BORMANN Elite BHC2100 Hair Dryer Instruction Manual
- June 5, 2024
- BORMANN Elite
Table of Contents
BORMANN Elite BHC2100 Hair Dryer
Safety warnings
- The hair dryer must be connected to an 220-240V power supply socket.
- The inlet and outlet of the device must never be covered or blocked in order to avoid overheating or mechanical damage.
- Never use the hair dryer in the vicinity of woven fabrics, paper or other flammable materials, otherwise it will easily lead to a fire.
- Never use the hair dryer near gas or other highly flammable materials.
- Do not insert hair pins or other unsuitable items into the air inlet and outlet of the hair dryer, otherwise the hair dryer will damaged, or else an electric shock accident may occur.
- Warning: Never use the hair dryer in bathrooms.
- The hair dryer is not suitable for drying children’s hair.
- After use, make sure that the hair dryer switch is set to the off position, disconnect the plug from the socket.
- Use a soft cloth to clean the hair dryer’s parts when it has been wet, never use oil or detergents.
- Do not touch the device with wet hands in order to prevent accidents.
- Do not use the hair dryer near bathtubs or other water containers.
- If the power cable is damaged, make sure to deliver the device for repair to an authorised service department before the next use.
- In order to increase protection, a rated residual current device is recommended to be connected to the electrical circuit.
- The RCD device must not exceed 30MA. Please consult a professional RCD installer.
Operating instructions
- Set the power switch to ”0” position in order to turn off the hair dryer.
- Set the power switch to ”I” position in order to select the low power function. II: Set the power switch to ”I” position in order to select the high power function.
Technical Data
-
Voltage: 220-230V
-
Frequency: 50/60Hz
-
Power: 2100W
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
-
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
-
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.