Wuhan ZG28 Vision Enhancement Imager User Manual

Vision Enhancement Imager
User Manual
V1.0.0
Thank you for purchasing this product. Please read this Guide first and keep it properly for future reference. We hope this product will meet your expectations.

Important

This Guide is a general guide for a series of products, which means that the product you receive may differ from the description in the Guide. The actual product you receive shall prevail.
This Guide is prepared to introduce our products to the users.
We will try our best to ensure the accuracy of the Guide, but the completeness of the Guide still cannot be guaranteed, because our products have been continuously upgraded. We reserve the right to modify at any time without prior notice.
Applicant :Wuhan Guide Sensmart Tech Co., Ltd Manufacturer :Wuhan Guide Sensmart Tech Co., Ltd
Address :NO.29,Gaoxin 3rd Road,Donghu New-tech Development
Zone,Wuhan City, Hubei,P.R.China

IIIustrations

https://apps.apple.com/cn/app/targetir/id1579653456
https://play.google.com/store/apps/details?id=com.guide.targetir

Appearance (P1~P2)

power on/off
5| Up key| Short press: zoom in/toggle menu options
Long press: smoothly zoom in/ toggle menu options
6| Menu key| Short press: call out the shortcut menu/confirm to save the settings Long press: call out the main menu/do not save and exit the current menu
7| Down key| Short press: Toggle menu options/enable the laser ranging
Long press: Toggle menu options/disable the laser ranging
8| Camera key| Short press: take a picture
Long press: start recording/save the recording
9| Diopter regulation| Eyepiece diopter regulation
10| Battery holder| Hold battery
---|---|---
11| Wrist band| Press to slide
12| Triangular seat interface| 1/4 inch standard interface
13| Type-C port| Connect the PC to the external screen through a Type-C cable
14| MIC| Recording port

Battery installation (P1)

1. Press the battery compartment cover buckle and pull out the battery compartment cover;
2. Insert 2 batteries according to the positive and negative indications;
3. Push on the battery compartment cover;

Data transmission (P2)

1. Start the device to ensure it is in power-on state;
2. Connect the device to the PC via USB Type-C cable;
3. Access the data stored in the device from the PC;

Connection to mobile APP

1. Start the device to ensure it is in power-on state;
2. Turn on the WiFi hotspot on the device;
3. Search the WiFi hotspot name of the device through the mobile phone and connect;
4. Open the TargetIR APP on the mobile phone to get the real-time image of the device. Then you can control and access the device;

Charging/power supply

1. Charging mode
   The device is for power supply only, but cannot be charged.

2. Power supply mode
   Adapter and battery power supply is supported.
   Adapter power supply:
   The standard adapter of the product is used to connect the device for power supply. Open the USB cover and connect the adapter. The power supply icon as shown below can be seen in the lower left corner of the screen.

Battery power supply:
Power supply can be realized after the battery is installed according to the battery installation steps.
When the power level of battery changes, the power level indicator is displayed in the middle of the screen, with the illuminated part of the indicator showing the remaining power of battery.
After powering on and entering the real-time screen, the correct icon for the above power level of battery will be displayed in the lower left corner of the screen.
The power level is as follows:

High power level of external battery|
---|---
Medium-high power level of external battery|
Medium power level of external battery|
Medium-low power level of external battery|
Low power level of external battery|
Too low power level of external battery|

Note: The battery at low power level should be replaced in a timely manner!

Function description

• Power-on
  Long press the power button in the power-off state until a startup screen appears in the eyepiece, indicating that the device has been started successfully.

• Power-off
  Long press the power button in the power-on state to display the shutdown progress bar, until the progress bar is completed for successful shutdown.

• Display off
  Long press the power button under the power-on state to dispaly the shutdown progress bar. Before the progress bar is completed, releasing the power button can cancel the shutdown and enter the Display off mode.

• Display on
  In the Display off mode, triggering the device button can wake up the screen.

• Compensation
  Manual compensation: Short press the on/off button to complete the compensation action.
  Automatic compensation: The compensation operation is executed automatically according to the focal temperature.

• Exit menu
  When the device is turned on and the menu is displayed, short pressing the power button can enable the device return to the real-time interface without saving.
  Ranging: Short press the Down button to start ranging; For single ranging mode, a short press on the Down button can enable to measure the distance of the target, and a long press will disable the ranging function. The right zone displays the distance  value of the target and ranging mode.

Ranging mode: Single ranging and continuous ranging modes are available. In the single ranging mode, a short press on the Down button will proceed a ranging and update the distance value. In continuous ranging mode, automatic ranging will be performed once every second.
Angle: When this function is enabled, the right zone will display the pitching angle of the device, falling within [-90o, 90o]. Angle will not be displayed when the ranging function is disabled.
Vertical height: When this function is enabled, the right zone will display the vertical height of the target. Vertical height will not be displayed when the ranging function is disabled.
Image enlargement: the real-time image is electronically enlarged at the magnification of 1x, 2x, 4x and 8x by short pressing the Up button, and at the electronic magnification of 0.1x by long pressing the Up button.
Scenario mode: Three scenario modes can be set: natural/enhanced/highlighted.
Picture-in-picture (PIP): the PIP can be switched to Off, Top Left, Top Middle and Top Right positions. When the ranging function is disabled, the central part of the real-time picture is intercepted and displayed at 2x magnification. When the ranging  function is enabled, the surrounding part centered on the ranging cursor is intercepted and displayed at 2x magnification.
WiFi: The WiFi hotspots in two frequency bands, 2.4G or 5G, can be set up. After being connected through the mobile client and device, real-time images can be transmitted to the mobile APP, and the device can be operated through the mobile APP.
WiFi account: TJ-XXXX (XXXX represents the last four digits of the MAC address)
Password: 12345678
Hotspot tracking: When the device is turned on, the hotspot tracking cursor is displayed, which tracks the highest temperature point on the screen.
Image outlining: After the image is opened, the contours of all targets in the real-time screen can be drawn.
Super power-saving: If the super power-saving mode is switched on, a super power-saving icon appears, and the OLED brightness is nonadjustable and fixed at 20%. In this case, WIFI, hotspot tracking, and image outlining functions cannot be turned on. If they are already turned on, they can be turned off directly.
Screen brightness: 10 levels of screen brightness can be set.
Pseudo color: To set the pseudo color displayed in real-time screen, white thermal, black thermal, red thermal, iron red, blue thermal or green thermal can be selected.
Brightness: The screen brightness can be adjustable in a total of 10 levels.
Contrast: The screen contrast is adjustable in a total of 10 levels.

Screen enhancement: Enable the adjustable imaging quality and highlight the target details in real time.
Compensation mode: Manual or automatic compensation modes are available for the screen.
Smart stay: The automatic sleep time can be set to 5/10/15 minutes. If no operation is performed within the set time, the device starts the countdown to sleep.
After the countdown ends, the device sleeps.
Timed shutdown: The automatic shutdown time can be set to 15/30/60 minutes. If no operation is performed within the set time, the device will start the countdown to shut down. After the countdown ends, the device will shut down.
Timed closing menu: The time to automatically close the menu can be set to 10/20/60 seconds. If no operation is performed within the set time, the menu will be closed.
Fixed-duration video recording: The video recording duration can be set at 15s or 60s. After recording to the specified duration, the video will be automatically ended and saved. When the fixed-duration video recording turned off, the maximum video recording duration will be 99 minutes and 59 seconds.
Audio: When audio is turned on, audio will be recorded synchronously with the video, and sound will be played simultaneously with the video. When audio is turned off, then the recorded video will have no sound;
OSD: If OSD is turned on, all elements on the interface will be included in the images and video files saved after taking photos/videos. If OSD is turned off, no UI element on the interface will be included in the images and video files saved after taking  photos/videos, but all UI elements on the interface will still be displayed on the real-time screen as usual.
Watermark: If watermark is enabled, the time and date will be displayed in the bottom right corner of the screen. After taking photos and videos, the time information for saving the photos and videos will also be displayed.
Compass: When it is turned on, the direction pointed by the lens of the device will be displayed at the top of the screen.
Language settings: Support the switching among the languages such as English, Russian, German, French, Italian, Spanish, Japanese, Korean, Polish, Romanian, Norwegian, Swedish and Danish.
Unit: there are two optional units: meter and yard.
When one unit is selected, the target distance or vertical height will be displayed in the selected unit.
Time setting: Set the time and date on the device, and the results will be synchronized to the watermarked display.
Time format: 12H/24H systems are available for option, and the results will be synchronized to the watermarked display.
Date style: YYYY-MM-DD and DD-MM-YYYY are optional, and the results will be synchronized to the watermarked display.
Screen-off display: When the device enters the screen-off state after starting, the standby icon will be displayed on the screen to reduce the power consumption. Press any button on the device to restore screen display.
Bluetooth: Used to connect to a Bluetooth remote control, thereby controlling the device through remote control.
Memory card formatting: Delete all files from the memory card of the device.
Restore default: The device can be restored to factory settings. After being restored to the default, the device will automatically restart and display the language guidance interface.
About: The information, such as device software version and MAC address, can be viewed.
CLASS 1 LASER PRODUCT,COMPLIES WITH 21 CFR 1040.10 and CFR 1040.11
CLASS 1 CONSUMER LASER PRODUCT EN 50689:2021，WAVELENGTH 905nm PULSE WIDTH 60ns
MAXIMUM LASER POWER<1mW
IEC 60825-1:2014, EN 60825-1:2014+A11:2021

Item list

Guide for common troubleshooting

1. The device cannot be powered on.
   Solution: Replace the battery or connect the adapter to power on.

2. Device prompts that it is disabled to take photos/vedios.
   Solution: The memory space of the device is full, and it is necessary to format the memory card or disconnect the device from the computer.

3. The displayed time on the device does not match the actual time.
   Solution: Reset the time and date on the device in the menu.

4. The screen turns off during use.
   Solution: Short press the composite knob to wake up and light the screen.

5. The device imaging is blurry during use.
   Solution: Rotate the lens to manually focus until the display is clear.

Storage and transportation
Storage:

1. Storage conditions for the packaged product: wellventilated and clean indoor space at -30 ℃~60 ℃, with ≤95%RH, and no condensed or corrosive gas;
2. Please take it out and charge it at regular intervals of 3 months.

Transportation:
Avoid rain, water invasion, upside down, violent vibration and impact during transportation. Handle with care and do not throw the product.

FCC WARNING

This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is  made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.

FCC RF exposure Statement
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate(SAR). The SAR limit set by the FCC is 1.6 W/kg.
The highest SAR level measured for this device is less than SAR limit, so this device meets the FCC Requirement.

Special statement: the version of the guide will be updated after the technical improvement of the product.

References

• description.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>