LAMAX Dots2 In-ear Headphones User Guide
- June 3, 2024
- LAMAX
Table of Contents
LAMAX Dots2 In-ear Headphones
Controls
- Turn On Hold down the multifunction button for 3 seconds
- Turn Off Hold down the multifunction button for 3 seconds
- Play / Pause Press the multifunction button
- Next Track Press the multifunction button 2 times
- Previous Track Press the multifunction button 3 times
- Answer/End Call Press the multifunction button
- Reject Call Hold the multifunction button for 1 second
- Last Number Redial Press the multifunction button 4 times
- Activate Mobile Assistant Hold the multifunction button for 2 second
Switching On
The earphones turn on automatically when removed from the charging station. To switch on manually, press and hold the multifunction button for 3 seconds. You must manually turn on both earphones separately. When switched on, there is an audible sound and the white LED flashes.
Switching Off
The earphones turn off automatically when inserted into the charging station.
To turn off manually, hold the multifunction button on one of the earphones
for 3 seconds. When switched off, an audible notification sounds and the red
LED flashes.
Pairing
- Remove the earphones from the charging station. The earphones will automatically connect to each other and an audible notification will sound. The left earphone is the main one, and ready for pairing is indicated by alternating blinking of white and red LEDs.
- Turn on Bluetooth on your device and look for LAMAX Dots2 in the list of available Bluetooth devices. After successful pairing you will hear an audible notification.
For pairing problems, remove the earphones from the paired devices list on your phone. Turn off the earphones manually and hold the multifunction button for 5 seconds until both earphones blink alternately red and white, then insert them into the charging station and pair as described in 1.
Charging
To charge the charging station, connect the cable to the USB-C port on the
back and the end of the cable into a USB power supply with a maximum voltage
of 5V. When charging, the LEDS will light up gradually according to the charge
status. When fully charged, all 4
LEDs will be lit. You can also charge the charging station with a Qi-
compatible wireless charger.
To charge the earphones, insert them into a charged charging station. The LED
light in the headphones flashes twice and then turns red during charging. When
fully charged, it goes out.
Parameters
- Wireless technology Bluetooth 5.0
- Max. pairing distance up to 10 meters
- Supported codecs AAC, SBC
- Earphone battery capacity 50 mAh
- Charging station capacity 550 mAh
- Earphone charging time approx. 2 hours
- Playback time up to 6 hours
- Weight of one earphone 3 g
- Weight with charging station 42 g
Subject to printing errors.
The latest version of the user guide can be downloaded here: https://www
.lamax-electronics.com/downloads/lamax-dots2/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>