ARDESTO HC-Y40-DBS Hair Clipper Instruction Manual

ARDESTO HC-Y40-DBS Hair Clipper

Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use the product only as described and only for the specified areas of application. In addition, pass these documents on, together with the product, to any future owner.
Save the device packaging for future use, as it contains important information. All images in the instruction manual are for reference only. The actual device may vary slightly.

INTENDED USE

These hair clipper are intended exclusively for the cutting and trimming of hair in domestic households. This appliance is not intended for use in commercial/industrial applications. Usage other than as described here is not permitted and may cause damage or injury. For damage resulting from misuse or improper handling, the use of force or unauthorized modification, no liability will be assumed.

Safety instructions

To avoid the risk of accidents and injuries:

• This device can be used by children over 8 years of age and persons with limited physical and mental or sensory abilities or with a lack of experience and knowledge if they are under constant supervision or instructed in the safe use of the device and they understand the possible dangers.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and service should not be carried out by children without supervision.
• Use only the original accessory parts for this device.
• Check the cutting head for proper function before using the appliance.
• Never use the appliance with a damaged or broken attachment comb. The absence of teeth on the attachment comb can lead to injury.
•  Switch the appliance off before you put it down.

To avoid the risk of an electric shock:

•  Connect the plug of switching adaptor only to correctly installed and earthed mains sockets that are easily accessible. Ensure that the rating of the local power supply tallies completely with the details given on the rating plate of the device.
• The device should only be used with the power supply unit (mains adapter) that is supplied with the device.
•  Do not use the appliance in the close vicinity of a bath/shower or a sink filled with water. The proximity of moisture presents a danger, even when the appliance is switched off.
•  The device must only be supplied with safety extra-low voltage in accordance with the markings on the device.
•  Never submerse the appliance in water or other liquids.
• Should the appliance be dropped into water, absolutely disconnect the plug from the mains socket before extracting the appliance.
• After use or when cleaning it, always remove the plug of switching adaptor from the mains power socket. Do not pull on the cable of switching adaptor directly, pull the plug.
•  The appliance is suitable for use only in dry areas.
•  Attention! Keep the appliance dry.
•  Do not use the unit while the human is being bathed or when the hair is wet.

ITEMS SUPPLIED

• Hair clipper x 1
• Switching adaptor x 1
• Charging base x 1
• Cleaning brush x 1
• Oil bottle x 1
• Attachment comb x 4
• Blade guard x 1
• Instruction manual (warranty card is included) x 1

DESCRIPTION OF THE APPLIANCE

Appliance

1. Adjust blade button
2. Detachable blade set
3. Led display  on unit
4. Housing
5. Rotate ON/OFF speed switch cover
6. Charging base
7. LED display on charging base.

ATTACHED

1. Switching adaptor;
2.  Cleaning brush;
3. Oil bottle;
4. Comb-12mm.;
5. Comb-9mm;
6. Comb-6mm;
7. Comb-3mm;
8. Blade guard.

PRODUCT FEATURE

Comb attachment:
You can choose between 4 comb attachments and 4 hair length after cutting:

• 4 = Comb 12mm: 12mm hair length after cutting;
• 5 = Comb 9mm: 9mm hair length after cutting;
• 6 = Comb 6mm: 6mm hair length after cutting;
• 7 = Comb 3mm: 3mm hair length after cutting.

Put the comb attachment required on the cutting head and into the metal edge of cutting head (see illustrations below). Ensure that the attachment  has into place before you start shearing or trimming the hair. Detachable blade set for easy cleaning.
Settings adjustable moving blade (0.5/1.0/1.5/2.0/2.5mm).
Move adjusting blade button LED digital and symbol display for kind function description LED display figure

• Charge/discharge current capacity display (%):

• Charge current capacity display in turn:
  00%- 20% 30% 40% 50%  60%  70%  80% 90%  100%

• Discharge current capacity display in turn:
  100% 90%  80%  70%  60%  50%  40%  30%  20%  10% 00%

•  Oil bottle symbol; plug symbol

• When turn on appliance and operate it for 30 minutes, Oil bottle symbol will Display, Need oil blade.

•  When plug the power adapter with unit into a wall outlet, plug symbol display and light continually

• Rotate switch for On/off and / high/middle/low speeds 3 setting 5.1 When first rotate ON/OFF/speed switch cover clockwise, the appliance
  is on and the speed of appliance is low setting. Speed setting display low setting symbol .

•  When second rotate ON/OFF/speed switch cover clockwise, the appliance is on and the speed of appliance is middle setting. Speed setting display middle setting symbol

•  When third rotate ON/OFF/speed switch cover clockwise, the appliance is on and the speed of appliance is high setting. Speed setting display high setting symbol .

• Vice versa. Cycle operation one by one

•  Switching adaptor can directly drive the motor.

• Charging time: ≤180 mines after full charge .

• Operation time: 150 times when fully charged

Before Operation

Charge
The best environmental temperature for changing is between 15°C and 35°C

• Before using the hair clipper for the first time, it must be fully charged for 180 minutes. Plug the power adapter into a wall outlet and plug the DC jack into the back of the charger base, the LED display of base will  display continually ,place the hair clipper into the  charger base and be sure the LED display is lights that the unit is charging.
• When the appliance is charged & placed on base or connected to
• The plug symbol will start flashing when the unit reaches low battery capacity during operation, it is time to charge.
• Once the appliance is completely charged, charge/discharge current capacity (%) will display 100%. It through normal use. Then recharge to  full capacity. Maximum battery capacity will only be reached after several charging and discharging cycles.
• The adapter and appliance may become warm while charging; this is normal operation.
•  Plug the power adapter into a wall outlet and plug the DC jack into the unit. When charge the appliance, it can be used to cut the hair, charge/discharge current capacity (%) will display continually.
•  Note: Please do not operate the unit connected to the power adaptor for a long time or it may burn out the adapter.
• The switch adaptor automatically adapts to any worldwide Ac voltage (from 100 to 240V)

Unplug the adaptor from the wall and the charge base when not in use. Do not unplug the adapter from the wall when it is still connected to the appliance. This will cause the battery to discharge.

OPERATION

For best cutting performance

• The hair to be cut must be dry and clean
•  When turn on unit first time and continuously operate unit for 30 minutes, the blade head should be oiled severally a drop of oil in  figure five positions of blade. For this, use the supplied blade oil.
• Put the attachment comb required on the cutting head, you can choose the fourth comb attachments enable cutting lengths between 3 and 12mm.(See illustrations above). start with the largest position cutting  length first. And, if necessary, use a position shorter one.
• Rotate ON/OFF/speed switch cover clockwise and appliance is on.
• Adjust the appliance speed on by rotating ON/OFF/speed switch cover clockwise again. We recommend low setting and to trim a small area first to familiarize yourself with the attachment comb.
•  Hold the trimmer against the hair, the teeth of the clipper guide pointing upwards yet flat against the head.
• Move the trimmer upwards and out wards through the hair, a little at a time, against the direction of hair growth.
• Adjust the appliance speed on by rotating ON/OFF/speed switch cover clockwise again. We recommend low setting and to trim a small area first to familiarize yourself with the attachment comb.
•  Hold the trimmer against the hair, the teeth of the clipper guide pointing upwards yet flat against the head.
• Move the trimmer upwards and out wards through the hair, a little at a time, against the direction of hair growth.
•  The appliance will work most efficiently when cutting through the hair at its own speed. Never force the trimmer through the hair. Never switch the trimmer off whilst in the hair.
•  For longer hair on top of the head, use the long comb and lift hair on top of the head, cutting over the comb, or hold the hair between the fingers and cut to the desired length. Always work from the front to the back of the head.

To outline

• Do not attach a attachment comb
• Hold trimmer upside down and holding it gently against the skin at the length desired, move downward.
• Having defined the outline, gently hold the trimmer against the skin, the teeth of the trimmer pointing up wards and move the trimmer upwards against the direction of hair growth to the defined outline. This will trim the unwanted hair adjacent to the outline.

CLEANING AND CARE

Risk of electric shock
Before cleaning, Rotate ON/OFF/speed switch cover anticlockwise and appliance is off. remove the plug of the switch adaptor from the mains power socket.
Never submerse the appliance in water or other liquids.

• Take the attachment comb if fitted off
• Take the detachable blade set (see illustrations below).
• Using exclusively the cleaning brush, remove he hair from the cutting head. The cutting  head may not be cleaned with water or other iquids, except medical alcohol!
• If in regular use, the cutting head should be oiled. For this, use the supplied blade oil
• Remove excess oil with a dry cloth.
• Clean the housing with a soft, dry lint-free cloth.
•  Store the appliance in a dry and dust free location.
•  When the blade head is installed, the adjust blade button needs to be pushed down to the lowest position, and then the blade head is installed so that it can be installed well.

DISPOSAL

• Do not dispose of the device in your normal domestic waste.

Dispose of the appliance over a registered waste disposal firm or at your local community waste disposal facility. Observe the currently applicable regulations .In case of doubt  , please contact your waste  disposal centre. Dispose of all packaging materials in an environmentally friendly manner.
The manufacturer reserves the right to make changes to the technical specifications and design of products that do not affect performance.

Warranty conditions

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual. Service life of the product is 5 years. In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card. In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1.  Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The service life of household appliances is 5 years.
3.  The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
6. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   •  mechanical damage;
   •  damage caused by the ingress of foreign objects, substances, liquids, insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   •  when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   •  lack of serial number of the device, or inability to identify it.
7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
8. The warranty period is 12 months from the date of sale.

• Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
Customer Signature

Warranty card

Product information

• Product
• Model
• Serial number
• Seller Information
• Trade organization name
• The address
• Date of sale
• Seller stamp

Coupon Seller stamp

• Date of the application
• Cause of damage
• Date of completion

Coupon Seller stamp

• Date of the application
• Cause of damage
• Date of completion

Coupon Seller stamp

• Date of the application
• Cause of damage
• Cause of damage

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>