TANGERINE TP-LINK VR300 FTTN/FTTB User Guide

June 3, 2024
TANGERINE

TANGERINE TP-LINK VR300 FTTN/FTTB User Guide

TANGERINE TP-LINK VR300 FTTNFTTB

FTTN/FTTB

tangerinetelecom.com.au

Physical appearance

FIG 1 Physical appearance

FIG 2 Physical appearance

Configuring your modem via setup wizard

To access modem gateway, enter http://tplinkmodem.net or http://192.168.1.1 in the address bar of a web browser.

  1. Log in with the account you set for the modem router, otherwise check the default username and password on the sticker of your modem.
    Note: Please ensure the password is strong and you memorise it. This will be the password for future logins.

FIG 3 Configuring your modem via setup wizard

2. Once logged in you will have the option to set up the modem via quick setup (set up wizard. Select the region and time zone as shown in below example. Click ‘Next’.

FIG 4 Configuring your modem via setup wizard

3. Select ‘Other’ From the ISP List as shown above. Click ‘ Next ’.

FIG 5 Configuring your modem via setup wizard

4. Under ‘Internet Setup’ choose the following settings:
For FTTN/FTTB NBN
Select VDSL and PPPoE and type in the username and password provided in your welcome email. Then click ‘Next’.
Example:

FIG 6 Configuring your modem via setup wizard

5. You can change the WiFi name and password here, otherwise click ‘ Next’.

FIG 7 Configuring your modem via setup wizard

6. This ‘Sorry’ message is expected at this stage. Please ignore this message and click ‘Next’.

FIG 8 Configuring your modem via setup wizard

7. Click ‘Finish’.

FIG 9 Configuring your modem via setup wizard

8. Again, please ignore this ‘Failed’ message and click ‘Finish’.

FIG 10 Configuring your modem via setup wizard

9. If configured correctly, the ‘Internet Status’ will now say ‘Connected’!

FIG 11 Configuring your modem via setup wizard

Manually Setup an Internet Connection

  1. Once logged in, go to Basic > Internet page. Select ‘Other’ in ISP, and related information will be automatically filled in.
  2. Then enter the information needed (username and password). Then click ‘Save’.
  3. Select PPPoE for the connection type. Enter the username and password provided in your email from us, and click ‘Save’ to apply the changes.

FIG 12 Manually Setup an Internet Connection

For FTTN/FTTB customers: Ensure that the ‘Operation Mode’ is set to ‘DSL Modem Router Mode’.

FIG 13

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals