STARLINK 2022 Square Dish User Guide
- June 3, 2024
- Starlink
Table of Contents
- STARLINK 2022 Square Dish
- PIPE ADAPTER MOUNT
- SHORT WALL MOUNT
- LONG WALL MOUNT
- GROUND POLE MOUNT
- PIVOT MOUNT
- FLASHING MOUNT
- STARLINK CABLE
- HIGH PERFORMANCE STARLINK CABLES
- HIGH PERFORMANCE STARLINK CABLES (CONT.)
- MESH WIFI ROUTER
- ETHERNET ADAPTER
- CABLE ROUTING KIT
- MASONRY ROUTING KIT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STARLINK 2022 Square Dish
PIPE ADAPTER MOUNT
Designed to attach to any pole with a max diameter of 2.5” (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.
Tools Needed:
7/16” (11.1 mm) Socket Wrench
Package Dimensions:
21 x 14 x 8.7 cm / 8.3” x 5.5” x 3.4”
Package Weight:
0.6 kg / 1.35 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
SHORT WALL MOUNT
Designed for installation on an exterior wall, near the top of the gable. Drilling required.
Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32” (4 mm) Drill Bit,
0.5” x 2.5” (12.5 mm x 63.5 mm) Socket, Pencil
Package Dimensions:
21 x 14 x 8.7 cm / 8.3” x 5.5” x 3.4”
Package Weight:
0.6 kg / 1.4 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
LONG WALL MOUNT
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.
Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32” (4 mm) Drill Bit,
0.5” x 2.5” (12.5 mm x 63.5 mm) Socket, Pencil
Package Dimensions:
48.5 x 14 x 11.9 cm / 19.1” x 5.5” x 4.7”
Package Weight:
0.6 kg / 1.4 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
GROUND POLE MOUNT
Designed for in-ground installation when roof or wall mounting is not possible; requires digging.
Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and Water
Package Dimensions:
45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cm
Package Weight:
9.43 lbs / 4.27 kg
Compatibility:
Rectangular Starlink High Performance Starlink
PIVOT MOUNT
Designed for installation on shingled roofs, recommend installing closer to
edge for cable routing. Not recommended for tile, slate, and clay roofing.
For best results, Starlink should be installed as close to vertical as
possible.
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket W rench
Package Dimensions:
24.7 x 14 x 7.9 cm / 9.7” x 5.5” x 3.1”
Package Weight:
1.0 kg / 2.21 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
FLASHING MOUNT
Designed for installation on shingled roofs, recommend installing closer to
edge for cable routing. Not recommended for tile, slate, and clay roofing.
For best results, Starlink should be installed as close to vertical as
possible.
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench
Package Dimensions:
24.7 x 14 x 7.9 cm / 9.7” x 5.5” x 3.1”
Package Weight:
1.0 kg / 2.21 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
STARLINK CABLE
22.9 m (75 ft) Starlink Cable is designed to replace the standard cable from the Starlink Kit in case of damage.
Package Dimensions:
14.9 x 5.1 x 43.6 cm / 5.87” x 2.0” x 17.17”
Package Weight:
1.4 kg / 3.09 lbs
Compatibility:
Rectangular Starlink
45.7 m (150 ft) Starlink Cable is designed to replace the standard cable from
the Starlink Kit when additional length is needed between your install
location and the router.
Package Dimensions:
31.1 x 8.9 x 32.4 cm / 12.25” x 3.5” x 12.75”
Package Weight:
2.75 kg / 6.06 lbs
Compatibility:
Rectangular Starlink
HIGH PERFORMANCE STARLINK CABLES
30 m (98 ft) Starlink Router Cable is designed to replace the standard cable from the Starlink Kit when additional length is needed between the Power Supply and the Starlink Router.
Package Dimensions:
300 x 270 x 67 cm / 118.1” x 106.3” x 26.4”
Package Weight:
1.9 kg / 4.19 lbs
Compatibility:
High Performance Starlink
30 m (98 ft) Starlink Ethernet Cable is designed to replace the standard cable from the Starlink Kit when additional length is needed between the Power Supply and the RJ45 connector (for third party routers or devices).
Package Dimensions:
300 x 270 x 67 cm / 118.1” x 106.3” x 26.4”
Package Weight:
1.9 kg / 4.19 lbs
Compatibility:
High Performance Starlink
HIGH PERFORMANCE STARLINK CABLES (CONT.)
25 m (82 ft) Starlink Cable is designed to replace the standard cable from the Starlink Kit (between the Starlink and the Power Supply) in case of damage.
Package Dimensions:
220 x 510 x 64 cm / 86.6” x 200.8” x 25.2”
Package Weight:
2.9 kg / 6.39 lbs
Compatibility:
High Performance Starlink
MESH WIFI ROUTER
Starlink Mesh WiFi Routers wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.
Package Dimensions:
22.4 x 28.6 x 10 cm / 8.8” x 11.3” x 4”
Package Weight:
1.72 kg / 3.75 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
Starlink App
ETHERNET ADAPTER
Designed to connect a device directly to the Starlink Router for a wired connection. Supports up to 1 Gbps speeds.
Package Dimensions:
16.5 x 11.4 x 3.6 cm / 6.5” x 4.5” x 1.5”
Package Weight:
0.15 kg / 0.33 lbs
Compatibility:
Rectangular Starlink High Performance Starlink
CABLE ROUTING KIT
Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.
Tools Needed:
Drill, Stud / Electrical Finder
Package Dimensions:
34.9 x 13.3 x 4.4 cm / 3.75” x 5.25” x 1.75”
Package Weight:
0.38 kg / 0.83 lbs
Compatibility:
Rectangular Starlink High Performance Starlink
MASONRY ROUTING KIT
Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.
Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit,
Stud / Electrical Finder, Goggles, Gloves, and Mask
Package Dimensions:
35.2 x 16.5 x 4.4 cm / 13.875” x 6.5” x 1.75”
Package Weight:
1.0 kg / 2.1 lbs
Compatibility:
Rectangular Starlink
High Performance Starlink
THANK YOU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>