needed for “Gladorn M18”).
3. Adjust volume on your device and speaker, change tracks, and pause/play music using the buttons on the speaker.

FAQ:

Troubleshooting:

• No Power: Ensure speaker is turned on and fully charged.
• No Sound/ Distorted Sound: Adjust volume levels on speaker and connected device.
• Bluetooth Pairing Issue: Follow pairing instructions and ensure energy levels are sufficient.

Battery Disposal:
Dispose of used batteries according to local regulations. Do not dispose of them with regular household waste. Contact local authorities for more information on recycling options.

Please read the manual carefully before use and keep it well for further use.

Package Contents

• Rechargeable speaker
• TYPE-C Charging cable
• User guide

Product Description

Product Top

1. Hold the button for power ON/OFF, and press the button to Play/Pause music.

2. Press it for Volume +. Hold it for the Next song.

3. Press it for Volume -, Hold it for Previous song.

4. Press it to change the LED light color or turn off the light
   Product Back

5. Charge LED indicator(Red LED indicates the unit is charging and not full. The red LED will turn off when fully charged.

6. DC 5V charge in (5V/1000mA)

Charging The Battery

1. Use the included TYPE-C Charging cable, Plug one end into the DC 5V jack located at the side of the unit, and Plug the other end into a USB-powered port or any other USB AC adapter (not included).
2. The battery is fully charged in about 3.5 hours. (Charging time will be longer if play music while charging .)
3. The red LED light indicates that the unit is charging, The red LED turns off when the battery is fully charged, You can disconnect the charging cable when charging is complete.

Bluetooth Play Mode

If you are using a Bluetooth audio device, make sure the working distance is within 20 – 30 ft, a different environment may affect the working distance.

1. Press and hold the button to turn ON the speaker, The speaker will give a beeping sound to indicate it is in Bluetooth mode.
2. Turn on the Bluetooth on your audio device.
3. Searching Devices Choose ” Gladorn M18 “. No password is required. If your device does require a password, type ”0000”
4. Adjust the volume on your audio device to the desired level.
5. Press the + or – button on the unit to adjust the system volume.
6. Hold the + or – button on the unit to adjust the previous/next song.
7. Press the button to pause/play music and hold the button to disconnect from the audio device.

NOTE:
The speaker will power off automatically after 30 minutes if you don’t operate it or play music.

TWS (True Wireless Stereo) Connection

1. 1. Ensure neither speaker is connected to your device via Bluetooth and turn Bluetooth OFF on your device.
2. Press and hold the button to turn on the speakers.
3. Double-click the button on any of the speakers, you will hear a beep sound when the two speakers are paired.
4. Then you can turn on the Bluetooth on your device to select ” Gladorn M18 ” for pairing.
5. You will hear a beep sound once connected to your bluetooth device, then you can play the music.

NOTE:
Once paired, the two speakers will automatically pair each time they are turned ON, should you wish to unpair them, double-click the button on either speaker. The speaker will beep indicating that the speakers are no longer paired.

TROUBLESHOOTING

completely charged.
No sound| • Make sure the volume of your speaker is not at the minimum setting.

• Make sure the connected audio device is playing audio.

The sound is distorted.| Turn down the volume of the speaker or the connected device.
Cannot pair the speaker with my Bluetooth device| • Make sure the Bluetooth mode of your device is turned on.

• Your Bluetooth device may be out of range. Try moving it closer to the speaker.

• Move your Bluetooth device and/or the speaker away from other devices that generate electromagnetic interference, such as phones, microwave oven, wireless network routers, or other Bluetooth devices.

Precautions

To prevent the possibility of the battery from leaking, heating, fire .please observe the following precautions:

Warnings

1. Please use the attached USB charging cable in the package to charge the unit
2. Please disconnect the charging cable after fully charging the unit, Do not charge the unit for a long time after unit fully charged
3. Do not immerse the product in water and seawater
4. Do not use and leave the product near a heat source such as a fire or heater(for example, in strong direct sunlight or a vehicle in extremely hot conditions). Otherwise, it can overheat or fire, or its performance will degenerate and its service life will be decreased.
5. Do not place it into the water, any other liquid, Fire, or any heater machine
6. Do not strike or throw the product.
7. Do not use it in a location where static electricity is great, otherwise, the safety devices may be damaged, which will cause hidden trouble of safety.
8. The batteries should be stored at room temperature, and charged to about 30% to 50% of capacity. In case of over-discharge, batteries should be charged one time every.
9. months while storing and batteries should be discharged and charged after being stored for more than a year to activate it and restore energy.
10. Please follow the Waste battery recycling method to dispose of the unit
    • This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of their life separately from your household waste.
    • There are separate collection systems for recycling in the EU.
    • For more information, please contact the local authority or the retailer where you purchased the product.

Notes for battery disposal

• The batteries used with this product contain chemicals that are harmful to the environment.
• To preserve our environment, dispose of used batteries according to your local laws or regulations.
• Do not dispose of batteries with normal household waste.
• For more information, please contact the local authority or the retailer where you purchased the product.

FCC STATEMENT

FCC ID: RDZ-PROMINIM18 Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>