SURFACE MAXX SGY-PWA95 18-FT Pressure Washer Extension Wand Instruction Manual
- June 3, 2024
- Surface Maxx
Table of Contents
SURFACE MAXX SGY-PWA95 18-FT Pressure Washer Extension Wand
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Telescoping Wand | 1 |
| B | Telescoping Wand | 1 |
| C | Telescoping Wand | 1 |
| D | Telescoping Wand | 1 |
| E | Telescoping Wand | 1 |
| F | Telescoping Wand | 1 |
| G | Nozzle with Hose | 1 |
| H | Harness | 1 |
| I | Adapter | 1 |
PRODUCT SPECIFICATIONS
| COMPONENT | SPECIFICATIONS |
|---|
Connections
Adapter Length
Maximum Pressure Maximum Water Flow Maximum Water Temperature| M22 Inlet,
1/4 in. Quick Connect Tip, Threaded Accessory Port
Female M22 x 3/8 in. Male Quick Connect 5 ft. extends to 18 ft.
up to 4,200 PSI 8GPM
140°F (60°C)
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
o reduce the risk of injury, the user must read and understand this operator’s
manual as well as the operator’s manual for their pressure washer before using
this product. Failure to follow all
Warnings and precautions may result in death, serious personal injury, or
property damage.
Warnings
Keep at least 10 feet away from power lines. Do not touch or aim spray at
electrical wiring of any kind.
Do not extend or retract the telescoping wand or change nozzles or accessories
while spraying o while the wand is under pressure. Turn off the pressure
washer, shut off the water supply, point the nozzle in a safe direction, and
pull the trigger to release water pressure before making any changes.
Do not use the telescoping wand while on a ladder or scaffolding.
When using the telescoping wand at any position less than fully extended, make
sure the high pressure hose is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress. Keep the hose clear
of the working area.
Do not exceed the maximum rated pressure, volume, or temperature listed in the
product specifications.
Do not remove or alter any warning labels included on the telescoping wand.
Before beginning operation, make certain the area you plan to work in is clear
of obstrucions or hazards. Maintain proper balance and control of telescoping
wand at all times.
To minimize the risk of kickback, grip the telescoping wand firmly with both
hands. A firm grip together with a stiff arm will help you maintain control of
the telescoping wand if kickback occurs.
PREPARATION
Before assembling or operation of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated Assembly Time: 10 minutes
- Tools Required for Assembly: Adjustable Wrench (not included)
SSEMBLING THE TELESCOPING WAND
See Figures 1 – 3.
- To assemble the 6 sections of the telescoping wand:
NOTE: For easier assembly, lay each wand section out on the ground from smallest to largest before beginning. Take care to avoid kinking the hose during assembly. Make sure the lock levers are unlocked prior to assembling. To unlock pull up on the base of the lock lever
a. Starting with part F, feed hose into the locking end of the smallest
wand section E and feed the hose through the tube.
b. Slide wand section E over wand section
F all the way up to the bottom of the adjustable head and then push down
on the lock lever.
c. Feed the hose into the locking end of wand section D and feed the hose
through the tube. Slide wand section D over wand section E all the way up and
push down on the lever to lock. d. Repeat the previous step with remaining
sections C, B and A.
-
Screw on the hose fitting into the water outlet and tighten it clockwise .
-
Pivoting and locking construction for 3 position angle adjustable with 20 – 40 – 60 degrees by loosening the lock nut and sliding it towards the wand. Once it is in the desired position, slide the nut away and tighten.
WEAR THE HARNESS
Choose step 1 for right handed operators.
Choose step 2 for left handed operators.
- HOW TO WEAR HARNESS FOR RIGHT HANDED OPERATORS Place padded shoulder strap on your left shoulder. Wrap waist belt around waist and fasten buckle. Buckle should rest against the right side of your torso as you look down.
Adjust shoulder strap to position waist belt at desired height.
NOTE: It is recommended that the harness be located between your waist
and chest. This will allow for better support and control when using the wand.
Tighten the waist belt.
Fasten wand adapter to telescoping wand and connect buckle to support belt.
- HOW TO WEAR HARNESS FOR LEFT HANDED OPERATORS
Place padded shoulder strap on your right shoulder.
Wrap waist belt around waist and fasten buckle. Buckle should rest against the left side of your torso as you look down.
Adjust shoulder strap to position waist belt at desired height.
NOTE : It is recommended that the harness be located between your waist and chest. This will allow for better support and control when using the wand.
Tighten the waist belt
.
Fasten wand adapter to telescoping wand and connect buckle to support belt.
USING THE TELESCOPING WAND
See Figures 1 – 2.
WARNING: To reduce the risk of electrocution, possible serious personal
injury or property damage, spray the pressure stream in a safe direction away
from all electrical devices and bystanders. Ensure proper connection of all
accessories before starting any cleaning project. Fits most pressure washers.
Ensure compatibility and proper it before using this accessory. Wear safety
glasses or goggles; do not point at people, pets, electrical devices. urn off
the pressure washer before changing or adjusting accessories. For cold water
use only. For outdoor use only – store indoors. Save these instructions. Refer
to them frequently and use them to instruct other users. If you loan
WARNING: Do not use pivoting nozzles when using the telescoping and. Pivoting nozzles can increase the risk of kickback and could result in possible serious personal injury.
-
The handle features a lock button to prevent the trigger from being unintentionally pulled while movingto a different spot or adjusting the telescoping wand. To lock the trigger, push down and release the yellow safety button (located at the top of the trigger). The safety button will pop out and will not let the trigger to be pulled. To unlock the safety lock, push it down and release, the trigger can now be squeezed.
NOTE : Always engage the trigger lock before moving or adjusting the telescoping wand . . -
Connect the high pressure hose of your pressure washer to the inlet coupler on the telescoping wand.
NOTE: The inlet coupler on the telescoping wand is designed to connect to a threaded connector on your pressure washer’s high pressure hose. If your high Hose with threaded coupler \ Hose with quick connect coupler Quick \connect adapt\ 1 I ‘ll Safety lock pressure hose has a quick connect coupler instead, install the adaptor provided before connecting to the telescoping wand. -
The telescoping wand can be used retracted, extended, or at any point in between. To adjust the length of any of the wands, open the lock lever, move the wand to the desired length, then close the lock lever to secure.
NOTE: Never fully extend the wands. Do not extend beyond the lines marked on the wands. Thi allows in. of wand to remain inside the next section to help provide stability during operation . -
Before attempting to use the telescoping wand on your project, move away from the project area and extend the wand to 50% of its available length. Depress the trigger to release a stream of water so that you can get a feel for how the unit will perform during use.
-
The telescoping wand will kickback when the trigger is released and/or pressure is lost. Before releasing the trigger, move the nozzle at least 10 feet away from the surface being cleaned and make sure you have solid footing.
WARNING : he telescoping wand will flex as pressure is added or lost. Fully understand how the wand moves hen adding or lessening pressure before attempting a cleaning project. If you are not completely comfortable with the movement of the wand under changing pressure conditions, do not use this product. Loss of control of the telescoping wand could result in possible serious personal injury. -
Adjust the height of the telescoping wand as needed to fit your project requirements.
WARNING : Lengthen the telescoping wand only as much as necessary for the project you are attempting and remain in full control of the telescoping wand at all times. Loss of control of the telescoping wand could result in possible serious personal injury . -
Move to the project area, raise the wand and aim toward the area to be cleaned. Squeeze the trigger to begin spraying.
-
When placing the wand on the ground, make sure to set it on the ground gently to avoid break in any of the plastic components or accessories.
CARE AND MAINTENANCE
De-pressurize by squeezing the gun trigger until all of the water has been drained out of the unit.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Connections leak. |
- Loose connections
- Sealant worn..
- O-ring is worn.
|
- Retighten fitting
- Reapply pipe tap
- Replace O-ring.
Unit won’t spray.|
- Unit power/ water supply off
- Unit is clogged.
|
- Consult owner’s manual
- Reverse flush unit with water.
Wand section will not stay in place.|
- Lever lock is loose
- lever lock is broken.
|
- Try tightening the
- screw on the lock lever
- Replace lever lock.
WARRANTY
TWO YEARS LIMITED WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for two (2)years from date of purchase. If within this period a product is found to be defective in material or workmanship, the product must be returned with a copy of the bill of sale as proof of purchase to the manufacturer. This warranty does not cover the product becoming defective due to misuse, accidental damage, improper handing and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on how long an implied warranty lasts, the above exclusions and limitations may not apply to you. This warranty gives you specific rights and you may also have other rights which vary from state
Questions, problems, missing parts? Before returning to your
retailer, call our customer ~ service department at +1
866-870-9930, 9 a.m. – 5 p.m., EST,
Monday – Friday.
Printed in China
www.surfacemaxx,com