LINDY 42702 200m Fibre Optic USB 2.0 Extender User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 42702 200m Fibre Optic USB 2.0 Extender
Safety Instructions
WARNING !
Please read the following safety information carefully and always keep this
document with the product. Failure to follow these precautions can result in
serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death. This device is a switching type power supply and
can work with supply voltages in the range 100 – 240 VAC For worldwide
usability four different AC adapters are enclosed: Euro type, UK type,
US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter
as shown in the picture and ensure it is firmly secured in place and does not
detach by pulling before installing into a power socket. To reduce risk of
fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing the 200m USB 2.0 Fibre Optic Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This Extender allows you to extend the distance between your host computer and a USB device by up to 200m. It consists of a local unit with a USB Type A and a LC Simplex Multimode connector – and a remote unit with a USB Type A and a LC Simplex Multimode connector. LC Multimode Fibre Optic cable up to 200m length is used to connect the two units (not included).
Package Contents
- LINDY USB 2.0 Fibre Optic Extender – Transmitter and Receiver
- Multi-Country Power Supply 5V 3A
- This manual
Features
- Extends USB connection up to maximum of 200m using a Multimode fibre optic cable (Simplex LC 50/125 μm)
- Supports all USB 2.0/1.1 devices up to 480Mbps
- Number of devices can be increased by using an additional USB hub
- 3.5/1.35mm DC socket for power supply
- True plug and play, no drivers required
- Supports all major operating systems with USB support
Specification
- Transmitter Input : USB Type A (Male)
- Transmitter Output : LC Simplex (Female)
- Receiver Input : LC Simplex (Female)
- Receiver Output : USB Type A (Female)
- Dimensions WxDxH: 33x80x13mm (1.3×3.15×0.51in)
- Housing Material : Metal
- Net Weight : 0.192kg (0.42lb)
- Operating Temperature : 0°C – 70°C (32°F – 158°F)
- Storage Temperature : -20°C – 75°C (-4°F – 167°F)
- Humidity : 0 – 85% RH (non-condensing)
Installation
Plug the USB Type A connector of the Transmitter into your host computer. Then connect your USB device to the USB A female port of the Receiver and connect Transmitter and Receiver by use of a Multimode fibre optic cable (not included) with LC Simplex connectors. Finally plug the power supply into the Receive
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom In 2006 the European Union introduced regulations
(WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and
electronic equipment. Instead, these products must enter the recycling
process. Each individual EU member state, as well as the UK, has implemented
the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or
electronic products. More details can be obtained from your national WEEE
recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Manufacturer (UK)
LINDY Electronics Ltd Sadler Forster Way Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk T : +44 (0)1642 754000
No. 42702 3rd Edition, February 2022 lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>