COVID ECW-100 Wireless Extender Set User Manual
- June 13, 2024
- COVID
Table of Contents
COVID ECW-100 Wireless Extender Set User Manual
Introduction
Transmit video signals wirelessly to TVs or monitors from a variety of
sources. Compatible with Set-top boxes and Blu-ray disc players. No app
installation or WiFi network needed for device usage. This pocket sized
transmitter and receiver kit is portable and lightweight, making it easy to
transmit and cast your screen on the go. Transmit your favorite videos, games,
or presentations from all of your devices. Works perfectly with Windows,
MacOS, Android and iOS, supporting USB-C or HDMI.
Features
- Watch Everything on a Bigger Screen
- Plug and Play, Simple Setup without Installing App
- Impressive OS and port compatibility
- Multitask with Mirror or Extend Mode
- Pocket Size
Specifications
- Antenna: 1T1R (on board)
- Wi-Fi: 5Ghz
- Input: 5V / 1A
- Transmitter Interface: USB Type-C
- Receiver Interface: HDMI
- Output Wattage: 5 Watts
- Connectivity: Wi-Fi, USB, HDMI
- Controller Type: iOS, Android, Windows, MacOS
- Max Extenders Per Channel: 8 Max, 4 Recommended
- Color: White
- Dimensions: 6.89in (L) x 2.95in (W) x 1.77in (H)
Package Contents
Before using this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Transmitter ———————1PC
- Receiver ————————1PC
- User Manual ——————-1PC
Device Layout
Transmitter – Easily mirror whatever shows on your laptop or mobile
screen.
Receiver – Display the signal passed from your transmitter on the screen.
Operation Instructions
Install the receiver
First connect the Receiver to the HDMI port on the TV or monitor, and then
connect power to the USB-C port by an independent power 5V / 1A adapter.
Install the transmitter
Plug the Transmitter into the USB-C port on a laptop or mobile device. Wait a few seconds until the ashing light on the transmitter remains lit, and it will begin transmitting to the receiver automatically.
Note: 5V/1A adapter is sold seperately. If transmission becomes unstable or pairing fails, hold the reset button for 10 seconds.
How To Pair Transmitter With Receiver
Turn on pairing mode for the receiver
- Power up the receiver by an external adapter (5V / 1A).
- Plug the receiver into the HDMI port on the monitor.
- Press the reset button on receiver for 2 seconds. Release when the screen shows “ Release the button to pair”.
Press the PAIR button on transmitter
Plug in the transmitter to your laptop or mobile device via USB-C. Press the
PAIR button on the transmitter for 5 seconds to complete pairing while the
screen shows “Ready to pair”. After pairing, the device will start
transmitting to your display automatically.
Note: If pairing fails or display shows “Out of range” cycle power to both devices by unplugging and then replugging the USB-C power cables, and then repeat the pairing process from the beginning.
Device Updates
-
Enabling receiver SSID and PSK
-
Connect the receiver to the monitor, and then connect the USB-C end to a power source (5V / 1A).Press the reset
-
button on the receiver, and the monitor will display the SSID and PSK of the receiver, then release the button.
-
Connecting receiver to a network
-
Open the Wi-Fi settings on your phone or computer.
-
Connect to the SSID of the receiver in your Wi-Fi settings, and enter the PSK displayed on the monitor for the password to complete the connection.
-
Open a browser and enter 1 92.168.203.1 in the address bar.
-
Enter the settings page, turn on the internet settings, and connect the receiver to the network.
-
Upgrading over the web
-
Check the “router” icon on the monitor, and verify the receiver is connected to the network.
-
After connecting the receiver to the network, return to the settings page and select “Upgrade”.
-
The system checks the current version status. If there is a newer version, agree to update to complete the system upgrade.
-
Connect the transmitter to the USB-C port on your computer or mobile device, wait for a few seconds until the flashing light on the transmitter stops, and then the screen will automatically project.
-
Repeat “2) Connecting receiver to a network” and select “upgrade transmitter”. The system checks the current version status. If there is a newer version, agree to update to complete the transmitter upgrade. During the upgrade, the transmitter will be flashing fast, slow or will have no light. When the transmitter keeps its light on and the screen shows the mirrored content, the transmitter upgrade has flnished.
