HYUNDAI HYUAP235 Ionic Air Purifier Instruction Manual
- June 5, 2024
- HYUNDAI
Table of Contents
HYUAP235 Ionic Air Purifier
Instruction Manual
Ionic Air Purifier
Thank you for using our product. You have purchased a high-quality product.
To help you operate this device, please read this manual carefully and keep
the warranty card in a proper and safe place.
SAFETy INSTRUCTIONS
Ensure that all safety precautions are followed when using electrical
appliances for the proper operation of the device. This instruction booklet
describes the safety precautions to be observed during operation to prevent
injuries to yourself and other persons and damage by an improper operation to
the device.
– This product can be used by children at the age of 8 years and older and
people with reduced physical or mental abilities or lack of experience and
knowledge if they are supervised or if they were instructed regarding the use
of the appliance in a safe way if they understand possible risks. Children
must not play with the appliance. User cleaning and maintenance must not be
performed by children if they are younger than 8 years and unsupervised.
Children younger than 8 years must be kept out of reach of the appliance and
its power cord.
– Turn the device off and unplug from the power source by pulling the plug out
of the socket before replacing any attachments or accessible parts which are
moving during operation (before installing or uninstalling, before cleaning or
maintenance).
– If the supply cord of this device is damaged, the cord must be replaced by
the manufacturer, its servicing technician or a similarly qualified person to
avoid a hazard.
– Do not immerse the cleaner in water or other liquids (not even partially)
and must not be used in close proximity to bathtubs, showers, basins or other
containers with water, including pools! It must not be used in a damp or wet
environment! If the cleaner should still fall in the water, do not take it
out! Unplug the plug of the supply cord from the socket first and only then
take out the device. In such cases, the device shall be taken to an expert
service center to be checked for safety and correct functionality.
– After finishing work and before cleaning, always switch off the appliance
and disconnect it from the power supply by taking the power cord connector out
of the electric socket. – Before first use, read the user manual carefully,
look at the pictures and keep the manual for future reference. Consider the
instructions in the manual to be a part of the appliance and pass them on to
any other user of the appliance.
– This device is accessible to the wide public and is intended for indoor use
in homes or commercial buildings with a common environment according to (HD
60364-1:2008).
– Check if the information on the label corresponds with the voltage in your
electric socket.
– The plug of the supply cord must be connected to a correctly wired and
grounded socket.
– To provide additional safety features we recommend installing a residual
current device (RCD) with a nominal current not exceeding 30mA into the
circuit. Ask your revision technician or electrician for advice.
– Use the cleaner only in its working position in places where there is no
danger of it toppling and in a sufficient distance from flammable objects
(e.g. curtains, drapes, wood, etc.), heat sources (e.g. fireplace, stove,
el./gas cooker, radiators, etc.) and wet surfaces (e.g. sinks, basins, etc.).
– Do not use the device in places (e.g. workshops, manufacturing plants,
garages or other technical rooms) where there are hot, flammable, and
explosive materials (e.g. ashes, burning cigarette butts, gasoline, diluents,
dissolvent and aerosol fumes) or lubricants (e.g. fats, oils), chemicals,
caustic agents (e.g. acids, dissolvent, paints). Sucking in the flammable and
explosive gases, the filters or the cleaner can be damaged or can cause fire,
explosion or electrical shock. The air is ionized by microscopic el. sparking
(so-called corona discharge) which can set flammable substances on fire.
– High voltage inside the device may cause electrical shock.
– Do not use the device in an industrial environment (e.g. kitchens). This
device is not intended for filtering oil or fat contained in the air.
– Do not leave the device exposed to weather (e.g. rain, freeze, direct
sunlight, and temperatures exceeding 60 °C).
– Do not use textile or other materials (e.g. drapes, curtains, blankets) to
cover this device. If the air inlets and outlets are covered, it will cause
abnormal operation and may lead to fire or other accidents. Do not put the
cleaner on soft surfaces (e.g. bed, towels, kitchen towels, carpets) while it
is on.
– It is not acceptable to adjust the surface of the appliance in any way (e.g.
sticker wallpaper, foil, etc.)! Do not spray the device with insect repellents
or other flammable aerosol fumes.
– To ensure flawless circulation of all the air in the room, do not use the
device in niches, narrow hallways, or behind furniture, curtains, and drapes.
– Place the cleaner in a way that the outcoming flow of air is directed into
open space in the room and not towards obstacles (e.g. furniture) or cold
walls (danger of air moisture condensation).
– Place the cleaner in a way that the outcoming flow of air is directed into
open space in the room and not towards obstacles (e.g. furniture) or cold
walls (danger of air moisture condensation).
– The device must not be placed directly under the electrical socket. I must
not be placed in a corner of a room but at least 30 cm from the left/right
wall and the rear wall. At the same time, it must be placed at least 30 cm
from various objects (in the direction of the outlets
– flow of air) to enable free air circulation.
– There must not be any device with an open flame in the flow of the air
coming out from the cleaner because of the danger of burning process
interruption.
– Never let the flow of air blow on you (or animals) for an extended period of
time. It may cause health problems.
– Check the correct position of filters. Otherwise, the device can not be put
to operation.
– Do not handle the device if you have wet or damp hands.
– Pay attention not to put fingers, parts of the body, loose clothes, jewelry,
and other objects into the air openings when operating.
– Never look into the UV lamp or put your face near the front or back part
during operation
– To avoid overexposing to ultraviolet light, people and animals must be at
least 30 cm from the device. A short exposition to the light in close
proximity is safe.
– When bringing the device from a cold environment to a warmer one, let it
acclimate in room temperature (approx. 5 hours).
– Do not place the device near gas appliances, fireplaces, and open flames.
Not even near fireplaces that are not currently in use. Dust and soot may
circulate through the cleaner and consequently settle in the device and the
room. We do not recommend placing the device anywhere near burning candles,
paraffin lamps etc.
– Place the device in a good distance (at lest 1 meter) from a computer,
television or radio. You can thus avoid interference and distortion when
operating these devices.
– Do not do the following: do not pull nor transfer the device by the supply
cord, do not use the cord as a handle, and do not put the cord around sharp
edges, corners or in close proximity to a heat source.
– Do not turn on the device if it is standing on the supply cord.
– The device must not be left in operation unattended. If you need to leave
the room, always turn the cleaner off or turn it off and unplug it from the
socket (always pull by the plug, not the cord).
– Check the state of the supply cord regularly.
– Do not wind the supply cord around the device, this will extend its
lifetime.
– The supply cord must not be damaged by sharp or hot objects, openor flames,
and must not be immersed in water or bent over sharp edges. Never put it on
surfaces or let it hang over the edge of a table or desk. Tripping over or
pulling by the cord by for example children may cause toppling of the device
and serious injury!
– Turn the device off before unplugging.
– Do not let foreign objects to get into the device. High voltage inside the
device may cause electrical shock. Do not let children touch the device.
– Do not use the device outside!
– The air cleaner is an electrical device. If it is used in the presence of
children, supervision by a responsible adult person is necessary.
– Always place the device on flat, dry surface.
– Do not insert any objects into the openings.
– If you need to use an extension cord, it must not be damaged and correspond
with the standards in force.
– Never use the appliance if the power cord or fork is damaged, if it is not
working properly, if it has fallen on the ground and became damaged or if it
has fallen in the water. In such cases, take the appliance to a professional
service centre to check its safety and proper functions.
– The manufacturer is not liable for any damage caused by incorrect use of the
device (e.g. devaluation of food, injury, burns, fire) and is not liable for
the warranties in case of breaching the precautions mentioned above.
– Maintenance and cleaning must be performed precisely according to this
instruction manual.
– Apart form regular basic maintenance and cleaning (potential replacements)
of filters should any other maintenance and repair be done by a professional
service centre personnel. Not following this requirement may lead to warranty
termination.
– Do not touch the metal dust collectors until the residual voltage
discharges. Do so by connecting the plates with a grounded object such as
metal water piping, duct battery or radiator. – Check and clean the dust
collector regularly to avoid the extensive accumulation of dust which could
cause a short circuit or fire.
WARNING – After cleaning the dust collectors with a common cleaning agent (without abrasives) and water, it is necessary to leave it in a vertical position to dry thoroughly at least for 24 hours. Only then you may put it back into the device. Water could stay in many places (e.g. in folds of the plates) and could cause damage to the device. If the device is operated in a heavily polluted environment, it is necessary to clean it more regularly.
NAMES OF PARTS
A – Whole unit
A1 – Dust Collector
A2 – Dust Collector Button
A3 – Front Grill
A4 – Air Output Vent
A5 – Inbuilt Fan| A6 – ON/OFF Power Switch
A7 – rear Grill
A8 – Air Intake Vent
A9 – Inbulit UV Lamp
A10 – Bottom Stand
A11 – Release button
---|---
B – Control panel
Description of the air ionization function
The Ionic air cleaner contains an ionizer that emits negative ions into the
surrounding air. This process helps the device to clean the air more
effectively because such negative ons bind very small particles from the air
(positively charged particles such as pollen, dust, smoke, hair, etc.). Thus
created bigger particles are more easily caught on the dust collectors or they
may settle on positively charged surfaces in the room (floor. walls).
Ions are invisible particles that have positive or negative charges and are
naturally contained in the air around us, in water, or in soil. The natural
source of the ionization energy of primarily electromagnetic radiation from
space is the radioactive radiation from the Earth‘s core but also lightning
during storms. The highest concentration of negative ions in the air may be
observed after the storm, at waterfalls, in caves or in the mountains. On the
other hand, the smallest concentration may be observed in rooms where we spend
most of our time (rooms in our homes, streets, or air-conditioned rooms). The
ionization process is thus negatively influenced by humans due to our
intervention in nature, building materials used but also computer technology.
Because negative ions are a significant source of the human body’s energy and
they have a positive impact on our immunity, it is suitable to ensure their
higher occurrence (primarily in places where the balanced ratio of ions is
disrupted. Caution:
– Dust may settle on and around the device after longer use. This is not a
malfunction but proof of the cleaning effectiveness of the device. You may
remove such dust with a soft rush or a piece of a clean and damp cloth.
– Regular cleaning of the dust collectors is important for the proper function
of the device. If these collectors are excessively dirty, the cleaning
effectiveness will decrease and ome particles may stick to the walls,
furniture, and other home utensils.
INSTRUCTIONS FOR USE
Place the device at least 30cm against the wall and where children cannot
reach within a short range of distance.
Applicable Areas
The unit is applicable for any room with a size of max. 40 square meters. It
can be used in the bedroom, sitting room, etc. If the unit is to be used in a
smaller room, you may prefer to have the power setting on medium or low.
Operation ON/OFF
- Plug into a grounded domestic outlet. Press the ON/OFF button to initiate the operation. Press the ON/OF button again to stop operation.
Operation Setting Option
Negative oxygen ion Hi/Med/Lo options:
- Press the 0.ION button, the unit will then release negative ion with ion concentration level according to the number of times you press (in a cycle of LO > MED > HI), as indicated by the LED.
- Under HI: the appliance continues to release negative oxygen ions.
- Under MED: the unit runs a cycle of operating 60 seconds and then rest 60 seconds
- Under LO: the unit runs a cycle of operating for 15 seconds and then resting for 105 seconds
- Under MED and LO, negative oxygen ion is released alternately
- Choose the proper operation setting according to room size and air pollution level. The low LO mode is generally the most saving and suitable for small rooms. On the other hand, the high HI mode ensures maximal cleaning performance suitable for bigger rooms.
FUNCTION Option
- Inside the unit there is a circulating fan and a U.V. lamp. The fan purifies room air while the U.V. lamp cleans and sterilizes air at the same time. The unit runs the following sequence of functions according to the number of times you press the FUNCTION button:
TIME SETTING
- Press the TIME SETTING button when the unit is ON. According to the number of times you press the button, the setting will run in the following sequence as indicated by the LED. 1hour→2hour→3hour→4hour→5hour→6hour→7hour
REMOTE CONTROL
- This appliance can operate using a remote control. A shelf for the remote control is provided at the top of the unit to avoid accidental loss.
- The operation of remote control: Each press on the buttons of the remote control results in a „BEEP“ sound of different lengths (short or long), which guide you to select your preferred working status of the machine.
ON/OFF
| FAN MODE
| ION
| UV lamp
---|---|---|---
ON: 1 short| ON: 1 short| Low: 1 short| UV ON
OFF: 2 longs| OFF: 2 shorts| Med: 2 shorts| UV OFF
| | High: 3 shorts|
Hours to Stop| 1| 2| 3| 4| 5| 6| 7
---|---|---|---|---|---|---|---
Press BEEP sound
| 1 short| 2 shorts| 3 shorts| 4 shorts| 5 shorts| 6 shorts| 7 shorts
CLEANING AND MAINTENANCE
- Unplug the unit every time before cleaning
- Clean the dust collector and the metal pointers every one or two weeks or whenever there is an unusual sound during the operation. Otherwise, the unit will discontinue due to excessive dust on the collector. In general, a thorough cleaning will resume the unit to normal operation.
Cleaning the Dust Collection
- Remove the Dust Collector by holding the button at the top. Use mild detergent to wipe off the dust from each of the collection bars, then rinse with clean water and dry thoroughly. Wait until the dust collector is completely dry and then put it back into the unit. The dust collector is not entirely inserted into the unit until a „click“ sound is heard. A – Pull out the dust collector
B – Wipe the collector with a piece of damp cloth
Cleaning the Metal Pointers
- After a certain period of time, the zigzag-shaped metal pointers (ionization) that release negative ion will accumulate dust and dirt that will lower the efficiency of the appliance. Please clean the metal pointers (ionization) whenever the dust collector is cleaned.
- There are 2 cleaning lamellas with springs on the bottom part of the dust collector. If you clean the ionizer with cleaning lamellas with springs, hold the upper button of the dust collector and then repeat the process of removing and inserting the dust collector. When moving the dust collector up and down, the cleaning lamellas clean the dust from the metal points.
Cleaning the Appliance
- The interior of the appliance also accumulates dust. Before putting the dust collector back after cleaning, invert the entire unit for a few times to get rid of the accumulated dust.
- The exterior of the unit can be cleaned using mild detergent and then rinsed with clean water and dry.
- Do not allow any liquid to enter the unit. Wait until the unit is completely dry before use.
REPLACING THE UV LAMP
-
Lamps are effective for about 8,000 hours (about 12 months). Replace earlier if there is no „blue glow“ inside the housing.
-
Press the release button A11 on the bottom part of the grid and then remove the lid by lifting it and pulling it out (see picture 1 and 2). Turn the lamp softly and pull it out of its socket. Insert a new lamp of the same type.
-
The unit will not function while the dust collector is removed and/or the back cover is removed.
-
Always restore the dust collector and the back cover to their respective positions after cleaning.
SELF-CHECK BEFORE REPAIR
In case of malfunction, please check the following table to solve the problems. If problems persist, please contact your distributor or send to appointed maintenance center for repair.
MALFUNCTION | CAUSE | SOLUTION |
---|---|---|
Operating indicator off, machine stop operating | Electric plug falls off from | |
socket | Plug into an electric socket | |
Plug loses, does not contact well to the socket | Plug into the electric socket |
tightly and completely
Operating stop midway| The operation period set by the timer arrives its end|
No malfunction, restart the unit or reset the timer
Loud noise dirt| A dust collector is fully filled with di| Clean the dust
collector
Operate in a humid area| Place the machine to d dry place
The UV lamp is not lit| The uv lamp is broken or out of service| Refer to page
27 of the manual and replace the new lamp
Television and radio signals distorted or interfered
dirt| A dust collector is fully filled with di| Clean the dust collector
Operate within 1 meter from the television set or radio| Move the machine 1
meter away from the television set or radio
TECHNICAL SPECIFICATIONS
- Ionic Air Purifier
- Long electrostatic dust collector.
- High-performance disinfection UV technology
- Remote control for convenient use.
- An Independent fan ensures fast air circulation inside the room.
- Production of negative ions and active oxygen which remove smell and smoke.
- It is not necessary to remove the filter, easy to cleaning
- Timer for 1 to 7 hours
- Length of the supply cord 1.7 m
- Noise level 48 ≤ dB
- Color anthracite
- Power supply: 230V/50Hz
- Power Consumption: 25 W
- Size: 200x267x760 mm
- Weight: 4, 35 kg
- Applicable Area: 40 m
We reserve the right to change technical specifications.
WARNING: Do not use this product near water, in wet areas to avoid fire
or injury of electric current. Always turn off the product when you don’t use
it or before a revision. There aren’t any parts in this appliance that are
reparable by consumers. Always appeal to a qualified authorized service. The
product is under dangerous tension.
Old electrical appliances, used batteries and accumulators disposal
**** This symbol appears on the product, on the product accessories or on the
product packing means that the product must not be disposed of as household
waste. When the product/ battery durability is over, please, deliver the
product or battery (if it is enclosed) to the respective collection point,
where the electrical appliances or batteries will be recycled. The places,
where the used electrical appliances are collected, exist in the European
Union and in other European countries as well. By proper disposal of the
product, you can prevent possible negative impacts on the environment and
human health, which might otherwise occur as a consequence of improper
manipulation with the product or battery/ accumulator. Recycling of materials
contributes to the protection of natural resources. Therefore, please, do not
throw the old electrical appliances and batteries/ accumulators in the
household waste. Information, about where it is possible to leave the old
electrical appliances for free, is provided at your local authority, at the
store where you have bought the product. Information, on where you can leave
the batteries and accumulators for free, is provided to you at the store, at
your local authority.
Licensed by Hyundai Corporation, Korea.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>