TRYSIGHT Mag1 Magnibot Distance Camera User Guide

: June 17, 2024
: TRYSIGHT

Table of Contents

Introduction to Magnibot
What’s Included
Using Magnibot
Connecting to Magnibot
Menu Bar
Toggle Color
Capture an image
Toggle Near/Far (Only available when placed on stand)
Settings
Settings Menu
Camera Options
Moving Magnibot
Connect to Internet
Warranty Conditions
Technical Specifications
Contact Us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**TRYSIGHT Mag1 Magnibot Distance Camera User Guide

**

Introduction to Magnibot

Congratulations on purchasing your Magnibot! This motorized wireless robotic camera is designed to assist those with low vision in capturing and viewing images.

Before using your Magnibot, please make sure that it is fully charged. To charge the device, connect the included USB cable to the Magnibot and plug the other end into a power source. Charging time will vary depending on the amount of power remaining in the device, but it typically takes about 2 hours for a full charge.

What’s Included

Camera
Wireless Antenna
Charger with USB C Cable
Magnibot Stand (optional)
User Manual

Using Magnibot

TURNING ON/OFF

To turn on the Magnibot, press the power button for 1 second. A red light will appear in the front of the device indicating the unit is turned on.
To turn off the unit, press the power button for 3 seconds.
While charging, the indicator will show a blinking green light. The number of green bars (Maximum of 4) indicate battery charge level.

Connecting to Magnibot

To connect to the camera, disconnect from your existing WiFi network, then choose the WiFi network “magnibot” and connect.
Check Connect automatically (On Windows)
Note the external wireless antenna is not required to connect to the Magnibot
Ensure “Connect automatically” is unchecked from any other available networks on your machine. Leaving this checked will cause your machine to disconnect from the magnibot and connect to another network without your knowledge.
Once, connected, open a web browser and go to URL 192.168.4.1
Video from the camera will appear in the browser with an arrow as shown below
Clicking this arrow displays a Menu Bar with various features on the Magnibot.

| Tab Up to hide the menu
---|---
| Battery Level Indicator
| Rotate Camera Up
| Rotate Camera Down
| Rotate Camera to the Left
| Rotate Camera to the Right
| Zoom In
| Zoom Out
|

Toggle Color

---|---
|

Capture an image

|

Toggle Near/Far (Only available when placed on stand)

|

Settings

To open the settings menu, click the settings icon

Color Modes

Color Options to cycle through.

Frequency

Camera Refresh Frequency.

Motor Movement

Camera Movement Speed (slow/fast)

Other Settings

| Click to reset to Default Brightness
---|---
| Click to reset to Default Contrast
| Increase Brightness/Contrast
| Decrease Brightness/Contrast
| Format Efficient/Fast
| Adjust resolution 720p/1080p
| Connect to a Wifi Network via the Magnibot (Camera will reboot after 1−2 min)

Camera Options

|

Pause/Play Video

---|---
|

Capture an image (autosave to your downloads folder)

|

Record video (autosave to your downloads folder)

Moving Magnibot

Use the arrows or drag with touch/mouse. The further you pull the arrow, the faster it’ll move the camera.

To move the camera, use touch or mouse gestures depending on the device. Click/Touch anywhere near the middle of the screen and drag sideways or up/down to move the camera in the respective direction. Moving in an unclear direction such as at a 45 degree angle will display a red circle indicating Magnibot isn’t sure where to move.

Increasing the drag amount will make Magnibot move faster and vice versa.

|

No movement

---|---
|

Small Movements for Up/Down/Left/Right

|

Large Movements Up/Down/Left/Right

Connect to Internet

To connect to the internet while using the Magnibot, insert the Wireless Antenna into the USB port at the back of the device as shown below.

Reboot the device after inserting the antenna to enable internet connectivity.
Open the Magnibot Menu, click the Settings Icon and then the Wifi Icon to see the list of available Wifi Networks. Click the Wifi
network to connect to and enter the Wifi password and click “Connect”.

BELLB21
BELL270
TP-LINK Smart Plug 1800
BELL 178
Stepcon Airport
****Acanac 05374
BELLZ70

Note: Use the “Advanced” button to enter optional login credentials for your Wifi network.

The Magnibot can be inserted into an optional aluminum stand for near viewing. Open the stand to the vertical position as shown below.

Insert the magnibot into the stand using the slit at the bottom of the Magnibot. Once the Magnibot is in the stand, an icon will appear in the menu to toggle between near and far viewing

Clicking the toggle icon moves the Magnibot between near and far viewing. Please allow a few seconds for the device to complete this step after clicking the button.

The Magnibot will remember your preferred color and zoom settings for both near and far viewing and will automatically switch between the two depending on the device orientation.

Warranty Conditions

TrySight’s Magnibot warranty is free of defect in material, software and hardware for one (1) year from purchase date. This warranty extendsonly to the original purchaser and is not transferrable.

For any manufacturer’s warranty claim/s, contact TrySight or your authorized nearest distributor. Product’s serial number may be asked.

Disclaimer: TrySight takes no responsibility for use of this product other than described in this user manual.

Technical Specifications

Camera Dimensions: 6” (L) x 4.5” (W) x 8” (H)
Camera Weight: 0.722kg/1.59lbs
Stand Dimensions : 14” (L) x 8” (W) x 13.5” (H)
Stand Weight: 0.855kg/1.88lbs