BORMANN Elite BHA1920 Hand Blender User Manual

BHA1920 Hand Blender User Manual

Key parts name and location

Safety instructions

General

• If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person.

• Switch off the appliance before changing accessories or approaching parts which move in use.

• Take special care when preparing food for babies, the elderly and infirm. Always ensure that the hand blender shaft is thoroughly sterilized. Use a sterilizing
  solution in accordance with the sterilizing solution manufactures instructions.

• Never touch the blades while the machine’s plugged in.

• Keep fingers, hair, clothing and utensils away from moving parts.

• Unplug after use and before changing attachments.

• Never blend hot oil or fat.

• Don’t let children or infirm people use the hand blender without supervision.

• Never use a damaged hand blender. Get it checked or repaired.

• Never put the power handle in water or let the cord or plug get wet-you could get an electric shock.

• Never let the cord touch hot surfaces or hang down where a child could grab it.

• Never use an unauthorized attachment.

Chopper Attachment

• Care is needed when handing cutting blade, especially when removing the blade from the bowl, emptying the bowl and during cleaning, Don’t touch the sharp blades.
• Remove the chopper blade before emptying the bowl.
• Never remove the cover until the blade has completely stopped.

Important

• With heavy mixtures, don’t use your hand blender for longer than 15 seconds in any four minute period – it’ll overheat.
• Its intended domestic use.

Before Plugging In

• Make sure your electricity supply is the same as the one shown on the power handle.

Before Using for the First Time

• Remove all packaging and throw away the blade covers.

To Use the Hand Blender

• You can blend baby food, soups, sauces, milk shakes and mayonnaise.
• Short Rating Time: 10 sec.

For Beaker Blending

• Don’t fill the beaker above 800ml.

Operating Instructions

For Saucepan Blending

• Take the pan off the heat and let it cool slightly. Otherwise your hand blender could overheat.
  1. Fit the power handle inside the blender shaft, turn and lock.
  2. Plug in. To avoid splashing, place the blade in the food before switching on.
  3. Hold the power handle steady. Then press the button.

• Don’t let liquid get above the join between the power handle and blender shaft.

• Move the blade through the food and use a stabbing action.

• If your blender gets blocked, unplug before clearing.
  4. After use, unplug and dismantle

To Use the Chopper

• You can chop meat, cheese, vegetables, herbs, bread, biscuits and nuts.
• Don’t chop hard foods such as coffee beans, ice cubes, spices or chocolate – you’ll damage the blade.
  1. Remove any bones and cut food into 1-2cm cubes.2. Fit the chopper blade over the pin in the bowl.
  3. Add your food
  4. Fit the chopper cover, turn and lock.
  5. Fit the power handle, turn and lock.
  6. Plug in, hold the bowl steady, then press on/off button.
  7. After use, unplug and dismantle.

Technical Data

Power: 1200w
Mixing bowl capacity: 800ml

Processing Guide

FOOD| MAXIMUM AMOUNT| APPROXIMATE TIME
(in seconds)
---|---|---
Meat| 300g| 10
Herbs| 80g| 10
Nuts| 250g| 10
Cheese| 250g| 10
Bread| 1 slice| 10
Hardboiled eggs| 6| 5
Onions| 300g| 10

Cleaning

• Always switch off and unplug before cleaning.

• Don’t touch the sharp blades.

• Take special care when preparing food for babies, the elderly and infirm. Always ensure that the hand blender shaft is thoroughly sterilized. Use a sterilizing
  solution in accordance with the sterilizing solution manufacturers instructions.

• Some foods, egg carrot, may discolors the plastic. Rubbing with a cloth dipped in vegetable oil helps remove discoloring.

Power handle, Chopper Cover, Whisk Collar

• Wipe with a damp cloth, then dry.
• Never immerse in water or use abrasives.

Blender Shaft, Chopper Blade, Whisk, Beaker, Bowl

• Wash up, then dry.

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech nicians of the authorized service department of the manufacturer.

WWW.BORMANNTOOLS.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>