ansult 019718 Solar Cell LED Lighting Instruction Manual
- June 4, 2024
- ansult
Table of Contents
Item
no. 019718
SOLAR CELL LED LIGHTING
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com
SYMBOLS
| **** | Read the instructions. |
|---|---|
| **** | Approved in accordance with the relevant directives. |
| **** | Recycle discarded product in accordance with local regulations. |
TECHNICAL DATA
| Battery type (rechargeable) | AAA |
|---|---|
| Battery technique | NiMH |
| Battery voltage | 1.2 V |
| Battery capacity | 300 mAh |
| Light source | LED |
| Colour temperature | 3000 K |
| Colour tone | Warm white |
| Luminous flux | 3 lm |
| Output | 56 mW |
| Protection rating | IP44 |
| Size | H21 x Ø21.5 cm |
DESCRIPTION
Stylish lantern with solar cell panel and twilight sensor that switches on the lamp when it goes dark. The lamp has a hook so that it can be hung up in the patio or on the balcony. Runs on a rechargeable AAA battery (included).
- Solar cell panel
- Lamp shade
- Light source LED
- LED
FIG. 1
SOLAR CELL-POWERED LIGHT
-
The product runs on solar energy via the built-in solar panel.
-
The solar panel converts solar energy to electrical energy,
which is used to charge the rechargeable NiMH battery. -
The light switches on automatically when it goes dark and switches off in daylight. How long the light stays on depends on how long the solar panel has been exposed to sunlight.
– Long exposure to sunlight produces longer lighting up.
– For best functionality, place the product so that it is exposed to sunlight and is therefore charged for as long as possible.
– With maximum exposure to sunlight the light will shine for up to 8 hours.
USE
-
Carefully remove all the parts from the packaging.
-
Start the product with the power switch (1).
FIG. 2 -
Place the product in the required place.
NOTE:
- Keep sharp objects away from the surface of the solar panel to prevent scratching and damage.
- The functionality of the product can be checked by covering the top of the solar panel – the light should go on if the product has started.
- It is difficult to see the LED light in bright ambient light. The product works best in the dark. This does not mean that the product is not working.
- For best functionality, allow the product to charge for one day before using for the first time.
REPLACING THE BATTERY
Follow the instructions to replace the rechargeable AAA battery (NiMH).
FIG. 3
- Unscrew the screws on the bottom of the casing with a screwdriver and open the battery cover.
- Replace the battery with a new one of the same type (rechargeable AAA battery, 1.2 VDC, 300 mAh, NiMH).
- Replace the battery cover and firmly tighten the screws.
NOTE:
• Do not mix old and new batteries.
• Do not mix alkaline batteries with ordinary batteries or rechargeable batteries (NiCd, NiMH, etc.).
2021-12-17
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA
Documents / Resources
|
ansult 019718 Solar Cell LED
Lighting
[pdf] Instruction Manual
019718 Solar Cell LED Lighting, 019718, Solar Cell LED Lighting, LED Lighting
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>