oventrop Regudis W-HTE GT Electronic Dwelling Station Owner’s Manual

oventrop Regudis W-HTE GT Electronic Dwelling Station

Product Information

Product Specifications:

• Product Name: Regudis W-HTE GT Electronic dwelling station
• Width: 440 mm
• Control: Electronically controlled
• Benefits: Energy efficient, lower costs, suitable for heat pumps, compatible with renewable energies

Product Usage Instructions

Installation:
To replace a gas boiler efficiently with the Regudis W-HTE GT dwelling station:

1. Install the Regudis W-HTE GT dwelling station in just one hour.
2. Connect the primary supply and return to the chimney shaft.
3. Connect the Regumat station for heating circuit connection.
4. Add a buffer storage cylinder.
5. Connect to a heat generator like a heat pump or district heating.
6. Install a water meter.

Benefits:

• Higher energy efficiency with electronic control.
• Lower investment, operating, and maintenance costs.
• Low excess temperature.
• Suitable for use with heat pumps.
• Easily compatible with renewable energies.

Versions Available:
Regudis W-HTE GT versions:

Station including shutoff valves and surface-mounted
bonnet| –| 1344231, 1344251

Designing Dwelling Stations:
If you want to design dwelling stations, you can use OVplan for planning and design. Download OVplan for free at ov.de/ovplan or contact your Oventrop representative for assistance.

Contact Information:
For further assistance or inquiries, visit regudis-gt.oventrop.com or contact your Oventrop representative.

Frequently Asked Questions

Q: Can the Regudis W-HTE GT dwelling station be easily installed?

A: The installation process is quick and can be completed in just one hour.

Q: What are the benefits of using the Regudis W-HTE GT dwelling station?

A: The benefits include higher energy efficiency, lower costs, suitability for heat pumps, compatibility with renewable energies, and a precisely fitting surface-mounted bonnet.

Q: How can I get assistance in planning and designing dwelling stations?

A: You can use OVplan for planning and design or contact your Oventrop representative for personalized assistance and support.

Energy turnaround is in five words: Gas boiler out, Regudis in.

• The modernization of heating systems is a big challenge for the next few years. In existing buildings, gas boilers can best be replaced with dwelling stations. Conversion to central heat generation in combination with decentralized dwelling stations is economical and efficient.
• Central heat generation is future-proof as renewable energies – such as district heating or heat pumps – can be integrated more easily. Electronically controlled dwelling stations are more efficient than hydraulic ones.

THE EFFICIENT SOLUTION

OUR ELECTRONICALLY CONTROLLED REGUDIS W-HTE GT

• We have a quick, clean, and efficient solution for replacing gas boilers: our electronically controlled Regudis W-HTE GT dwelling station is easy to install in just one hour – even in existing buildings. With a width of 440 mm, it fits exactly in the place of the old gas boiler. And the precisely fitting surface-mounted bonnet is included.
• You can simply use existing connections for hot and cold water and heating circuit supply and return – because the connections of the Regudis W-HTE GT are arranged in the same way as those of the most common gas boilers. This allows you to connect without a junction. The connection to and from the buffer storage cylinder is made from the top via the chimney. And commissioning is just as easy as you are used to with the Regudis W-HTE dwelling station.
• Do you have an installation situation with critical water conditions? That’s why we offer the heat exchanger with a Sealix® protective layer.

YOUR BENEFITS AT A GLANCE

• The well-known concept of the Regudis W-HTE

• Electronic control for higher energy efficiency

• Lower investment, operating, and maintenance costs

• Low excess temperature

• Suitable for heat pumps

• Easily compatible with renewable energies

• Including perfectly fitting surface-mounted bonnet

Learn more at regudis-gt.oventrop.com.

Quick planning, clean installation

Our precisely fitting dwelling station

Replace a gas boiler efficiently

You can install our dwelling station easily, in just one hour.

1. Regudis W-HTE GT dwelling station
2. Primary supply and return in the chimney shaft
3. Regumat station for heating circuit connection
4. Buffer storage cylinder
5. Heat generator, e.g. heat pump or district heating
6. Water meter

Our Regudis W-HTE GT

versions at a glance

YOU WANT TO DESIGN DWELLING STATIONS

• We support you in planning and design right from the start: You can easily design our dwelling stations with OVplan.
• We are also happy to help you personally. Just contact your Oventrop contact person.
• Download OVplan free of charge at ov.de/ovplan.

Oventrop is the partner for efficient heating, cooling, and clean potable water. The modular systems and services offer pioneering solutions that all HVAC experts use to work with – easily and flexibly – from planning to installation, from industry to trade. As a family business, Oventrop has accompanied all its partners over many years – competently and personally.

Oventrop GmbH & Co. KG ·

• Paul-Oventrop-Str. 1 · 59939 Olsberg, Germany
• Tel. +49 2962 820
• Fax +49 2962 82400
• E-mail mail@oventrop.com
• Web www.oventrop.com.

References

• Oventrop United States of America
• Oventrop United States of America

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>