BORMANN Elite BFJ2000 Juicer User Manual
- June 10, 2024
- BORMANN Elite
Table of Contents
BORMANN Elite BFJ2000 Juicer
Product Information
The BFJ2000 is a manual juicer that operates using a lever principle to extract juice from soft and juicy fruits such as pomegranate and citrus. It has a stainless steel strainer that is safe for health and a heavy-duty extra wide cast iron base with silicon suction feet for steady operation. The user- friendly soft handle ensures ease of use, and the stainless steel bowl can be removed for easy cleaning. The dimensions of the juicer are 10.82”(L) 7.09”(W) 15.35”(H) and it has a net weight of around 6.2kg.
Product Usage Instructions
- Place the juicer on a flat surface.
- Prepare the fruit by cutting it into manageable pieces.
- Remove the stainless steel bowl from the juicer.
- Place the fruit on the strainer and press down on the lever to extract the juice.
- Repeat steps 3 and 4 until all the desired juice has been extracted.
- Clean the juicer after use by removing any leftover fruit and washing it with soap and water.
Product Maintenance
The steel bar of the juicer is lubricated to achieve smooth operation. All repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Product Technical Data
-
Model: BFJ2000
-
Net weight: 6.2kg
-
Dimensions: 27x17x39cm
-
Diameter of filter screen: 12cm
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Safety instructions
- Before using this juicer, please read this manual thoroughly and carefully. Please keep this manual in a safe place after reading for future reference.
- Never place finger inside or near the strainer when pressing down the handle as finger pinching can occur!
- To avoid possible injury, please return the handle to the down position after using!
Main features
- The Juicer is a manual type product based on lever principle for juicing soft and juicy fruits like pomegranate/citrus etc.
- Dimensions: 10.82’’(L) 7.09’’(W) 15.35’’(H).
- Net Weight: around 6.2kg.
- Stainless steel strainer, safe for health.
- Heavy-duty extra wide cast iron base with silicon suction feet, steady operation.
- User friendly soft handle.
- Stainless steel bowl can be removed to clean easily.
Operating instructions
- The product has been assembled when delivered. Clean the juicer and the stainless steel bowl before using to clear might have dust in manufacturing and transportation.
- Place juicer on a horizontal and steady surface.
- Place a container (cup/glass) directly below the drain spout to collect juice.
- Slice fruits in half or crosswise depends on the size of the fruit.
- Raise the handle to the most upright position and place half or quarter of the fruits on the strainer.
- Lower the handle to begin the squeezing process.
- Repeat step 5 and 6 to squeeze the remaining fruits.
- Remove residue & clean the juicer after use.
Maintenance
- Remove the strainer and basket from the juicer by pulling up on basket. Clean them using hot soapy water, then rinse and dry thoroughly. These parts are dishwasher safe.
- Wipe the juicer using hot soapy water, then rinse and dry thoroughly. For optimal performance the juicer and its parts should be cleaned after each use.
- Lubricate the main vertical shaft and lever joint periodically to prevent stiffening. Regular cooking or vegetable oil may be used.
- If the screw is loose, tighten it with a wrench to make the juicer work properly
Technical Data
-
Model: BFJ2000
-
Net weight: 6.2KG
-
Dimensions: 27x17x39cm
-
Diameter of filter screen: 12 cm
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
-
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
-
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.