RUSH CHARGE LMP-12 Wireless Charger Power Bank Instruction Manual

RUSH CHARGE LMP-12 Wireless Charger Power Bank

Wireless Charger Power Bank LMP-12

Specifications

• LED Indicator
• USB-C Port (Output & Input)
• Foldable Stand
• Power Button
• Lightning / Micro USB / USB-C Cable
• Alignment Magnet

Product Usage Instructions

Charging the Power Bank

1. Connect the provided Lightning / Micro USB / USB-C cable to the USB-C port of the power bank.
2. Connect the other end of the cable to a compatible power source (e.g., wall adapter or computer).
3. The LED indicator will light up to show that the power bank is charging. The number of blue LEDs lit indicates the current battery level.
4. Wait until all four blue LEDs are lit, indicating that the power bank is fully charged.
5. Disconnect the cable from the power bank and the power source.

Wireless Charging

1. Place your wireless charging-enabled device on the foldable stand of the power bank.
2. Ensure that the alignment magnet on the power bank and your device are properly aligned.
3. Press the power button once to activate wireless charging. The LED indicator will turn blue, and the green LED will flash three times to indicate that wireless charging is activated.
4. The LED charge meter will indicate the battery level of the power bank during wireless charging. One blue LED represents 1-25% charged, two blue LEDs represent 25-50% charged, three blue LEDs represent 50-75% charged, and four blue LEDs represent 75-100% charged.
5. If the battery level of the power bank is low, the first blue LED will flash. Connect the power bank to a power source to charge it.
6. To stop wireless charging, press the power button twice. The LED indicator will turn off, and wireless charging will be deactivated.

Frequently Asked Questions (FAQ)

• 1. What devices are compatible with the LMP-12 Power Bank?
  The LMP-12 Power Bank is compatible with any wireless charging-enabled device and can also be used to charge devices that support charging via Lightning, Micro USB, or USB-C cables.

• 2. Can I charge the power bank and my device simultaneously?
  Yes, you can charge the power bank and your device simultaneously by connecting them using the provided Lightning / Micro USB / USB-C cable.

• 3. How long does it take to fully charge the power bank?
  The charging time of the power bank may vary depending on the power source used. It typically takes approximately X hours to fully charge the power bank.

MODEL : LMP-12 LMP

1. To Charge The Powerbank
   Connect the powerbank to power sources or USB port of a computer via Type-C port. LED indicator will be light up if it is charging Once the powerbank is fully charged, please remove the charging cable from the product.

2. To Charge Mobile Devices
   By Cable : Connect your mobile device to the USB-C port of the power bank via charging cable, press power button to start charging.

3. Wireless : Press the power button and the green LED will light up. Match the wireless transmission area to the middle of a MagSafe device’s back, the magnet will snap the powerbank on the device.

Power Indication

Safety Notes

• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications. Do not modify the device in any way. Doing so voids the warranty.
• Do not continue to operate the device if it becomes visibly damaged.
• Use the product for its intended purpose only.
• Keep this product, as all electrical products, out of the reach of children.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Lay all cables so that they do not pose a tripping hazard
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
• Dispose of packaging material immediately according to locally applicable regulations.
• When charging batteries built into a device, pay attention to the maximum charging time for the batteries.

Warranty Terms & Condition

The product comes with a twelve (12) month factory warranty from the date of purchase. Your product is in perfect condition. In the event where a replacement unit is needed, the owner must provide the original receipt of purchase in order to grant replacement, providing the defect falls under warranty terms. If your unit has been disassembled or repaired without the manufacturer’s authorization, the warranty will be immediately voided. The owner is responsible for any fee and charges of delivering the unit back to the agent or manufacturer.

Explanation Of Warning Symbols And Notes

• This product is compliant with the FCC directive
• This product is compliant with the CE directive.
• This symbol indicates uninsulated material within your uniy may cause an electrical shock. For safety, please do not remove product covering.
• This symbol indicates direct current.
• This symbol indicates attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• Do not dispose of your product with other household waste. Please act according to local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for complianc could void the user’s authority to operate the equipment.

• NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Manual Folding Method

Technical Specification

1. LED Indicator
2. USB-C Port (Output & Input)
3. Foldable Stand
4. Power Button
5. Wireless Power Transmission Area
6. Alignment Magnet

Content

• 1 × Magnetic power bank
• 1 × 12in USB-C to USB-C Cable
• 1 × 12in USB-C to 3 in 1
• (Lightning / Micro USB / USB-C) Cable
• 2 × Metal label sticker

| Wireless Charger Power Bank
| LMP-12
|

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>