geemarc SOS-PRO295 Cordless Big Button User Guide
- June 4, 2024
- geemarc
Table of Contents
SOS-PRO295
USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up-to-date user
guide, as there may be important updates and changes you need to be aware of
!!!
CAUTION: Use only the battery provided. There may be a risk of explosion
if a wrong type of battery is used for the parent unit. The battery cannot be
subjected to high or low extreme temperature and low air pressure at high
altitude during use, storage or transportation. Disposal of battery into fire
or a hot oven, or mechanically crushing or cutting or the battery can result
in an explosion. Leaving the battery in an extremely high temperature
surrounding environment can result in an explosion or the leakage of flammable
liquid of gas. Battery subjected to extremely low air pressure may result in
an explosion or the leakage of flammable liquid or gas. Dispose of used
battery according to the instructions. Normal operating temperature for the
product (e.g. 0 oC ~ 40oC). Use only the adapters and battery listed below.
Power adapter information: Parent unit and baby unit output: 5V DC 1A. Vtech
Telecommunications Limited Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Li-ion Battery: Model: GSP042535 3.7V, 320mAh, 1.184 Wh.
Guangzhou Great Power Energy & Technology CO., Ltd
Alarm Pendant
Connection
Charger: Connect the power adaptor of the pendant in main power.
PACKAGE CONTENTS
1 cordless pendant SOS-PRO295,
1 pendant charger,
1 lanyard with breakout clip,
1 user guide.
ALARM PENDANT
-
SOS: In idle mode, press to enter the emergency calling sequence set on your handset.
In call mode: press and hold for 2 seconds to stop the emergency call. -
During a call: increase or increase the receiving volume level, during ringing: increase or decrease the ringer level.
Press and hold for 2 sec to do a flash ® to answer a second incoming call ringing. -
M1 dial the direct memory 1
-
M2 dial the direct memory 2
-
RESET
-
Microphone
-
Led indicator
(Purple)
• Steady On: Un-register.
• Slow Flash: registered but the base is not available. Searching or out of range.
(Blue)
• Steady On: Seated in the base and fully charged.
• Steady on 3s and emit a long beep: Successfully registered.
• Double flashing: Off hook.
• Double flashing and on for 2s when just off hook: Off hook but the signal is weak. Hear 3 rapid beeps in every 10s.
• Short flashing: idle mode and off the charger, the pendant is in Standby mode.
• Long flashing: idle mode and off the charger. Continuously flashing: ringing and can be heard.
(Red)
• In continue on the charger: The pendant charges.
• Long flashing: The battery is low in using and we hear a short double beeps.
(Red/Bleu)
• Pairing mode after to hold and press the leys Vol(+) and Vol(-) during 10sec. -
LOUDSPEAKER
-
CHARGER CONTACTS
Registration the Alarm pendant
On Base: press and hold /HANDSET LOCATOR on the base to enter the registration
mode until to hear a beep. On Alarm pendant: Press and hold VOL+ together with
Voluntil the LED on pendant toggling between red and blue. Place the pendant
unit close to the charger.
A long beep tone is generated and the LED is blue for a while if the
registration is a success.
USE YOUR PENDANT
SOS Emergency calls
SOS Settings in handset
You need to set the SOS numbers in AMPLIDECT295SOS-PRO before you can make SOS
emergency calls using the pendant. Using the handset:
Press LEFT SOFTKEY and to select SOS SETTINGS.
Press LEFT SOFTKEY to show SOS NUMBER.
Press LEFT SOFTKEY and or SOS4)
Press LEFT SOFTKEY the number stored already. and enter a new number or edit
Press LEFT SOFTKEY to delete to confirm or RIGHT SOFTKEY
Press to come back in stand- by mode.
Make SOS Emergency Calls
Using the pendant:
Press SOS key on the pendant to enter the emergency calling sequence from the
SOS 1 number to SOS 4 number (cycling 3 times). A call will be first dialed to
the SOS 1 number. If the SOS 1 number does not answer in 60 seconds, the call
be will made to the SOS 2 number, and so on.
Note: The other party when receiving SOS message, has to validate the call
by pressing any keys. Then very 2mn need new validation to continue the
conversation.
Direct Memory Keys
You can store direct memory numbers (M1 and M2) in the handset. Then, you can
dial them directly from idle mode using the pendant.
Set Direct Memory Keys in Handset
Press LEFT SOFTKEY and ▼/▲ to select DIRECT MEM.
Press LEFT SOFTKEY and ▼/▲ to select the memory key to edit (M1 or M2).
Press LEFT SOFTKEY and enter a new number or edit the number stored already.
Press LEFT SOFTKEY to confirm.
Press to come back in stand-by mode.
Make Calls using Direct Memory Keys
Using the pendant:
Press M1 or M2 to dial the direct memory number stored.
GUARANTEE
From the moment your Geemarc SOS-PRO295 is purchased, Geemarc guarantee it for
the period of two years. During this time, all repairs or replacements (at our
discretion) are free of charge. Should you experience a problem then contact
our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any parts.
The product must not be tampered with or taken apart by anyone who is not an
authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED
AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this SOS-PRO295 is in compliance with
the essential requirements and other relevant provisions of the Radio
Equipment Directive 2014/53/UE.
The UKCA declaration of conformity may be consulted at www.geemarc.com
RF Parameter
Frequency Range:| 1881.792-1897.344 MHz
RF power:| < 250mW
Power Supply
Charger| Model: VT05EUK06045
Input 100-240V 50/60Hz;
Output DC 6V 0.45A, 2.7W Energy efficiency : 73.67%(Min) Non load power :
0.1W(Max)
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in place for
the products at the end of their useful life are recycled in the best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate WEEE skip. Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they should accept it.
Thus if you respect these instructions you ensure human health and environmental protection.
For product support and help visit our website at
ww.geemarc.com
E-mail : [email protected]
Telephone : 01707 387602
lines are open 09h00 to 16h00 Mon to Fri 2 Rue Galilée, Parc de l’Etoile,
59791 Grande-Synthe, Cedex
France.
Manufacturer: Vtech (Dongguan) Telecommunications Limited. Vtech Science Park,
Xia Ling Bei Management Zone, Liaobu, Dongguan,
Guangdong.
This product is made in China To Geemarc Telecom
QUGSOS-PRO295_En_halfA3_V1.6