vocolinc LB2202 ColorFlux Light Bulb Ampoule ColorFlux User Manual
- June 4, 2024
- vocolinc
Table of Contents
vocolinc LB2202 ColorFlux Light Bulb Ampoule ColorFlux
Product Overview
ColorFlux Light Bulb LB2202 BR30 Light Bulb is a tunable white, multi-color LED Light Bulb that can be controlled wirelessly via iOS or Android smartphones and tablets, no hub required. You can customize your personal lighting using the VOCOlinc app from anywhere with an active internet connection.
Specifications+
Input : AC120V, 60Hz
Base type : E26
Rated power : 9.5W
LED color range : 16 million colors with cool to warm whites
Luminous flux : 800 lumens
Beam angle : 100 degrees
Expected LED life : 22.8 years (25000 hours)
Operation frequency band (s): 2412~2462MHz for E26
Max. transmitted RF power : 12±1dBm.
Color temperature: 2200K – 7000K (including 2200K, 2500K, 2700K, 3000K,
3500K, 4000K, 5000K, 5700K, 6500K, 7000K)
What’s Included
- LB2202 Smart Wi-Fi BR30 Light Bulb
- User Manual
Features
- 16 million colors
- Works with Apple HomeKit
- Works with Amazon Alexa
- Works with the Google Assistant
- Remote Access
Status | LB2202 |
---|---|
Turning on the first time | Searching Wi-Fi |
Pairing | White light at 5% brightness |
Device added successfully | White light at 50% brightness |
Identifying the light bulb | White light at 5% brightness quickly blinks 5 |
times
Firmware update completed| Blinks twice
| |
- If you set the brightness to 0% before turning off the light switch, the smart light bulb will resume to 5% brightness as soon as you turn on the light switch again to indicate that it is in good shape.
Factory Resetting
Resetting the smart light bulb can help you troubleshoot any issues you may have. To reset it to factory defaults:
- Turn the light switch controlling the bulb to the OFF position.
- Flip the light switch on and off 3 times. Time lag between each cycle must not exceed 5 seconds.
The Smart light bulb will blink three times once reset is completed.
Note: all connection data will be cleared. ColorFlux Light Bulb LB2202
must be removed from the app and then added back again.
System Requirements
- Mobile device running iOS latest system or Android OS4.3+
- Existing Wi-Fi network
- Stable Internet with good signal strength
Safety Warnings
- WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it
- DO NOT install the Smart Wi-Fi LED Bulb with wet hands or when standing on wet or damp surfaces.
- Not suitable for use with standard in-wall dimmers. Dimmable via the app only Suitable for use in operating environment between 0°C and 40°C.
- This device is not intended for use with emergency exit luminaires.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
- NOT FOR EMERGENCY LIGHTING
- For indoor use only
- DO NOT disassemble
- DO NOT clean with liquid
- Use in Dry Locations only
- Only use the control provided with or specified by these instructions to control this lamp.
- This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
FCC Declaration
Caution:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>