NEC MultiSync M Series Option Board Instruction Manual
- June 3, 2024
- NEC
Table of Contents
NEC MultiSync M Series Option Board
This manual describes the Option Board installation procedure for installers. Please check the User’s Manual before installing the Option Board for additional information.
Installing an Option Board
You can install Option Boards that are compatible with Intel® Smart Display Module Small (Intel® SDM-S) and Intel® Smart Display Module Large (Intel® SDM-L) specifications.
-
Turn off the main power switch.
-
If signal cables or the power cord is connected to the monitor, please disconnect them.
-
Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor.
NOTE : To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can damage the monitor. -
Intel® SDM-S: Remove SLOT COVER Raspberry Pi Compute Module : Remove SLOT COVER
Intel® SDM-L:
Remove SLOT COVER a and b (Figure 1). Slide the CENTER RAIL to the right and remove it. Reverse the process to reattach it
-
Insert the Option Board into the monitor and affix it in place with the removed screws used for slot cover (Figure 2). (Recommended fasten force: 50~80 Ncm).
NOTE:
Unless your monitor is purchased as part of a special bundle package, no
Option Boards will be in the box or installed in the monitor. These are
optional accessories available for separate purchase. Please contact your
supplier for a list of Option Boards available for your monitor.
Make sure the board is inserted into the slot in the correct orientation. Do
not apply excessive force to manipulate the Option Board before attaching it
with screws.
WARNING: Ensure the Option Board is securely fastened using the original screws to prevent the OPTION from falling out the product. A falling Option Board may expose you to danger.
For installation videos, please visit our website
Raspberry Pi Compute Module
Intel® Smart Display Module Large MultiSync is a trademark or registered
trademark of NEC Display Solutions, Ltd. in Japan and other countries. Intel
and the Intel logo are trademarks of Intel Corporation or its subsidiaries.
All other brands and product names are trademarks or registered trademarks of
their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>