ASHLEY B733-46 Lettner Chest of Drawers User Manual
- June 9, 2024
- Ashley
Table of Contents
ASHLEY B733-46 Lettner Chest of Drawers
IMPORTANT SAFEIY NOIICE
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order.
- Be sure to check all packing materials Carefully for small parts may have come loose inside the carton during shipment. If parts are missing, you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. glass or mirrors, as severe injury may result if the glass or mirror breaks. arge pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, light, etc.), always (1) make Sure the electrical cord is unplugged before assembly and (2) be caretul not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, d not stand on lower shelves in order to assemble upper shelves-use a step ladder.
- Do nt stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to Support the weight ot a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
PARTS
NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PECOPLE.
DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
ASSEMBLY
WARNING
The use of the included tipping restraint may reduce, but not eliminate, the
risk of furniture tip over. Follow the instructions on the plastic bag for
proper installation.
NOTE: IF THE UNIT IS PLACED ON AN UNLEVEL SURFACE, PLACE A LEVELER
UNDERNEATH ONE FOOT UNTIL THE UNIT 1S LEVEL
BREAK OFF ANY PROTRUDING SEGMENTS.
RTAParts@ashleyfurniture.com
www.ashleyfurniture.parts