rizoma AZ453 Upper and Backward Risers User Manual
- June 3, 2024
- rizoma
Table of Contents
AZ453 Upper and Backward Risers
User Manual
AZ453 Upper and Backward Risers
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or
theircomponents, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before.For your safety Rizomasuggests to
always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Raised and swept-back risers Consult the website
www.rizoma.com, click on the AZ453 page the section
“MEDIA”, to download the TUV approval document in PDF format.
After
installation, completely turn handlebars from left to right and back again,
several times. Make sure the handlebars move freely and without obstruction.
Check all the throttle, brake and clutch cables, hydraulic lines and
electrical wires to make sure they are not limiting the movement of the
handlebars, and that they are not binding or becoming kinked or caught in
anything. Make sure that all components of your motorcycle continue to
function properly. Improper handlebar riser installation could lead to
throttle, brake or clutch malfunction and loss of motorcycle control,
resulting in an accident, personal injury or death. Be sure that the nominal
diameters of your handlebar risers and handlebars at the clamping point are
the same. Do not force the handlebars and risers together. The handlebars and
risers should rest together easily and at the clamping point, without any
play. If you have any doubt whatsoever, please see your authorized RIZOMA
dealer. Failure to properly match the diameters of the handlebar risers and
handlebars and clamps could cause the handlebars to fracture, resulting in
loss of motorcycle control, an accident, personal injury or death.
|
---|---
DIFFICULTY LEVEL| Medium
TIME OF ASSEMBLAGE| 30-40 min
REMOVE THE ORIGINAL SCREWS AND THE RISER
WARNING: MAKE SURE THAT YOUR MOTORBIKE IS STANDING FIRMLY BEFORE YOU
START WORK, AS A FALL MAY LEAD TO DAMAGE TO THE MOTORBIKE OR INJURY TO YOU OR
OTHERS.
INSTALL RISER
WARNING: FOR THE TIGHTENING TORQUE OF ORIGINAL SCREWS CONSULT THE
HANDBOOK OF MANUFACTURER.
INSTALL HANDLEBAR
**ATTENTION: LUBRICATE THE UNDER HEAD AND THE THREADS OF THE SCREWS
WITH GREASE.
WARNING: DO NOT FORCE THE HANDLEBARS AND RISERS TOGETHER. THE HANDLEBARS
AND RISERS SHOULD REST TOGETHER EASILY AND AT THE CLAMPING POINT, WITHOUT ANY
PLAY. FAILURE TO PROPERLY MATCH THE DIAMETERS OF THE HANDLEBARS AND RISERS AND
CLAMPS COULD CAUSE DAMAGE AT HANDLEBAR OR RISERS.
INSTALL CLAMP
ATTENTION: LUBRICATE THE UNDER HEAD AND THE
THREADS OF THE SCREWS WITH GREASE.
WARNING: FOR THE CORRECT INSTALLTION OF THE ORIGINAL CLAMP TIGHTEN BEFORE
THE M10 SCREWS AFTER THE M8 SCREWS.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
** Some of our products may not be approved for road circulation in the
countries where homologation is required. Thus RIZOMA® srl declines any
responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>