aqua Laser 314841728959 Spot Cleaner Instruction Manual

May 15, 2024
aqua LASER

aqua Laser 314841728959 Spot Cleaner

aqua-Laser-314841728959-Spot-Cleaner-product

Specifications

  • Handle: Ergonomic design for comfortable grip
  • Clean water tank capacity: [Specify capacity]
  • Dirty water tank capacity: [Specify capacity]
  • Power cable length: [Specify length]
  • Self-cleaning brush included

FAQ

  • Q: How often should I clean the dirty water tank?
  • A: It is recommended to clean the dirty water tank regularly to ensure optimal performance. If the tank is full or if the suction is weak, clean it immediately.
  • Q: What should I do if there is no suction or water intake?
  • A: Check for blocks and clear them promptly. Ensure that the machine is functioning under suitable environmental conditions.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
Unplug from the outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY

  • Children should be supervised to ensure that they do not play with the appliance.

  • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts of the appliance and its accessories.

  • Unplug from the electrical socket when not in use, before cleaning, maintaining or servicing the appliance, and if your appliance has an accessory tool with a moving brush, before connecting or disconnecting the tool.

  • If the supply cable is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.

  • Do not pull or carry by cable, use the cable as a handle, close the door on the cable, or pull the cable around sharp edges.

  • Do not use with damaged cable or plug.

  • Do not run the appliance over cable.

  • Do not leave the appliance when plugged in.

  • Keep the cable away from heated surfaces.

  • To unplug, grasp the plug, not the cable.

  • Do not handle plugs or appliances with wet hands.

  • Turn off all controls before unplugging.

  • Plastic film can be dangerous. To avoid the danger of suffocation, keep away from children.

  • Use only as described in this user guide.

  • Use only the manufacturer’s recommended attachments.

  • Do not immerse in water or liquid.

  • If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and have it repaired at an authorized service centre.

  • Do not put any objects into openings.

  • Do not use any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

  • Use extra care when cleaning on stairs.

  • Do not use them to pick up flammable or combustible liquids, such as petroleum, or use in areas where they may
    be present.

  • Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.)

  • Do not use appliances in an enclosed space filled with vapours given off by oil-based paint, paint thinner, some mothproofing substances, flammable dust, or other explosive or toxic vapours.

  • Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

  • Keep the appliance on a level surface.

  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

  • Do not be exposed to rain. Store indoors.

  • Always connect to a properly earthed electrical socket. Do not modify the earthed plug.

  • Liquid must not be directed towards equipment containing electrical components.

  • Use only the type and amount of liquids specified under the operations section of this guide.

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be done by children without supervision.

  • This product is used to remove dirt by scrubbing. The water tank should not be filled with tap water of more than 40 degrees.

  • Do not use this product on sensitive surfaces like silk, fur, leather, soft clothing, solid wood, lacquered wood products, lacquerware etc. Or on other easily scratched surfaces (floor, tabletop, etc.)

  • Indoor use only.

  • Do not sit or lean on this product.

  • When using detergent, please test the detergent on an invisible part.

Product Description

aqua-Laser-314841728959-Spot-Cleaner-fig-1

1. Handle 2| 2. Clean water tank handles| 3. Clean water tank| 4. Dirty water tank handle
---|---|---|---
5. Dirty water tank 6| 6. Power switch| 7. Hose| 8. Cleaning brush
9. Power cable| 10. Hanging hoke power

cable

| 11. Water spray switch

button

| 12. Wide cleaning brush
 | 13. Self-cleaning brush|

Adding water to the clean water tank

  • Disassembly method of clean water tank.
  • Pull up the clean water tank obliquely to remove the tank as a whole. Remove the clean water tank, open the water tank cover and add water.

aqua-Laser-314841728959-Spot-Cleaner-fig-2

Instructions

To avoid blocking the air duct, please clean up large pieces of garbage in the area, such as large pieces of paper, packaging film, etc. The cleaning range of this machine is soft surfaces, like carpets or furniture. Always check if the fabric can be wet/cleaned with a device like this. It is not recommended to use it on hard surfaces.
Before using this product, put the machine on a flat ground and plug in the power supply first.

  1. Press the “power switch” to start the machine; Press the “power switch” again to turn off the machine.
  2. Hold the cleaning brush, press and hold the “water spray switch button” at the bottom of the cleaning brush, and the cleaning brush will continue to spray water. Release the button and the water spray stops.
  3. Spray water on the stained area on the surface. Wipe it repeatedly with a cleaning brush after spraying. Suck the stain and wastewater into the waste water tank, and do it repeatedly several times to quickly clean the stain.
  4. This product can be used with a non-foaming cleaning solution, which can be mixed with water and poured into the clean water tank for a better cleaning effect.

Notice: when using this product, it is necessary to spray water first and then absorb water. It is not possible to directly suck up dry garbage.

Brush replacement
Wide Cleaning Brush: for glass cleaning and a large area of stain cleaning (12).
Self-cleaning brush: Self-cleaning the internal pipes of the product after the cleaning is finished(13). Remove the cleaning brush as shown and replace it with a wide or self-cleaning brush.

aqua-Laser-314841728959-Spot-Cleaner-fig-3

Cleaning instructions

Brush

When the brush (8 or 12) is entangled by hair or blocked by dirt, please clean and maintain it in time.

  1. When the brush is entangled with hair, remove the hair or dirt on the bristles.
  2. When the brush is blocked, please remove the transparent cover on top of the brush, and use a long narrow tool to clean the air duct inside the cleaning brush handle.

Hose
After placing the self-cleaning brush, press the “power switch”, and keep pressing the “water spray switch button” to clean the internal pipes of the product.

Dirty water tank
To maintain the performance of the product, please clean the waste water tank regularly. If there is more wastewater in the dirty water tank, the suction of this product will be weakened.
If the water level reaches the maximum water level, the waste water tank should be cleaned in time. After the waste water tank is removed from the unit, the wastewater and garbage shall be poured out and the tank must be cleaned.
Disassemble dirty water tank: Pull up the dirty water tank obliquely to remove the dirty water tank as a whole, remove the tank cover, open the cover and clean the waste water tank.

Tip: it is recommended to carry out the above cleaning work after each use of this product.

aqua-Laser-314841728959-Spot-Cleaner-fig-5

Power cord and hose storage

  1. The power cord of this product is long. After the product is used, the power cord can be wound on the wire hook on the back of the machine.
  2. After the product is used, the hose can be wound in the storage slot at the bottom of the machine.

TROUBLESHOOTING

If any abnormality is found during use, please refer to the following table

Problem Cause Solution
The product does not spray water 1.  Nozzle blockage

2.  water shortage in clean water tank

| 1.  Remove the nozzle blockage with a fine needle

2.  Add water to the clean water tank in time

Abnormal noise| 1.  The suction port of the product is blocked or large waste is inhaled

2.  Motor failure

| 1.  Clear blockages in time

2.  Contact the supplier

Weak suction or no water absorption| 1.  Too much wastewater in the waste water tank

2.  Dirt blocking the suction

| 1.  Clean the waste water tank in time

2.  Clear blockages in time

Abnormal or inoperative machine| The ambient temperature is too high or too low| Keep the machine at a suitable ambient temperature (0℃-50℃)

Correct Disposal of this product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

aqua LASER User Manuals

Related Manuals