STARLINK Circular Internet Dish Accessories Installation Guide
- June 5, 2024
- Starlink
Table of Contents
STARLINK Circular Internet Dish Accessories
ACCESSOIES
PIPE ADAPTER
Designed to attach to any pole with a max diameter of 2.5” (64 mm). Slide
adapter over the top of the existing pole, fasten provided screws, and drop
Starlink in.
Tools Needed:
7/16” (11.1 mm) Socket Wrench
Package Dimensions:
8” x 5.5” x 3” / 20.7 x 14 x 8 cm
Package Weight: 3.1 lbs / 1.39 kg
Compatibility : Circular Starlink
VOLCANO MOUNT
Designed for installation on shingled roofs, requires drilling. Not
recommended for tile, slate, and clay roofing. Starlink must be mounted within
35° of vertical.
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench
Package Dimensions:
13” x 6.5” x 3” / 33 x 16.5 x 7.6 cm
Package Weight: 2.6 lbs / 1.2 kg
Compatibility : Circular Starlink
FLASHING MOUNT
Designed for water-tight protection when installing Starlink on shingles and
provides storage for extra cable. Requires additional purchase of Volcano Roof
Mount.
Tools Needed:
Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm) Socket
Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar, Roof Cement,
Measuring Tape, Stud Finder, Pencil, and Goggles
Package Dimensions:
15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cm
Package Weight: 7 lbs / 3.2 kg
Compatibility : Circular Starlink
GROUND POLE MOUNT
Designed for in-ground installation when roof or wall mounting is not
possible; requires digging.
Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and Water
Package Dimensions:
95.75” x 4.25” x 4.25” / 243 x 10.8 x 10.8 cm
Package Weight: 13 lbs / 5.9 kg
Compatibility : Circular Starlink
CABLE ROUTING KIT
Designed for drilling through most walls. Not recommended for masonry,
concrete, or hard coat stucco. Best for customers with prior internet cable
routing experience and installation; must be comfortable drilling through
walls. Kit includes a spade bit, drill bit, cable routing tool, silicone
sealant, grommets, and wall clips.
Tools Needed:
Drill, Stud / Electrical Finder
Package Dimensions:
3.75” x 5.25” x 1.75” / 34.9 x 13.3 x 4.4 cm
Package Weight: 0.83 lbs / 0.38 kg
Compatibility : Circular Starlink
MASONRY ROUTING KIT
Designed for drilling through masonry, concrete or hard coat stucco (excluding
EIFS) walls. Best for customers with prior internet cable routing experience
and installation; must be comfortable drilling through walls. Kit includes a
spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall
clips.
Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder,
Goggles, Gloves, and Mask
Package Dimensions:
13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm
Package Weight: 2.1 lbs / 1 kg
Compatibility : Circular Starlink
PIPE ADAPTER MOUNT
Designed to attach to any pole with a max diameter of 2.5” (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.
Tools Needed:
7/16” (11.1 mm) Socket Wrench
Package Dimensions:
8.3” x 5.5” x 3.4” / 21 x 14 x 8.7 cm
Package Weight: 1.35 lbs / 0.6 kg
Compatibility : Rectangular Starlink
SHORT WALL MOUNT
Designed for installation on an exterior wall, near the top of the gable.
Drilling required.
Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32” (4 mm) Drill Bit,
0.5” x 2.5” (12.5 mm x 63.5 mm) Socket, Pencil
Package Dimensions:
8.3” x 5.5” x 3.4” / 21 x 14 x 8.7 cm
Package Weight: 1.4 lbs / 0.6 kg
Compatibility: Rectangular Starlink
LONG WALL MOUNT
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.
Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level, 5/32” (4 mm) Drill Bit,
0.5” x 2.5” (12.5 mm x 63.5 mm) Socket, Pencil
Package Dimensions:
19.1” x 5.5” x 4.7” / 48.5 x 14 x 11.9 cm
Package Weight : 1.4 lbs / 0.6 kg
Compatibility : Rectangular Starlink
GROUND POLE MOUNT
Designed for in-ground installation when roof or wall mounting is not possible; requires digging.
Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and
Water
Package Dimensions:
45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cm
Package Weight: 9.43 lbs / 4.27 kg
Compatibility: Rectangular Starlink
PIVOT MOUNT
Designed for installation on shingled roofs, recommend installing closer to edge for cable routing. Not recommended for tile, slate, and clay roofing. For best results, Starlink should be installed as close to vertical as possible.
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench
Package Dimensions:
9.7” x 5.5” x 3.1” / 24.7 x 14 x 7.9 cm
Package Weight: 2.21 lbs / 1.0 kg
Compatibility: Rectangular Starlink
STARLINK CABLE
75’ Starlink Cable is designed to replace the standard cable from the Starlink Kit in case of damage.
Package Dimensions:
5.87” x 2.0” x 17.17” / 14.9 x 5.1 x 43.6 cm
Package Weight: 3.09 lbs / 1.4 kg
Compatibility : Rectangular Starlink
150’ Starlink Cable is designed to replace the standard cable from the
Starlink Kit when additional length is needed between your install location
and the router.
Package Dimensions:
12.25” x 3.5” x 12.75” / 31.1 x 8.9 x 32.4 cm
Package Weight : 6.06 lbs / 2.75 kg
Compatibility : Rectangular Starlink
ETHERNET ADAPTER
Designed to connect a device directly to the Starlink Router for a wired connection. Supports up to 1 Gbps speeds.
Package Dimensions:
6.5” x 4.5” x 1.5” / 16.5 x 11.4 x 3.6 cm
Package Weight : 0.33 lbs / 0.15 kg
Compatibility : Rectangular Starlink
CABLE ROUTING KIT
Designed for drilling through most walls. Not recommended for masonry,
concrete, or hard coat stucco. Best for customers with prior internet cable
routing experience and installation; must be comfortable drilling through
walls. Kit includes a spade bit, drill bit, cable routing tool, silicone
sealant, grommets, and wall clips.
Tools Needed:
Drill, Stud / Electrical Finder
Package Dimensions:
3.75” x 5.25” x 1.75” / 34.9 x 13.3 x 4.4 cm
Package Weight: 0.83 lbs / 0.38 kg
Compatibility : Rectangular Starlink
MASONRY ROUTING KIT
Designed for drilling through masonry, concrete or hard coat stucco (excluding
EIFS) walls. Best for customers with prior internet cable routing experience
and installation; must be comfortable drilling through walls. Kit includes a
spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall
clips.
Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder,
Goggles, Gloves, and Mask
Package Dimensions:
13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm
Package Weight : 2.1 lbs / 1 kg
Compatibility : Rectangular Starlink
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>