anko 43167142 Punch Needle Kit Instruction Manual
- June 4, 2024
- Anko
Table of Contents
anko 43167142 Punch Needle Kit
KIT INCLUDES
Punch Needle
|
Needle Threader
|
Fabric with
printing
---|---|---
Hoop
|
Yarns
HOW TO THREAD A NEEDLE
-
Insert the threoder from the needle tip to needle top.
-
Place the end of the yorn into the threader and pull the threader back out of the needle tip.
-
Insert the threader through the hofe of the needle tip and place the end of the yarn rnto the threader and pull back out of the hole. Remove the yarn from the threader. Threading is completed.
FLAT STITCHES
-
Place the fabrfc in the hoop with theoutlined side of fabric facing upwards.
-
Refer to the image on box for yarn colour. Holding the needle like o pencil press the needle all the way through the fabric, so the grip of the needle touches the fabric. Then, lift needle out off obric just enough to move onto the next stitch.
TIPS
- The punch needle should penetrate all the way through the fabric, so ttlot the grip of the needle touches the fabric.
- The needle must be pushed oll the way in on eooh stiteh. to create an even look.
- Lift needfe out of fobric, just enough t’o move onto next stitch. Keep the needle as close to the fobrfc os poosible.
- Lifting the needle 100 high shortens the loops on the f rant of the design and creates umvonted loops on the bock.
MADE IN CHINA
Documents / Resources
| anko
43167142 Punch Needle
Kit
[pdf] Instruction Manual
43167142 Punch Needle Kit, 43167142, Punch Needle Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>