ansult 018229 Work Lamp LED Owner’s Manual

June 4, 2024
ansult

WORK LAMP LED Operating instructions
(Translation of the original instructions)

ansult 018229 Work Lamp LED

018229

018229 Work Lamp LED

Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

ansult 018229 Work Lamp LED - Fig 1

SAFETY INSTRUCTIONS

  • Do not use the product near flammable materials or gas.
  • The LEDs must not be covered during use.
  • Only use the supplied charger.
  • Keep this product out of the reach of children.
  • Always check the charger cord before use. Replace the charger if the cord is damaged.
  • Recycle used batteries in accordance with local regulations.
  • Never shine the light in the eyes of people or animals.

RISK GROUP 2
WARNING!
The product emits optic radiation that can result in a risk of personal injury. Do not look at the light source when it is switched on. Risk of eye damage.

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
| Do not look into the light source.
| Class Ill.

TECHNICAL DATA

Rechargeable lithium battery 3.7 V / 2500 mAh
Protection rating IP67
Output main spotlight COB LED 10 W
Output secondary spotlight LED 2 W
Luminous flux main spotlight approx. 800 Im
Luminous flux secondary spotlight approx. 160 Im
Ambient temperature —10 to 45°C
Run time main spotlight 2.5 to 12 h
Run time secondary spotlight Dimming function 12 h

10 to 100%
Charging time|  Approx. 3 h
Safety class|   III
 Charging| 5 V, 1000 mA

DESCRIPTION

  1. Car spotlight
  2. Main spotlight
  3. Power switch
  4. Dimmer button
  5. Battery indicator
  6. Charger connection micro USB
  7. Swivel magnetic mount 360°
  8. Heavy-duty pivoting metal hanger**FIG. 1**

USE

CHARGING

  1. Connect USB charger to the power supply.
  2. Connect charger cord to micro USB port.
  3. The battery charge status is shown on the battery indicator. When all 4 status lights go on the battery is fully charged.

NOTE:
Fully charge the batteries before using for the first time.

POWER SWITCH FUNCTION

First press The main spotlight COB LED goes on
Second press The secondary spotlight LED goes on
Third press Spotlights go off

If the switch is not touched for 3 seconds the next time it is pressed will switch it off.

DIMMING FUNCTION

Main spotlight COB LED 10 to 100%
Secondary spotlight LED 10 to 100%

MAINTENANCE

The product should be recharged every 3 months for the best battery life span.

JULA AB, BOX 363, SE-532 24 SKARA
© Jula AB 2022-08-25

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals