ARROW PB-10000-850 Pressure Injectable One Lumen PICC Instructions

ARROW PB-10000-850 Pressure Injectable One Lumen PICC

Product Information

Specifications

• Model: PB-10000-850
• Size: 8.5 X 10.5
• EU Number: EU-05541-HPMSB (IPNXXXXXX)
• Catheter Length: 55 cm
• Guide Diameter: .018 inch
• Number of Lumens: One
• Usage: Pressure Injectable PICC

Product Usage Instructions

Precautions

Before using the product, ensure there are no contraindications such as device-related infections or thrombosis in the insertion vessel or catheter pathway. Conduct a clinical assessment of the patient to confirm suitability.

Components

• GlideThruTM Peel-Away Sheath: 4 Fr. x 2-3/4 (7 cm) Radiopaque over 4 Fr. Dilator
• Spring-Wire Guide: .018 (0.46 mm) dia. x 13-1/8 (33 cm) (Straight Soft Tip on Both Ends)
• Catheter: 22 Ga. x 1-3/4 (4.45 cm) Radiopaque over 25 Ga. RW Introducer Needle

Usage Guidelines

1. Prepare the insertion site according to medical protocols.
2. Insert the catheter following standard procedures.
3. Use the spring-wire guide to assist in catheter placement.
4. Ensure proper priming volume and flow rates based on requirements.
5. Monitor the patient during and after catheter insertion for any adverse reactions.

FAQ

Q: What are the priming volume and flow rate specifications for the product?

A: The priming volume is approximately 0.48 mL, with a gravity flow rate of 436 mL/hr and a pump flow rate of 4075 mL/hr. The maximum pressure injection flow rate is 4 mL/sec.

Q: Are there any contraindications for using the Pressure Injectable PICC?

A: Yes, contraindications include device-related infections or thrombosis in the insertion vessel or catheter pathway. A clinical assessment of the patient is necessary to rule out contraindications.

Contents

• 1: One Lumen Catheter: 4 Fr. (1.45 mm OD) x 55 cm, Pressure Injectable, T-Port Connector, Blue FlexTip®, Contamination Guard and Placement Wire
• 1: GlideThru™ Peel-Away Sheath: 4 Fr. x 2-3/4″ (7 cm) Radiopaque over 4 Fr. Dilator
• 1: Spring-Wire Guide: .018″ (0.46 mm) dia. x 13-1/8″ (33 cm) (Straight Soft Tip on Both Ends
• 1: Catheter: 22 Ga. x 1-3/4″ (4.45 cm) Radiopaque over 25 Ga. RW Introducer Needle
• 1: Introducer Needle: 21 Ga. x 1-1/2″ (3.81 cm) TW
• 1: Injection Needle: Eclipse ™1 23 Ga. x 1-1/2″ (3.81 cm)
• 1: Introducer Needle: Echogenic 21 Ga. x 2-3/4″ (7 cm) TW
• 1: Filter Needle: 18 Ga. TW x 1-1/2″ (3.81 cm) with Blunt Fill Tip
• 1: Injection Needle: Eclipse ™1 25 Ga. x 1″ (2.54 cm) and 3 mL Luer-Lock Syringe
• 1: Syringe: 10 mL Luer-Lock
• 1: Syringe: 10 mL Luer-Slip
• 1: Dust Cap: Non-Vented
• 1: SecondSite ™ Adjustable Hub: Catheter Clamp
• 1: SecondSite ™ Adjustable Hub: Fastener
• 1: SharpsAway® Il Locking Disposal Cup
• 1: SharpsAway® Disposal Cup
• 1: Catheter Trimmer
• 1:1 Towel: 24″ x 36″ (61 cm x 91 cm)
• 1: Maximal Barrier Drape ™ with two 13 cm (5″) x 15 cm (6″) fenestrations
• 1: Towel
• 1: Safety Scalpel: #11
• 1: Patient ID Card
• 1: Sterile Procedure Sign
• 1: Patient Information Booklet
• 1: Chart Sticker
• 1: PICC Line Insertion Checklist
• 2: Paper Tape Measure
• 1: Tourniquet
• 5: Gauze Pad: 2″ x 2″ (5 cm x 5 cm)
• 10: Gauze Pad: 4″ x 4″ (10 cm x 10 cm)
• 1: Surgical Apparel : Impervious Gown
• 1: Dressing: I.V. Advanced 8.5 cm x 11.5 cm
• 1: Surgical Apparel : Bouffant Cap
• 1: Surgical Apparel : Mask with Eye Shield
• 1: Dressing: STATLOCK®2 PICC Plus Catheter Stabilization Device
• 1: Surgical Apparel : Mask
• 1: Tape: Steri-Strip®3
• 1: HemoHopper® Fluid Receptacle

1. A trademark of Becton, Dickinson and Company.
2. A registered trademark of C. R. Bard, Inc.
3. A registered trademark of 3M Company.

Specifications

• Priming volumes are approximate and are done without accessories.
• + Flow rate values are approximate and are determined using deionized water at 100 cm head height.
• + Pump flow rates are determined at maximum pump pressure of 10 psig and represent approximate flow capabilities.
• Pressure injection flow rates are determined at the injector pressure setting of 300 psi maximum using media of 11.8 centipoise viscosity, with 152 cm pressure tubing.

Not made with natural rubber latex

• Contraindications: The Pressure Injectable PICC is contraindicated wherever there is presence of device related infections or presence of thrombosis in the intended insertion vessel or catheter pathway.
• Clinical assessment of the patient must be completed to ensure no contraindications exist.
• All components are CE 2797 unless otherwise noted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>