STARLINK Circular Hood-Mounted Internet Dish Accessories Installation Guide
- June 5, 2024
- Starlink
Table of Contents
STARLINK Circular Hood-Mounted Internet Dish Accessories
PIPE ADAPTER
Designed to attach to any pole with a max
diameter of 2.5” (64 mm). Slide adapter over the top of the existing pole,
fasten provided screws, and drop Starlink in.
-
Tools Needed:
7/16” (11.1 mm) Socket Wrench -
Package Dimensions:
8” x 5.5” x 3” / 20.7 x 14 x 8 cm -
Package Weight: 3.1 lbs / 1.39 kg
Compatibility: Circular Starlink
VOLCANO MOUNT
Designed for installation on shingled roofs,
requires drilling. Not recommended for tile, slate, and clay roofing. Starlink
must be mounted within 35° of vertical.
-
Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench -
Package Dimensions:
13” x 6.5” x 3” / 33 x 16.5 x 7.6 cm -
Package Weight: 2.6 lbs / 1.2 kg
Compatibility: Circular Starlink
FLASHING MOUNT
Designed for water-tight protection when
installing Starlink on shingles and provides storage for extra cable. Requires
additional purchase of Volcano Roof Mount.
-
Tools Needed:
Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm) Socket Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar, Roof Cement, Measuring Tape, Stud Finder, Pencil, and Goggles -
Package Dimensions:
15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cm -
Package Weight: 7 lbs / 3.2 kg
Compatibility: Circular Starlink
GROUND POLE MOUNT
Designed for in-ground installation
when roof or wall mounting is not possible; requires digging.
-
Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves, Concrete Mix, and Water -
Package Dimensions:
95.75” x 4.25” x 4.25” / 243 x 10.8 x 10.8 cm -
Package Weight: 13 lbs / 5.9 kg
Compatibility: Circular Starlink
CABLE ROUTING KIT
Designed for drilling through most walls.
Not recommended for masonry, concrete, or hard coat stucco. Best for customers
with prior internet cable routing experience and installation; must be
comfortable drilling through walls. Kit includes a spade bit, drill bit, cable
routing tool, silicone sealant, grommets, and wall clips.
-
Tools Needed:
Drill, Stud / Electrical Finder -
Package Dimensions:
3.75” x 5.25” x 1.75” / 34.9 x 13.3 x 4.4 cm -
Package Weight: 0.83 lbs / 0.38 kg
Compatibility: Circular Starlink
MASONRY ROUTING KIT
Designed for drilling through masonry, concrete
or hard coat stucco (excluding EIFS) walls. Best for customers with prior
internet cable routing experience and installation; must be comfortable
drilling through walls. Kit includes a spade bit, drill bit, cable routing
tool, silicone sealant,
grommets, and wall clips.
-
Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit,
Stud / Electrical Finder, Goggles, Gloves, and Mask -
Package Dimensions:
13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm -
Package Weight:
2.1 lbs / 1 kg
Compatibility: Circular Starlink
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>