ansult 019914 LED Strip Instruction Manual

June 4, 2024
ansult

ansult 019914 LED Strip Instruction Manual

SAFETY INSTRUCTIONS

  • Carefully read the instructions before use! Save these instructions for future reference.
  • Check that all connections are properly made before switching on the product.
  • If the product does not work, check that the circuit is supplied with voltage.
  • Keep children at a safe distance from the product when it is in use.
  • If the permitted maximum voltage is exceeded this can damage the product, or reduce its useful life.
  • If the permitted maximum temperature is exceeded this can damage the product, or reduce its useful life.

SYMBOLS

TECHNICAL DATA

Output 1.2 W
No. of LEDs 12
Colour temperature 3000 K
Luminous flux 90 Im
LED strip, size 400x 8×5 mm
Cord length 2000 mm
Operating temperature -20 to 40°C
Storage temperature -20 to 45°C

INSTALLATION

  1. Measure the distance between the ends of the light, and mark out and fit the fasteners with the self-tapping screws.

  2. Put the ends of the light in the fasteners.

  3. Connect the cord to the LED strip.

  4. Connect the power cord and switch on.

REMOVAL

  1. Remove the small cylinder on the transparent cover with a drill.

  2. Press out the circuit board.

  3. Test the light source by connecting to 12 VDC.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals