Weceleh WE-T018B Commercial Induction Cooktop User Manual

: June 15, 2024
: Weceleh

Table of Contents

Weceleh WE-T018B Commercial Induction Cooktop
IMPORTANT SAFEGUARDS
HOW TO USE
SPECIFICATION
INDUCTION COMPATIBLE COOKWARE
CLEANING & MAINTENANCE
TROUBLESHOOTING
WARRANTY AND SERVICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Weceleh WE-T018B Commercial Induction Cooktop

IMPORTANT SAFEGUARDS

SAVE AND READ THESE INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING.

Read all instructions before operating.
Check the voltage on the rating plate to make sure it matches the voltage supply in your home before plugging this appliance in.
Always use this appliance on a dry, level, sturdy surface. Do not use on a fabric or vinyl-covered surface or any surface that is adversely affected by heat. For buffet or tabletop use, exercise care to avoid damage to a furniture finish. Do not use on tablecloth or carpet.
To protect against electrical shock, do not immerse the cord, plug, or appliance in water or other liquid.
Children should not be allowed to operate this appliance. Close supervision is necessary when this appliance is used around children.
Unplug from the outlet when not in use and also before cleaning. Allow to cool before putting on or taking off parts.
Never attempt to disassemble or repair the induction burner yourself.
Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been damaged in any manner. Contact our customer service department for examination, repair or adjustment.
Do not use outdoors.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
This appliance is for household use only.
Do not use this appliance for other than intended use.
Do not place on or near a hot stove or in a heated oven.
Do not place on or near wet areas or surfaces.
Do not move the unit when the cookware is placed on top of it.
Do not place any empty cookware on the induction burner while it is functioning. An empty piece of cookware will heat up very rapidly and can cause material damage or personal injury.
Do not place metal objects such as knives, forks, spoons, lids, cans, and aluminum foil on the top plate as they can get hot and ruin the cooktop.
Keep a minimum of 4 inches of space around the burner on all sides.
Do not place paper or anything else between the cookware and the unit, except for specifically designed interface disks for induction burners.
If the temperature-resistant glass is cracked or damaged, please switch off the appliance immediately and contact our customer service department.
Do not block the air inlet or outlet vent.
Do not touch the top plate right after removing the cookware, as the top plate will still be very hot.
Do not place the appliance near objects that may be affected by magnets, such as radios, televisions, credit cards or audio/video tapes.
The use of accessories not recommended by the appliance manufacturer may cause injuries.
Do not touch hot surfaces.
Never move an appliance containing hot oil or other hot liquids.
To disconnect the appliance, set the appliance to “off”, then remove the plug from the wall outlet.
To reduce the risk of fire, do not place any heating or cooking appliance beneath the induction burner, and do not mount the unit over or near any portion of a heating or cooking appliance.
To reduce the risk of electric shock, do not mount over a sink.
To avoid damage or possible malfunction of the induction burner, do not exceed a combined total of food and the cookware to exceed 9 pounds.
During use, a high-frequency noise may be heard due to the magnetic heating of the pan. It is not a malfunction. If you move the pan slightly, and very carefully, the noise will stop.
During use, the fan will cycle on and off to ensure that the induction burner does not overheat.
Do not cook on a broken cooktop – if the cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock.
Clean cooktop with caution – if a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

Weceleh-WE-T018B-Commercial-Induction-Cooktop-FIG-1

Knob
Press it to turn on/off the cooker. Rotate it to adjust the temp./power/timer.
Timer/Preset Button
Used to set the time.
Watt/Temp. Selection Button
Used to select watt or temperature heating.
LED Screen
Used to display watt/temp./time.
Boil Button
Used to enter the max power heating directly.
Simmer Button
Used to simmer food.
Pause Button
Used to pause and return the heating.
Timer/Preset LED
Watt/Temp. Selection LED
- Boil LED
- Simmer LED
- Pause LED
- Heating Zone
  Place the pan or pot on the heating zone.

HOW TO USE

Power Supply
- a. Upon connecting the device to a power supply, a ‘Beep’ buzzer sound will be heard as well and all LEDs and Nixie tubes will flash for approximately ‘l’ second and fade out. The LED screen will display
  ‘OFF’ and the device will now enter the ‘Power-On mode’.
Power On & Operation
- a. In the Power-On mode, press the knob and the LED screen will display ‘ON’. The device now enters the standby mode’.
- b. During Standby mode, press the buttons to select the reference function.
- 3. Shutdown
- a. Press the knob during device standby or operation mode.
  Your device will stop operating and enter power-on mode.
Timer
- a. Timer is available for temperature heating function, watt heating function & boil function. The simmer function is not available.
- b. Time range from 1 min to 3 hours.
- c. During the above heating functions, press the timer/preset button, the timer/preset LED will light up and the LED screen will display ‘0:30’ (the default time is 30 min). Turn the knob to adjust the time. Press the timer/preset button again to confirm the setting or it will be confirmed automatically after 5 seconds.
- d. Press and hold the timer/preset button for 2 seconds to cancel the function.
- e. During timer mode, the LED screen will display the remaining time and watt/temperature alternately every 5 seconds.
- f. When the time expires, the device will return to power-on mode.
Preset
- a. Preset is available for the simmer function. Temperature heating function, watt heating function & boil function are not available.
- b. Time range from 1 min to 24 hours.
- c. During standby mode, press the timer/preset button, the timer/ preset LED will light up and the LED screen will display ‘0:30’ (the default time is 30 min). Turn the knob to adjust the time.
  Then press the simmer button, and the simmer LED will light up.
- d. Press the knob to cancel the function.
- e. During preset mode, the LED screen will display the remaining time.
- f. When the time expires, the device will enter the simmer function.
Watt Heating Function
- a. During standby mode, press the watt/temp. selection button to select watt heating, the watt/temp. LED will light up and the LED screen will display ‘1200’ (the default heating watt is 1200W).
- b. Turn the knob to adjust the watt.
Temp. Heating Function
- a. During standby mode, press the watt/temp. selection button to select temp. heating, the watt/temp. LED will light up and the LED screen will display ‘356F’ (the default heating temp. is 356° F).
- b. Turn the knob to adjust the temp ..
Boil Function
- a. During standby mode, press the boil button, the boil LED will light up and the LED screen will display ‘1800’ (the default heating watt is 1800W).
- b. Turn the knob to adjust the watt.
Simmer Function
- a. During standby mode, press the simmer button, the simmer LED will light up and the LED screen will display ‘AUTO’ (the heating temp. is 140° F).
- b. Temperature adjustment is not available (You could not turn the knob to adjust the temp.)
Pause Function
- a. During heating, press the pause button, and the pause LED will light up. The device will stop working.
- b. During the pause function, press the pause button again, and the pause LED will disappear. The device will return to work.
Fan Continues To Work
- a. The fan will keep running for 2 minutes after you turn off the device. It is designed this way for heat dissipation.
Pot Detection Function
- a. During normal heating operation, the device will stop heating instantly when the cookware is removed. If suitable cookware is detected within 2 minutes, then normal operation will be resumed. Otherwise, the device will be shut down automatically and return to power-on status.

SPECIFICATION

Portable Induction Cooktop Model: WE-T018B 120V-60Hz, 1800W
Temperature Levels: 140 F, 248 F, 284 F, 320 F, 356 428 F’ 464 F
Watt Levels: 200W, 400W, 600W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W

INDUCTION COMPATIBLE COOKWARE

To function properly, all cookware used with the Induction Burner must have a flat bottom and be induction-compatible. If in doubt about whether your cookware is induction compatible, check with your cookware manufacturer. NOTE: Your cookware must have a flat bottom and a bottom diameter measuring between 5″ -1 o·. Do not use pots or pans with a rounded bottom or any pot or pan with a bottom measuring less than 5″.

Induction-compatible cookware:

Stainless Steel
Enameled Steel
Enameled Iron
Cast Iron

Non-Induction compatible cookware:

Aluminum
Glass
Copper
Ceramic

CLEANING & MAINTENANCE

Do not immerse the appliance, or cord, or plug in water or other liquids at any time.
Do not run water over the unit.
Unplug the appliance and let it cool down before cleaning the induction cooktop.
Do not use any scouring pads or caustic or abrasive cleaning agents. Make sure that water does not penetrate inside the induction cooktop.
Wipe off the glass cooktop and the body with a damp cloth or use a mild, non-abrasive soap solution.
To keep your cooktop looking new, make sure that the bottom of your cookware does not scrape or scratch the glass surface.
Do not place heavy objects on the heat-resistant glass cooking plate, as it is breakable.