LASER LSH-FLCAM-1 Floodlight Camera User Manual
- June 3, 2024
- Laser
Table of Contents
- WHAT’S IN THE BOX
- SPECIFICATIONS
- PRODUCT DIAGRAM
- Reset Button Controls
- Getting Started with the App
- Connecting to the App
- Camera Controls
- Camera Controls continued…
- Micro SD Card & Motion Detection
- Adding Laser SmartHome to the Google Home App
- TROUBLESHOOTING
- TROUBLESHOOTING continued…
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LASER LSH-FLCAM-1 Floodlight Camera User Manual
Thank you for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:
WHAT’S IN THE BOX
- Floodlight Camera
- Mounting Bracket
- USB Cable
- Wall Mount Screw Set
- User Manual
SPECIFICATIONS
Image Sensor: | 1/3” Color CMOS |
---|---|
Display Resolution: | 1920x1080p @ 15 frames per second |
Focal Length: | 2.8mm |
Viewing Angle: | 120o |
LED: | 6pcs 850nm LED, IR distance up to 8m |
Spotlight: | 400 LUX |
Image Compression: | H.264 |
DNR: | 3D Digital noise reduction |
WDR: | Digital wide dynamic range |
Audio: | Built-in Microphone & Speaker |
Audio Compression: | PCM |
Wireless: | 802.11b/g/n |
Wireless Security: | WPA/WPA2,WPA-PSK/WPA2-PSK |
Remote Access: | Peer to Peer |
Motion Detection: | PIR motion detection 8m |
Storage: | Micro SD Card up to 128GB (not included) |
Battery: | Built-in 4pcs 18650 battery 10400mAh |
Charging power: | DC5V 2A |
IP Rating: | IP65 |
PRODUCT DIAGRAM
Reset Button Controls
-
Press and hold for 10 seconds to reset
the camera. -
A RED LED indicator light will start flashing.
There are 2 flashing states:
Note: In this manual we cover the QR pairing mode instructions.
Getting Started with the App
-
Install the Laser SmartHome App for your Smartphone from the iOS App Store or Google.
-
Log in with an existing Laser SmartHome account or create a new account.
Connecting to the App
-
Press and hold the “RESET” button on the Floodlight Camera till you get a fast-flashing RED light.
-
Open the Laser SmartHome App and tap the “+” icon to add a device.
Connecting to the App continued…
-
Select the “Camera & Lock” category on the left, then select “Smart Camera (Wi-Fi)”.
-
Enter your Wi-Fi details.
Connecting to the App continued…
- . On the next screen tap the option in the top right and select “QR Code”.
- Select the checkbox, then tap Next.
Connecting to the App continued…
-
On the next screen you will need to hold the QR Code on the App towards the camera lens on the Floodlight Camera. A tone will be heard when done correctly. Tap “I Heard a Prompt” to continue.
Tip: Move the QR code on the phone away, then towards the camera lens a few times so that it can detect it properly. -
Wait for network pairing to complete.
Connecting to the App continued..
- When finished pairing tap “Done”, then the device will appear on the Laser SmartHome App home screen.
NOTE: If you are unable to pair successfully with the Floodlight Camera, please check your Wi-Fi password and make sure you are only using a 2.4GHz Wi- Fi connection. 5GHz connections are not supported.
Camera Controls
Camera Controls continued…
Micro SD Card & Motion Detection
- A Micro SD Card installed in the camera will allow your camera to automatically take a video when motion is detected (PIR Motion Detection must be turned on).
- Without a Micro SD Card, your camera will only take photos when motion is detected (PIR Motion Detection must be turned on).
Adding Laser SmartHome to the Google Home App
- Open the Google Home App.
- In the “Google Home” main screen, select the “+” icon to set up device.
Adding Laser SmartHome to the Google Home App continued…
- Select “Set up device” to add new device, then select “Works with Google”.
Adding Laser SmartHome to the Google Home App continued…
- A list will appear showing actions and a search function to access more apps: from here, search for the Laser SmartHome App.
Adding Laser SmartHome to the Google Home App continued…
- Log into your Laser SmartHome account with your email address.
- Once linked, it will show the devices linked to your account: you can assign them to rooms. You will be prompted to authorize apps to sync.
- Click “Done” and then it will give you a list of commands available.
- When successfully linked, you will see the Floodlight Camera on your “Home Control” screen.
TROUBLESHOOTING
The Floodlight Camera video feed is not loading.
- Make sure your smartphone and the Floodlight Camera are connected to the same Wi-Fi connection.
- Check the distance between the Floodlight Camera and your Wi-Fi router. Any obstructions such as walls and ceilings will reduce the range of your Wi-Fi signal.
- Remove the Floodlight Camera from its location and bring to the same room as the Wi-Fi router. Allow approx. 5 minutes then check the video feed again. If the video feed loads, then your camera placement may be too far from your Wi-Fi router and an access point may be required to bridge the gap. Alternatively find another location for the Floodlight Camera or Wi-Fi router (if possible).
TROUBLESHOOTING continued…
I am unable to connect the Floodlight Camera to the Laser SmartHome App.
- Check the Floodlight Camera has a fast-flashing RED light. If the light is flashing slowly, press and hold the “Reset” button for 10 seconds to switch to a fast-flashing RED light.
- Check you are only connecting to a 2.4GHz Wi-Fi network. 5GHz networks are not supported.
- Check the Wi-Fi password you are using is correct. If unsure, try connecting another device to the same Wi-Fi network using that password. If that device fails to connect also then you may be using an incorrect password.
- When scanning the QR code move the QR code on the phone away, then towards the camera lens a few times so that it can detect it properly. If a tone is not heard from the Floodlight camera then the QR code has not been detected.
TROUBLESHOOTING continued…
Can I use Laser SmartHome on my computer?
- The Laser SmartHome App is only designed to work on Smartphones and Tablets that use the Apple App store and the Google Play Store.
Visit our website
www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>