GARDEN OF EDEN 11224B LED Solar Fountain – White Waterlily 180 x 170 mm Instructions
- June 6, 2024
- GARDEN OF EDEN
Table of Contents
11224B LED Solar Fountain – White Waterlily 180 x 170 mm
GARDEN OF EDEN
Solar fountain
Specifications:
Size: 180 x 170 x 35 mm
Solar panel: 7V/1.4 W
Water pump performance: DC 4,5V – 12V/0,5-5 W
Water column size: up to 50 cm
Water flow: 100-350l/h
Lifespan: >20.000 hours
Operating Temperature: +5 -(+50°C)
Weight: ~180g
Color: black
Startup:
-
To avoid vibration, make sure the pump is securely attached to the bottom of
the fountain. Place the nozzle that suits you on the device, connect the solar
unit, and place to the dry, sunny area using the waterproof connector. -
Place the water pump completely in the water, keeping the nozzle above the water surface.
-
If the solar panel of the fountain is exposed to sunshine, the water pump will start. The more intense the sun, the more energy the solar panels produce to power the water pump, creating a larger jet.
Warning
-
Make sure the fountain is always in the right amount of water! It is especially
important on summer, warm, sunny days when more water evaporates! -
If there is not enough water in the water pump, it can easily be damaged!
-
Always keep the water pump below the water surface when removing the appliance from the water, taking care not to expose the solar panels to sunlight, as the pump can be easily damaged!
-
Frequent water change is recommended to keep the water clean! Any dirt can clog the water pump and prevent proper operation.
-
To ensure that the appliance works properly, make sure that the solar panels do not fall below the water surface.
-
If you experience dirt or loss of performance, it is recommended to wipe the surface of the solar panels with a damp, soft cloth. Do not use any chemicals during cleaning as it may damage the surface of the fountain.
-
The device cannot be used in winter temperatures around freezing because the viscosity of the water changes.