Uniwins S6 True Wireless Stereo User Manual
- June 15, 2024
- Uniwins
Table of Contents
**Uniwins S6 True Wireless Stereo User Manual
**
The user guide:
Thanks for choosing this TWS. In order to make better use, pls read this manual carefully before using it and keep it properly.
- S6 True wireless bluetooth 5.4, binaural HD calls
- According to the principle of ergonomics, it fits the cochlea and it is comfortable to wear, it is not easy to fall off even when moving
The specification for headset:
Battery capacity: 35mAh/3.5V
Duration of music playback: 3.5-4.5h
Call duration in both ears: 3.5-4.5h
Charging time: 1.5h
Product weight: 41g
The specification for charging box
Battery capacity: 160 mAh/3.5V
Charging time: 1.5h
Life time: 6h (charge headset 1.3 times)
Product size: 57mm3637mm
Operation
| Item | Operation | LED indicator |
|---|---|---|
| Power on | Take out the headsets from the charging case or Press and hold for 3 | |
| seconds to power on | RED and BLUE lights flash alternately | |
| Power off | Take the headsets back to charging case | RED LED light on |
| Pairing | After take out from the charging box, it will be in pairing | |
| automatically | RED and BLUE LED flashes alternately for main headset, White |
LED of deputy headset flashes once every 5 seconds
Connection| Choose the bluetooth name SO3E| BLUE LED light off
Disconnection| Disconnect between phone and headsets, it will be in pairing
mode| RED and BLUE LED flashes alternately for main headset, White LED
ofdeputy headset flashesonce every 5 seconds
Re-connection| The headsets paire automatically| /
Turn off automatically if no connection| If no connection in 5mins, it will
turn off automatically| LED light off
Charging| Take the headsets back to charging
case and start charging| RED LED light on
---|---|---
Finish charging| The headsets in the charging case| RED LED light off
Lower power
alarm| Voice alarm occurs when power
is below 3.3V| DeVry RED LE 3 slashes unseconds, and light off when 3.0V
Clear pairing| Press and hold for 8 seconds to delete pairing information and
shut down automatically| LED light off
Wearing overview:
Frequently Asked Questions
Bad sound quality
- Please confirm if the earphones are correctly worn.
- Please try to change a player or music playing application.
No sound or sound change
- Please confirm if the current device supports this product.
- Please try to change a player or music playing application.
Maintenance And Storage
It is important to keep the headsets clean for safe and healthful use.
- Do not wear the headsets that are dirty.
- When the headsets are out of use, please always store it in the clean dry environment provided.
- Do not store it with other articles, as it may cause pollution.
- Avoid storing it in the environment that is too hot or too cold.
- Avoid contact with liquid, and avoid extreme temperature or high humidity environment.
- Do not dismantle the earbud in an unprofessional and nonstandard manner, to avoid partial sound of the earbud.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that macaques undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.