Saluki Tec S1134 Series Multi Channel Signal Generator Owner’s Manual
- June 12, 2024
- Saluki Tec
Table of Contents
S1134 Series Multi-channel Signal Generator
(Frequency Range: 10MHz – 40GHz, 2-8 channels)
Owner’s Manual
Key Features
- Frequency range: 10MHz to 40GHz
- 2-8 RF output channels which can operate individually
- Maximum output power: ≥+15dBm
- Phase noise: <-116dBc/Hz (10GHz, 10kHz offset)
- Phase coherent among every channel
- Channel to channel relative phase drift (10GHz, 24h) ≤±1°
- High-speed frequency switching <10us
- Narrow pulse modulation, minimum pulse width 50ns
- Rise/fall time 10ns
Overview
Saluki S1134 series signal generator is a phase-coherent and low phase noise
signal generator with 2-8 channels. Every channel can be independently fully
adjusted.
S1134 series can cover frequency range from 10MHz to 40GHz with frequency
resolution as low as 0.01 Hz.
The instrument comes in a standard 2U/3U rack-mount form and offers LAN
control interface, which allows easy and fast communication. Remote control of
the instrument can be quickly attained from any host system. Application
programming interface (API) or programming examples make the control
implementation very easy.
Applications: Local Oscillator Replacement / Component Test / Receiver
Sensitivity Test / R&D low noise microwave generator
Technical Specifications
| Model | S1134 Series |
|---|
Output
Frequency Range| 10MHz – 20/40GHz (each channel can be different)
For other frequency range, contact us for customization
Output Channel| 2-8 channels
Frequency Resolution| 0.01Hz
Maximum Output Power| 10MHz to 20GHz: +15dBm
20GHz to 40GHz: +13dBm
Minimum Output Power| -110dBm
Power Resolution| 0.01dB
Switching Speed| ≤20ms
Power Level Uncertainty| ≤±1.3dB @>-20dBm
≤±1.5dB @-20 to -70dBm
≤±3dB @≤ -70dBm
Harmonic Spurious| ≤-50dBc @10dBm output
Non-harmonic Spurious| 10MHz – 12GHz: ≤-70dBc
12GHz – 20GHz: ≤-65dBc
20GHz – 40GHz: ≤-60dBc
Channel to Channel Isolation| ≥80dB
Pulse Modulation| Minimum pulse width 50ns
SSB Phase Noise (@10GHz )| ≤-86dBc/Hz@100Hz
≤-108dBc/Hz@1KHz
≤-116dBc/Hz@10KHz
≤-116dBc/Hz@100KHz
≤-120dBc/Hz@1MHz
≤-140dBc/Hz@10MHz
SSB Phase Noise (@10GHz )| 
---|---
Frequency Reference
Both external and internal reference supported
Internal Reference Frequency Temperature Stability| ±5e-8, 0°C to+50°C
Internal Reference Frequency| 10MHz
Internal Reference Output Power| ≥ 5dBm
External Reference Input Level Range| 5dBm – 10dBm
SSB of Internal Reference| ≤-125dBc/Hz@10Hz
≤-140dBc/Hz@100Hz
≤-150dBc/Hz@1KHz
≤-155dBc/Hz@10KHz
≤-155dBc/Hz@100KHz
General Information
LAN Control| RJ-45 (TCP/IP over Ethernet )
Operation Temperature| 0°C to +50°C
---|---
Operation Humidity| 20%-80% (+30°C)
Power Supply| AC 176-264VAC, 45Hz-65Hz
Dimension| 483 (W) × 89 (H) × 559 (D) mm (2U)
483 (W) × 134 (H) × 559 (D) mm (3U)
Weight| ≤20kg
Ordering Information
The output frequency of each channel can be configured flexibly.
| Module No. | Item |
|---|---|
| S1134D | 2-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134T | 3-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134Q | 4-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134F | 5-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134S | 6-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134H | 7-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134O | 8-channel output, frequency range: 10MHz-20GHz/40GHz |
Example:
S1134T-224: 3CH output, t channels are 10MHz-20GHz, 1 channel is 10MHz-
40GHz.
S1134Q-2222: 4CH output, all channels are 10MHz-20GHz.
Note: Information will conduct the necessary updates, the contents of
this document are subject to change without notice
No.367, Fuxing N. Rd.,105 Taipei,Taiwan
Tel: +886.909 602 109
[email protected]
www.salukitec.com