vocolinc DL2201 Smart Desk Lamp User Manual
- June 4, 2024
- vocolinc
Table of Contents
vocolinc DL2201 Smart Desk Lamp
Product Overview
Handsfree voice control and with cool to warm whites, the DL2201 Smart Desk Lamp is here to make your home truly yours.Utilizing the latest in Wi-Fi technology, DL2201 Smart Desk Lamp enables you to set the color temperature and intensity of any area via VOCOlinc app. With countless uses and applications, an all-new world awaits you with the VOCOlinc DL2201. You can customize your personal lighting from anywhere with an active internet connection.
Touch Button
| 1 | Power Button | Short tap to turn on/off Hold for 10s to reset |
|---|---|---|
| 2 | Brightness min | Slide the Touch Bar to adjust the light brightness you |
prefer(5 Levels).
From left to right, Brighten the light From right to left, Dim the light
3| Brightness max
4| Mode Button| Tap to change color temperature
5| Status LED| Smart Desk Lamp Status
DL2201 Smart Desk Lamp Status
| Status | DL2201 |
|---|---|
| Turning on the first time | Searching Wi-Fi |
| Pairing | White light at 5% brightness |
| Device added successfully | White light at 50% brightness |
| Identifying the Smart Desk Lamp | White light at 5% brightness blinks quickly 3 |
times
Firmware update completed| Blinks twice
Factory Reset| 5% brightness blinks quickly 5 times.
Note:
- After Factory Reset , All connection data will be cleared . The Smart Desk Lamp must be removed from the app and then add it back again.
- If you set the brightness to 0% before turning off the light switch, the smart Desk Lamp will resume to 100% brightness as soon as you turn on the light switch again to indicate that it is in good shape.
What‘s lncluded
- DL2201 Smart Desk Lamp
- AC/DC Adapter
- User Manual
System Requirements
- Mobile device running the latest version of iOS and Android 4.3 or above
- Existing Wi-Fi network (2.4GHz)
- Stable Internet with good signal strength
Specifications
- Input: 12V,1A
- Power: 12W Max
- Brightness:600Lm
- Average beam angle: 100°
- Expected LED life: 25000H
- Working temperature: 0~40℃
- Color temperature: 2700K – 6500K (including 2700K, 3600K,4600K, 5500K, 6500K)
- Wi-Fi 2.4GHz b/g/n IEEE802.11
- Operation frequency band(s): 2412~2462MHz
Safety Warnings
- WARNING: RISK OF ELECTRIC SHOCK OR BURNS. DO NOT install this product with wet hands or standing on wet or damp surfaces Not suitable for use with standard in-wall dimmers.
- Dimmable via the app or Touch bar.
- Place on flat or secure surface.
- Only use the supplied AC Power Adapter
- Keep the Lamp dry and clean
- NOT FOR EMERGENCY LIGHTING
- DO NOT disassemble
- DO NOT clean with liquid
- Avoid any extreme heat sources or direct sunlight. Suitable for use in operating environment between 0°C and 40°C (32°F and 104°F)
FCC Declaration
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible operate the equipment.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.
EU declaration of conformity
Hereby, Felion Technologies Company Limited declares that the radio
equipment Smart Desk Lamp is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.vocolinc.com