vocolinc L4 A21 LED Bulb User Guide
- June 6, 2024
- vocolinc
Table of Contents
vocolinc L4 A21 LED Bulb
Product Overview
ColorFlux Light Bulb L4 A21 Light Bulb is a tunable white, multi-color LED Light Bulb that can be controlled wirelessly via iOS or Android smartphones and tablets, no hub required. You can customize your personal lighting using the VOCOlinc app from anywhere with an active internet connection.
Specifications
Input: | AC120V, 60Hz |
---|---|
Base type | E26 |
Rated power | 9.5W |
LED color range | 16 million colors with cool to warm whites |
Color temperature | 2200K – 7000 (including 2200K, 2500K, 2700K, 3000K, 3500K, |
4000K, 5000K, 5700K, 6500K, 7000K)
Luminous flux| 850 lumens
Beam angle| : 220 degrees
Expected LED life| 22.8 years (25000 hours)
Operation frequency band(s)| 2412~2462MHz for E26
Max. transmitted RF power| 12±1dBm
What’s Included
- L4 Smart Wi-Fi A21 Light Bulb
- User Manual
Features:
- 16 million colors
- Works with Apple HomeKit
- Works with Amazon Alexa
- Works with the Google Assistant
- Remote Access
L4 ColorFlux Light Bulb LED status
Status
|
L4
---|---
Turning on the first time| Searching Wi-Fi| White light at 5% brightness
Pairing| White light at 5% brightness
Device added successfully| White light at 50% brightness
Identifying the light bulb| White light at 5% brightness quickly blinks 5
times
Firmware update completed| Blinks twice
- If you set the brightness to 0% before turning off the light switch, the smart light bulb will resume to 5% brightness as soon as you turn on the light switch again to indicate that it is in good shape.
Factory Resetting
Resetting the smart light bulb can help you troubleshoot any issues you may have. To reset it to factory defaults:
- Turn the light switch controlling the bulb to the OFF position.
- Flip the light switch on and off 3 times. Time lag between each cycle must not exceed 5 seconds.
The Smart light bulb will blink three times once reset is completed.
Note: all connection data will be cleared. ColorFlux Light Bulb L4 must be
removed from the app and then added back again.
System Requirements
- Mobile device running iOS latest system+ or Android OS4.3+
- Existing Wi-Fi network
- Stable Internet with good signal strength
Safety Warnings
- WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it
- DO NOT install the Smart Wi-Fi LED Bulb with wet hands or when standing on wet or damp surfaces
- Not suitable for use with standard in-wall dimmers. Dimmable via the app only
- Suitable for use in operating environment between 0°C and 40°C
- This device is not intended for use with emergency exit luminaires
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
- NOT FOR EMERGENCY LIGHTING For indoor use only
- DO NOT disassemble
- DO NOT clean with liquid
- Use in Dry Locations only
- Only use the control provided with or specified by these instructions to control this lamp.
- This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control
FCC Declaration
Caution
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
IC Declaration
Caution
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device
In order to avoid the possibility of exceeding the ISEDC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8
inches) during normal operation.
VOCOlinc APP
Setup code Code de configuration
Documents / Resources
|
vocolinc L4 A21 LED
Bulb
[pdf] User Guide
L4, 2AXT8-L4, 2AXT8L4, L4 A21 LED Bulb, L4 A21, LED Bulb
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>