CyberPower P6WSUC 6 Outlet Surge Protector User Manual
- June 3, 2024
- CyberPower
Table of Contents
P6WSUC 6 Outlet Surge Protector
User Manual
6-OUTLET
SURGE PROTECTOR
(6 AC OUTLETS & 2 USB PORTS)
P6WSUC
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberPowerSystems.com
FEATURES
- USB-A Charging Port (1)
- USB-C Charging Port (1)
- Swiveling Standard Grounded Outlets (6)
- Protected LED Indicator Illuminated when the surge protection feature is working properly.
- Grounded LED Indicator Illuminated when a properly grounded AC outlet is detected.
SPECIFICATIONS
| Model Number: | P6WSUC |
|---|---|
| Outlets: | Swiveling Standard Grounded |
Outlets (6), USB Charging Ports (2)
Surge Protection:| 2000 Joules
Electrical Rating:| 125 V/15 A/1875 W/60 Hz
USB-A Charging Output:| 5 V/2.4A
USB-C Charging Output:| 5 V/15 W
USB Total output:| 5V/3.6A Shared
UL Clamping Voltage:| UL 1449/600 V (L-N, L-G, N-G)
Maximum Peak Current:| 60,000 A
3 AC Lines Protected:| L-N: 30,000 A; L-G: 15,000 A;
N-G: 15,000 A
Response Time:| Less than 1 nanosecond
Attenuation:| Up to 32 dB
EMI/RFI Filtration:| 150 kHz to 100 MHz
WARNING: This product can expose you to chemicals including bisphenol A
(BPA) and styrene (ABS), which is known to the State of California to cause
reproductive harm and cancer. For more information, go to
www.P65Warnings.ca.gov.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is not at least 10 meters (30 feet) of
wire between the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an
internal protection that will disconnect the surge protective component at the
end of its useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in the surge protector,
move the surge protector to a different grounded three-prong AC outlet. If it
still does not light, return the product to the retailer for assistance. If
the surge protector appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional electrician.
If the protected indicator does not light, the surge protector’s AC lines are
no longer protected from surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the protection
circuitry and rendered it inactive. The surge protector has protected your
connected equipment as designed, but it will not protect against future
surges, and spikes. It should be replaced.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more
information regarding:
- Product information and certifications
- Product warranty
- Connected equipment guarantee
TECHNICAL SUPPORT
Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2022 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
8-OUTLET SURGE PROTECTOR (8 AC OUTLETS & 2 USB PORTS)
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberPowerSystems.com
FEATURES
- USB-A Charging Port (1)
- USB-C Charging Port (1)
- Swiveling Standard Grounded Outlets (6)
- Protected LED Indicator Illuminated when the surge protection feature is working properly.
- Grounded LED Indicator Illuminated when a properly grounded AC outlet is detected.
SPECIFICATIONS
| Model Number: | P6WSUC |
|---|---|
| Outlets: | Swiveling Standard Grounded |
Outlets (6), USB Charging Ports (2)
Surge Protection:| 2000 Joules
Electrical Rating:| 125 V/15 A/1875 W/60 Hz
USB-A Charging Output:| 5 V/2.4A
USB-C Charging Output:| 5 V/15 W
USB Total output:| 5V/3.6A Shared
UL Clamping Voltage:| UL 1449/600 V (L-N, L-G, N-G)
Maximum Peak Current:| 60,000 A
3 AC Lines Protected:| L-N: 30,000 A; L-G: 15,000 A;
N-G: 15,000 A
Response Time:| Less than 1 nanosecond
Attenuation:| Up to 32 dB
EMI/RFI Filtration:| 150 kHz to 100 MHz
WARNING: This product can expose you to chemicals including bisphenol A
(BPA) and styrene (ABS), which is known to the State of California to cause
reproductive harm and cancer. For more information, go to
www.P65Warnings.ca.gov.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is not at least 10 meters (30 feet) of
wire between the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an
internal protection that will disconnect the surge protective component at the
end of its useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in the surge protector,
move the surge protector to a different grounded three-prong AC outlet. If it
still does not light, return the product to the retailer for assistance. If
the surge protector appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional electrician.
If the protected indicator does not light, the surge protector’s AC lines are
no longer protected from surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the protection
circuitry and rendered it inactive. The surge protector has protected your
connected equipment as designed, but it will not protect against future
surges, and spikes. It should be replaced.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more
information regarding:
- Product information and certifications
- Product warranty
- Connected equipment guarantee
TECHNICAL SUPPORT
Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2022 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
References
- CyberPower UPS Systems, Battery Backup, PDUs, USB Surge Protectors
- Support | CyberPower
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>