Godox TL30 RGB Tube Light Instruction Manual

TL30 RGB Tube Light
Instruction Manual

Foreword

Thank you for purchasing this Godox Product!
This RGB Tube Light TL30 is a multifunctional RGB light with dual color temperature, high light brightness and wireless adjustment. Suitable for almost all shooting occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding, children photography, etc. It’s portable and easy to be operated.
Features:

• Freely switch LED CCT mode,RGB mode and 37 special effects modes.
• Easy to adjust color temperature, light brightness, hue and color saturation.
• Remote control by smartphone APP.
• Use in combination to make more creative light groups.
• Both ends have magnetic absorption function, can be attached to the plane of iron products.
• Lightweight and portable, it can be held by hand, and the angle can be flexibly changed.

Warning
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Keep out of reach of children
As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
Do not use the flash untin the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this fiash unit and fire or electromagnetic interference may result.
As this product has builin lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over 40°C.

Names of Parts

1. Main Body
2. Power Switch
3. MOD Button
4. DIM Button
5. Select Dial
6. Display
7. Type-C USB Port
8. Screw Hole
9. Magnetic Absorption

What’s in the Box

Battery Management

1. Power Supply
   With built-in ithium battery which can offer about 1 hour’s lighting in 100% brightness once got fully charged.
   The light can also be charged through USB cable.

2. Charge
   The whole charging takes about 1 hour and 30 minutes when using 5V/2A charger (optional). The charge grids indicator will be blinking in charging while displaying full grids once got fully charged.

Operation

1. Power Switch
   Long press the switch power button for 1.5 to tum on o offi. Then, the current information will be displayed on the OLED panel.

2. Mode Selection: CCT Mode/RGB Mode/Special Effects Mode
   Press MOD button to switch different modes:2.1 Bicolor Mode
   2.1.1 Colortemperature adjustment: turn the select dial to adjust the color temperature from 2700K to 6500K.
   Adjustmentin 500 values quickly or 100 value normally by turning the select dial.
   Press DIM button againto confirm, and the parameter stops flashing. 2.1.2Pressthe DIMbutton, then, press DIM button and the brightness value will be: blinking, Turn the select dial to adjustthe value. Adjustmentin 10 values quickly or 4 value normally by turning the select dial.2.1.3 Hue adjustment: press the MOD button to switch to CCTinterface. Press down the selectdial to choose G/M and turn the select dial to adjust hue from -50 t00and 0 to +50. Adjustmentin 5 values quickly or 1 value normally by turning the.2.2 Colorful Mode
   2.2.1Adjusthue H: press the MOD button to switchto HSl nterface. Press down the selectdialto choose Hand tur the select dial to adjust hue. Adjustmentin 10 values quickly or 1 value normally by turning the select dial.2.2.2Adjustsaturation S: in HSl nterface, press down the select dial to choose S and turn the select dial to adjust saturation. Adjustmentin 10 values quickly or 1
   value normally by turning the select dial.

3. Special Effects Modes (13 categories divided into 37 kinds)
   3.1 Press the MOD button to switch to FX interface. Turn the select dialto choose light effects categories from 110 13.3.2After choosing the current mode, press down the FN multifunctional select dial
   from II and III. 3.3 There’re 37 kinds of situational special effects mode which are divided into 13 categories for your choice. No.| Display| Situation| Display| Display II| Display III
   ---|---|---|---|---|---
   1| | RGB cycle| Slow speed| Medium speed| Quick speed
   2| | Flash| Flash| Press conference| Paparazzi
   3| | Laser| Birthday party| KTV| Disco
   4| | Lightning| Discontinuous| Frequent| Sustainable
   5| | Broken bulb| Discontinuous| Frequent| Sustainable
   6| | TV| Slow speed| Medium speed| Quick speed
   7| | Candle| Discontinuous| Frequent| Sustainable
   8| | Fire| Firewood| Campfire| Fire hazard
   9| | Firework| Brief| Continuous| Show
   10| | Police car| Strong flash| Frequent flash| Quick flash
   11| | Fire truck| Strong flash| Frequent flash| Quick flash
   12| | Ambulance| Strong flash| Frequent flash| Quick flash
   13| | sos| | |

4. Bluetooth Control
   4.1 Bluetooth ON/OFF: long press the MOD button to enter Bluetooth interface.
   Tum the select dial to choose the Bluetooth and press down to setitto ON or OFF.4.2 Scanthe QR code to download the “Godox Light” smartphone APP(can be used by Android and Apple.
   system). For more smartphone APP operations, please openthe “help” in APP to gain detailed quidance.

   http://www.guteleben.com/html/dl_app/c_ble/GodoxLight/index.html

4.3 Bluetooth resetfunction: in Bluetooth interface, tum the selectdial to choose RESET. Then, press down the selectdial untilthe RESET s displayed. The screen will auto backto Bluetooth interface after being successfully reset. Note: the APP can be used directly to the firstly installed device (smartphone or Pad) When changing to other mobile dovics, the light shall be reset before the normal usage of APP.

Technical Data

minutes
Control Method| Smartphone APP
Bluetooth Wireless Control Distance| 3Om
Operation Temperature| -10-40 °C
Dimension| Φ 42*300MM
Net Weight| 0.3Kg
BT Frequency Range| 2402.0-2480.0MHz
Max. Transmitting Power| 5dbm

• Product design and spcifcation are subject o change without notice.

Maintenance

This product, except consumables e.g. adapter and adapter cable, is supported with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly.
Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
Unauthorized service wil void the warranty.
Ifthe product had failures or was wetted, do not use it until it is repaired by professionals
Changes made to the specifications or designs may not be reflected in this manual.

Warning
Operating frequency:2412 99MHz — 2464.49MHz(2.4G only receive)/2402MHz — 2480MHz(BT)
Maximum EIRP Power: 1.33dBm

Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/DOC/Godox_TL30_DOC. pdf.
The device complies with RF specifications when the device used at Omm from your body.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller
Applicable Products)
The document applies to the products listed on the Product Maintenance Information (see below for further informatior). Other products or accessories (e.g. promotional items giveaways and additional accessories attachedetc) are notincluded in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period s calculated from the day(purchase date) when the product is bought for the first ime And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

1. The product or accessory has expired its warranty period;
2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
4. The original identifying information of product or accessory is modified, alternated, or removed;
5. No valid warranty card;
6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
7. Breakage or damage caused by force majeure or accident;
8. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

designated site
Battery| 3| Customer sends the product to
designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.| 12| Customer sends the product to
designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc.| No| Without warranty

Godox After-sale Service Call 0755-29609320-8062

http://www.guteleben.com/html/dl_app/c_ble/GodoxLight/index.html

Godox Light” APP
Scanthe QR code directy o downloadthe.
GodoxLight” smariphone APP

GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone,
Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com Made in China
705-TL3000-00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>