BLAUPUNKT IM715 Inflatable Mattress Owner’s Manual
- June 3, 2024
- Blaupunkt
Table of Contents
IM715 Inflatable Mattress
Owner’s Manual Inflatable mattress
IM715/720/820
IM715 Inflatable Mattress
IMPORTANT NOTES
- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.This device is for domestic use only. Do not use for any other purposes.
- The device should only be connected to an socket with values corresponding to the values on the rating label.
- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
- Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
- Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
- Never use the product close to combustibles.
- Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.
- Only Original accessories should be used, as well asaccessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
- Read the instructions before using the mattress.
- Suffocation risk: do not put babies under 18 months old on the mattress.
- The mattress is not a toy, do not let children play with the mattress.
- Keep the mattress away from fire, heaters and other hot objects and heat sources. The mattress may melt or catch fire.
- Do not use a hair dryer to inflate the mattress.
- Do not smoke while using the mattress.
- The mattress is not a life-saving item. It is not intended for use in water and is not a water or floating toy.
- Do not stand or walk on the mattress. Do not jump on the mattress (risk of falling or damaging the mattress).
- Keep the mattress away from sharp objects. Make sure there are no sharp objects on the surface where the mattress will be placed. Do not move the mattress by rubbing against surfaces. It should be moved by shifting.
- Keep pets away from the mattress.
- The air pressure in the mattress may vary depending on the ambient temperature. If the mattress is too soft, inflate it.
- Avoid sleeping on the edge of the mattress.
- Keep the valves free of debris.
- The pump should not be used for more than 10 minutes of continuous operation at a time.
- Unplug the pump after use.
**** Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. Used appliance should be delivered to the dedicated
collecting points due to hazardous components, which may affect the
environment. Do not dispose this appliance In the common waste bin.
Environmental informationAll unnecessary packaging has been omitted. We have
tried to make the packaging easy to separate into three materials: cardboard
(box), polystyrene foam (buffer) and poly ethylene (bags, protective foam
sheet). Your system consists of material which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, exhausted batteries and old
equipment.
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
PREPARING THE MATTRESS
Unroll the mattress and lay it on a clean flat surface.
To inflate the mattress with air, close the side valve. Remove the power cord
from the compartment, plug the power cord plug into the power source outlet.
Switch the pump knob to the “inflate” position. The pump will start working
to inflate the mattress. When the mattress is sufficiently inflated, turn the
pump off by turning the knob to the “off” position. Disconnect the power cord
from the power source and put it in the compartment. Do not use the mattress
when the pump is connected to the power source.
STORING THE MATTRESS
After use, drain the air from the mattress. To do this, open the valves, and
gently fold the mattress by pressing it.
You can also use a pump to pump out the air. To do this, connect it to a power
source, set it to the “deflate” position.
Store the folded mattress in a dry place.
REPAIRING A MATTRESS LEAK
If a mattress leak is found, inflate the mattress. Locate the suspected
location of the air leak by listening. Gently moisten the suspected area with
soapy water. At the location of the air leak, bubbles would appear.
Empty the mattress of air, clean and degrease the area around the leak well.
Apply an appropriately sized patch at the air leak site. Smooth it out. Leave
the patch pinched with a heavier object for 24 hours to dry.
TECHNICAL PARAMETERS
Power supply: 220-240 V~50 Hz,140 W
Material: PVC, velour
Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A 02-801
Warsaw, Poland phone: +48 22 688 08 00
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 688 08 33
Email: sda@blaupunkt.pl
Enjoy it.
All rights reserved. All brand names are registered trademarks of their
respective owners.
Specifications are subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>