BORMANN ELITE BFN5615 Air cooler Instruction Manual

: August 6, 2024
: BORMANN Elite

Table of Contents

BORMANN ELITE BFN5615 Air cooler
Product Usage Instructions
FAQ
SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
KEY CONTROL FUNCTION
PRECAUTIONS FOR USE
MAINTENANCE
WARRAΝΤΥ
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BORMANN ELITE BFN5615 Air cooler

Technical Specifications

Model: BFN5615
Power: 65 W
Tank Capacity: 6 Lt
Speed Choices: 3
Timer: 0-12 h Automatic
Other features: Horizontal Swing, LED light touch screen, Remote control

Product Usage Instructions

Safety Instructions

Read the manual carefully before use. Failure to follow the warnings and instructions may result in tool damage, physical injury, and/or property damage.
Store the manual in a safe place for future reference.
To reduce the risk of fire, electrical shock, or injury to a person, follow these guidelines.
Operate the appliance in a well-ventilated area.
Avoid operating the appliance with a damaged cord or plug.
Maintain a distance of no less than 20cm from walls or corners to ensure proper air intake and exhaust.
Do not insert fingers or objects into the grill while in use.
Add clean water within the specified limits indicated by the water level indicator.
Do not move the product with water in the tank. If necessary, unplug it, and drain the unit carefully.
Keep the ice crystal box away from children as it contains harmful substances.

Key Control Function

POWER: Touch POWER to turn the product on or off.

Precautions for Use

Unscrew the set screw and pull out the dust-proof bracket.
Take up the honeycomb filter outside.

FAQ

Q: Can I use the product with a damaged cord?

A: No, do not operate the appliance with a damaged cord or plug to avoid hazards.

Q: How should I clean the product?

A: Follow the cleaning instructions provided in the manual to ensure proper maintenance.

SAFETY INSTRUCTIONS

Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in tool damage, physical injury, and/or property damage. Store the manual in a safe place for future reference.
WARNING: To reduce the risk of fire, electrical shock, or injury to a person.
The product is for household use only.
Connect the appliance to a single-phase AC supply of the voltage specified on the rating label.
Always turn the product to the OFF position and unplug it from the electrical outlet when not in use.
Extreme caution is necessary when the appliance is used by or near children, invalids, or elderly persons.
Do not run the cable under carpets and do not cover the cable with carpets, rugs, walkways, or anything similar. Place the cable away from a moving area where no one will trip over it.
Do not operate the appliance with a damaged cord or plug, or after the unit malfunctions, has been dropped, or is damaged in any manner.
If the supply cord is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person to avoid a hazard.
Use the appliance in a well-ventilated area. While using, a distance of no less than 20cm should be kept away from the wall or corner to ensure the air intakes or exhaust openings should not be blocked unexpectedly.
The unit must not be located immediately below or beside a curtain or anything similar.
Do not insert or allow fingers or any other objects into the grill to avoid mechanical danger when in use. Do not block air intakes or exhaust openings in any manner.
Adequate clean water should be put into the tank within the water level limits as shown by the water level indicator. Make sure that you DO NOT add water whilst the power is on.
If you want to move the product whilst water is in the tank, unplug it and push it slowly and very lightly on the side of the unit to avoid water spillage. The best method would be to drain the unit using the valve at the bottom of the unit.
Keep the ice crystals box provided away from children, as it is a chemical-based substance that is harmful if swallowed.
Also, make sure that the ice pack is not placed in direct sunshine. The ice crystal can be used for over 5 years. When scrapping the appliance, follow the regulations concerning the disposal of ice crystals.
Use the appliance on flat, dry floor only.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Technical data

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products.
The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death.
The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

KEY CONTROL FUNCTION

SPEED: When the product is in operation, touch “SPEED”, the wind speed works as low wind speed – medium wind speed and high wind speed.
MODE: When the product is working, touch “MODE” one time or more times, NORMAL WIND MODE/NATURAL WIND MODE/SLEEP WIND MODE for choose.
COLD: When the product is working, touch “COLD”, the cool function starts work and an indicator light will light up.
SWING: When the product is working, touch “SWING” one time or more times, automatic horizontal swing will start or stop, corresponding indicator light will be on or off.
When the product is working, touch” TIMER” one time or more times, the timer will be cycled as follows.
POWER: Touch “POWER” to on or off the product.

PRECAUTIONS FOR USE

When using the device, make sure it is on a flat and stable surface. Damage may occur if it is placed on a slope or incline. If you need more cooling, add ice to the top side.
- Note: The ice tray should be kept out of the reach of children to prevent ingestion.
Insert the plug directly into a standard AC outlet. Make sure the plug fits snugly into the outlet.
Cold function

Note: do not use this function without water to avoid damage to components.

Press the Cold function, the water pump starts to work, the air will be cooler and more humid.
Before operating the unit in Cold mode, make sure the escape valve for the water tank is properly fixed. Then proceed to add clean water to the water tank.
When adding water, be sure to monitor the water level indicator to make sure you have not OVER or UNDER-watered the unit.
Press the Cold button after adding the water and the unit will begin to circulate cooler air. When you press the Cold button again, it will stop working.
If you find that the air after step 1) is still not cool enough, you can add more ice to the water tank directly by opening the water tank cover.
Be careful not to exceed the capacity of the ice box, otherwise damage to the unit or electric shock may occur.
If you wish to use an ice pack instead of a block of ice, simply place it directly into the water tank by opening the water tank cover.
Cooling performance will be good if you place it in your refrigerator and let the ice pack freeze for 1 to 2 hours.
Open the valve and you can pour all the water out, then replace the water.
How to knock down the dust-proof bracket and honeycomb filter. Before doing it, keep turning off the machine and remove the plug from the socket outlet.

Unscrew the set screw and pull out the dust-proof bracket
Take up the honeycomb filter outside

MAINTENANCE

Always remove the plug from the socket outlet and allow the fan blower to stop acting before cleaning it.
Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
- WARNING:
- Do not immerse the unit in water.
- Do not use any cleaning chemicals such as detergents and abrasives.
- Do not allow the interior (special for the PCB) to get wet as this could create a hazard.
After extended periods of use, be sure to replace the water in the tank with fresh clean water at least weekly. Also, remember to clean the filter by unscrewing the filter and removing the filter cradle. It should be cleaned in a mild soapy solution and then left to dry before replacing the filter.
When the unit is not in use, make sure that it is unplugged from the wall socket, water is drained thoroughly and it is placed back into its original box for storage until later use.
In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire hazard or electric shock.

ENVIRONMENTAL DISPOSAL

To avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of recyclable materials and can be disposed of accordingly.
The tool’s plastic components are marked according to their material, which makes it possible to be environmentally friendly and differentiated because of available collection facilities.

Only for EU countries

Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation under national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
WWW.NIKOLAOUTOOLS.COM

WARRAΝΤΥ

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use, and 12 months for chargers and batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chokes, etc.).
Tools damaged as a result of non-compliance with the instructions of the manufacturer.
Tools poorly maintained.
Use of improper lubricants or accessories.
Tools are given to third entities free of charge.
Damage due to an electrical connection at a voltage other than that indicated on the ap-pliance plate.
Connection to a non-earthed power supply.
Change in current voltage.
Damage resulting from the use of salty water (e.g., washing machines, pumps).
Damage or malfunction resulting from improper cleaning procedure of the tool.
Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
Tools that have been modified or opened by unauthorized personnel.
Tools used for rent.

The warranty covers only the free-of-charge replacement of the component that presents a manufacturing defect or material failure.
In case of a lack of a specific spare part, the company reserves the right to replace the tool with another corresponding model.
After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed.
Replacement of a spare part with a repair charge is covered by a 1-year warranty of good operation, subject to compliance with the warranty terms.
The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply.
Greek law and relative regulations apply to this warranty.
The instructions manual is also available in digital format on our website
www.nikolaoutools.com.
Find it by entering the product code in the Search field.