vocolinc LS2202 ColorFlux Light 10 Meters 2×16.4ft Strip User Manual
- June 3, 2024
- vocolinc
Table of Contents
vocolinc LS2202 ColorFlux Light 10 Meters 2×16.4ft Strip
Product Overview
With hands-free voice control and with over 16 million colors, the LS2202
ColorFlux Light Strip is here to make your home truly yours. Utilizing the
latest in Wi-Fi technology, LS2202 ColorFlux Light Strip enables you to set
the color temperature and intensity of any area via the VOCOlinc app. With
countless uses and applications, an all-new colorful world awaits you with the
VOCOlinc LS2202.
You can customize your personal lighting from anywhere with an active internet
connection. It also supports for segment control and you can set it to a
variety of effective mode in different segments of it . With VOCOlinc APP, the
strip light syncs to music and sound. Colorful lights change colors and flash
speed with rhythm and melody so that it’s ideal for party, bedrooms, stairs,
cupboards, and desk decorations.
What’s Included:
- LS2202 ColorFlux Light Strip
- Smart Wi-Fi Controller
- AC/DC Adapter
- User Manual
Features
- 16 million colors
- Works with Apple HomeKit
- Works with Amazon Alexa
- Works with the Google Assistant
- Remote Access
Power / Reset Button:
- Quick press to switch on/off
- Press & hold for about 10 seconds to FACTORY RESET.
Note: All connection data will be cleared after reset. The LS2202 ColorFlux Light Strip must be removed from the app and then add it back again.
LS2202 ColorFlux Light Strip Status
*If you set the brightness to 0% before turning off the light switch, the smart light strip will resume to 100% brightness as soon as you turn on the light switch again to indicate that it is in good shape.
System Requirements
- Mobile device running the latest version of iOS and Android 4.3 or above
- Existing Wi-Fi network
- Stable Internet with good signal strength
Installation Steps
-
Choose a dry, clean and smooth wall or another surface
-
Wipe off the dust
-
Warm the tape with a hair dryer when it’s below 10℃/50℉
-
Strip off the protective film;
( Notice: Do not peel off the tape under the film.) -
Stick the strip light and press over it about 10~15s
-
For corner setup, bend the strip and reinforce via clips; (Notice: Avoid bending on LED beads.)
-
Reinforce via clips and screws provided.
Specifications
- Input: 100-240VAC, 50/60Hz
- Output: 24V 1.5A ( SELV )
- Plug type: US/EU
- LED color range: 16 million colors with cool to warm whites
- Wattage: 36W max
- Operation frequency band(s): 2412~2472MHz
- Max. transmitted RF power: 17dBm
Safety Warnings
- WARNING: RISK OF ELECTRIC SHOCK OR BURNS. DO NOT install this product with wet hands or standing on wet or damp surfaces
- Not suitable for use with standard in-wall dimmers. Dimmable via the app only
- Suitable for use in an operating environment between 0°C and 40°C (32°F and 104°F)
- The adapter, controller and light strips must be used in conjunction with full set of LS2202 ColorFlux Light Strip
- Please do not mix with another model of products, otherwise, there is a risk of product damage
- This device is not intended for use with emergency exit luminaires
- NOT FOR EMERGENCY LIGHTING
- DO NOT disassemble
- DO NOT clean with liquid
FCC Declaration
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Declaration
Caution: This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to ithe following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. In order to avoid the possibility of exceeding the ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
EU declaration of conformity
Hereby, Felion Technologies Company Limited declares that the radio equipment ColorFlux Light Strip is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.vocolinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>