vocolinc DL2202 Smart Desk Lamp User Manual

vocolinc DL2202 Smart Desk Lamp

Product Overview

Handsfree voice control and with cool to warm whites, the DL2202 Smart Desk Lamp is here to make your home truly yours. Utilizing the latest in Wi-Fi technology, the DL2202 Smart Desk Lamp enables you to set the color temperature and intensity of any area via the VOCOlinc app. With countless uses and applications, an all-new world awaits you with the VOCOlinc DL2202. You can customize your personal lighting from anywhere with an active internet connection.

Touch Button

prefer(5 Levels).

From left to right, Brighten the light From right to left, Dim the light

3| Brightness max
4| Mode Button| Tap to change color temperature
5| Wireless Charge| Area for Wireless charging
6| Status LED| Smart Desk Lamp Status

DL2202 Smart Desk Lamp Status

times
Firmware update completed| Blinks twice
Factory Reset| 5% brightness blinks quickly 5 times.

Note:

• After Factory Reset, All connection data will be cleared. The Smart Desk Lamp must be removed from the app and then add it back again.
• If you set the brightness to 0% before turning off the light switch, the smart Desk Lamp will resume to 100% brightness as soon as you turn on the light switch again to indicate that it is in good shape.

What‘s Included

• DL2202 Smart Desk Lamp
• AC/DC Adapter
• User Manual

System Requirements

• Mobile device running the latest version of iOS and Android 4.3 or above
• Existing Wi-Fi network (2.4GHz)
• Stable Internet with good signal strength

Specifications

• Input: 12V,2A
• Power: 24W Max
• Wireless charging power: 10W
• Brightness: 600Lm
• Average beam angle: 100°
• Expected LED life: 25000H
• Working temperature: 0~40℃
• Color temperature: 2700K – 6500K (including 2700K, 3600K,4600K, 5500K, 6500K) Wi-Fi 2.4GHz b/g/n IEEE802.11
• Operation frequency band(s): 2412~2462MHz

Application

FCC Declaration

Caution:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Safety Warnings

• WARNING: RISK OF ELECTRIC SHOCK OR BURNS. DO NOT install this product with wet hands or standing on wet or damp surfaces
• Not suitable for use with standard in-wall dimmers. Dimmable via the app or Touch bar.
• Place on a flat or secure surface.
• Only use the supplied AC Power Adapter
• Keep the Lamp dry and clean
• NOT FOR EMERGENCY LIGHTING
• DO NOT disassemble
• DO NOT clean with liquid
• Avoid any extreme heat sources or direct sunlight.
• Suitable for use in an operating environment between 0°C and 40°C (32°F and 104°F)

ISED Statement

This device complies with Part 15 of the FCC Rules [and contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS standard(s)]. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The digital apparatus complies with Canadian CAN ICES-3 (B/NMB-3(B).

References

• VOCOlinc, a smart home devices brand.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>