oventrop 1507937 ”Cofit S” Compression fittings Instructions
- June 3, 2024
- oventrop
Table of Contents
oventrop 1507937 ”Cofit S” Compression fittings
Installation instructions
Description
The compression fittings ”Cofit S” can be used with the composition pipe ”Copipe” and standardised plastic pipes sized 14 x 2, 16 x 2, 17 x 2, 18 x 2 and 20 x 2 mm. Processing as described below for the composition pipe ”Copipe”.
Application
The Oventrop compression fittings ”Cofit S” are used in connection with the composition pipe ”Copipe” for heating systems, sanitary installations and rainwater usage plants.
Installation
-
Cutting pipe to required length
The composition pipe ”Copipe” is cut at a right angle to the required length with an Oventrop pipe cutter or pipe shears, item nos. 1509580 or 1509567. -
Deburring and calibrating
By using the Oventrop universal tool, item no. 1509594 or 1509596, the composition pipe can be calibrated and the inner pipe layer can be deburred at the same time. Choose the calibrating and deburring mandrel suitable for the pipe dimension, insert fully into the pipe whilst turning the tool clockwise. Rotate mandrel for at least a further half turn. Remove the tool from the pipe and any shavings will be pulled out automatically. Compression fittings for connections with male thread
Please observe operating instructions. -
Check that the end of the pipe is clean and accurately deburred.
-
Fit compression fittings with male or female threaded connections as per corresponding drawing.
Care must be taken to ensure that the O-rings are not damaged or pushed out of the grooves. -
The composition pipe must be pushed completely onto the fitting.
-
Tighten collar nut or pressure screw with the appropriate tool.
(14, 16 , 18 and 20 mm – approx. 40 – 50 Nm) (26 and 32 mm – approx. 80 – 90 Nm). -
Use the compression fittings only once!
-
Leakage testing
Please ensure that all standard leakage test procedures are carried out. Subject to technical modification without notice.
Compression fittings for connections with female thread
”Cofit S” Compression fittings
Documents / Resources
|
oventrop 1507937 ”Cofit S” Compression
fittings
[pdf] Instructions
1507937 Cofit S Compression fittings, 1507937, Cofit S Compression fittings,
Compression fittings, fittings
---|---