munchkin B086P7QG8R Miracle 360 Degree Personalized Cup User Manual
- June 4, 2024
- munchkin
Table of Contents
munchkin B086P7QG8R Miracle 360 Degree Personalized Cup
INCLUDED PARTS
TO CLEAN
Note: Separate all parts, including the sealing rings, prior to washing.
- Unseat valve from collar by firmly lifting valve’s center tab. Then turn the collar COUNTER CLOCKWISE to unscrew from the cup.
- Turn the collar upside down, then carefully remove an upper sealing ring from the inside collar by lifting the pull tab.
- . Turn the inner cup CLOCKWISE to remove it from the outer cup.
- Then gently roll down the lower sealing ring to remove it from the inner cup.
Note: Always wash all parts before use. Rinse all components with warm
water immediately after each use. Wash all parts in mild soapy water or on the
top rack of a dishwasher. Always store unassembled to allow parts to dry
completely. Replace stickers at the first sign of damage or tear.
IMPORTANT INFORMATION
CAUTION: Wash and inspect before use. Top rack dishwasher safe. Do not boil or steam sterilize. Discard and replace at the first sign of damage. Discard all packaging components before use. To prevent burns, do not microwave the cup or use with hot liquids. Do not allow the child to play, bite or chew on the valve. Do not use with carbonated beverages or pulpy juices. Do not let the child walk or run while carrying a cup. Replace stickers at the first sign of damage or tear. Use the product with adult supervision.
TO ASSEMBLE
-
Insert upper sealing ring into the collar, then press securely against the bottom rim.
-
Place lower sealing ring around lower cup, then roll up until securely against lip. Be sure that sealing ring is above the thread ridge.
-
To personalize the cup with enclosed stickers: Parents can write the child’s name on indicated “name” sticker(s) with a permanent marker. A child can place stickers on the inner cup.
Note: Before use ensure stickers are secured onto the cup by an adult prior use. Replace stickers at first sign of damage or tear. Discard paper backing immediately after use. -
Insert inner cup into outer cup, then turn COUNTER CLOCKWISE until secure.
-
Place collar onto cup, then turn CLOCKWISE until secure.
-
Press valve’s center tab firmly onto collar until valve locks into place.
TO USE
- Remove collar and fill cup with water. Replace collar. Cup is not intended to be used without a colored inner cup.
- You can drink from any side of the cup. Simply tilt the cup toward you and suck on the valve’s edge. Do not bite or chew.
Address:
© 2022 MUNCHKIN, INC. 7835 GLORIA AVE., VAN NUYS, CA 91406. MUNCHKIN BABY CANADA LTD., 3-8460 MOUNT PLEASANT WAY, MILTON, ON L9T 8W7. MADE IN CHINA WWW.MUNCHKIN.COM/PATENTS. 17407-IS-1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>