Nikon NIZ5028 NIKKOR Z MC 50mm Macro Lens User Manual

Nikon NIZ5028 NIKKOR Z MC 50mm Macro Lens

Before using this product, please read these instructions carefully. You will also need to consult the camera manual.

• This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.
• Update the camera firmware to the latest version. With earlier versions, the camera may fail to detect the lens correctly and some features may not be available. The latest version of the camera firmware can be downloaded from the Nikon Download Center at the URL below.

https://downloadcenter.nikonimglib.com/

For Your Safety For Your Safety
To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.

WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION: Failure to observe the precautions marked with this icon could result in injury or property damage.

WARNING

• Do not disassemble or modify this product.
  Do not touch internal parts that become exposed as the result of a fall or other accident. Do not touch internal parts that become exposed as the result of a fall or other accident.
  Failure to observe these precautions could result in electric shock or other injury.

• Should you notice any abnormalities such as the product producing smoke, Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source. heat, or unusual odors, immediately disconnect the camera power source.
  Continued operation could result in fi re, burns or other injury.

• Keep dry. Keep dry.
  Do not handle with wet hands. Do not handle with wet hands.
  Failure to observe these precautions could result in fi re or electric shock.

• Do not use this product in the presence of fl Do not use this product in the presence of fl ammable dust or gas such as propane, gasoline or aerosols. propane, gasoline or aerosols.
  Failure to observe this precaution could result in explosion or fire.

• Do not directly view the sun or other bright light source through the lens. Do not directly view the sun or other bright light source through the lens.
  Failure to observe this precaution could result in visual impairment.

• Keep this product out of reach of children. Keep this product out of reach of children.
  Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.

• Do not handle with bare hands in locations exposed to extremely high or Do not handle with bare hands in locations exposed to extremely high or low temperatures. low temperatures.

Failure to observe this precaution could result in burns or frostbite.

CAUTION

• Do not leave the lens pointed at the sun or other strong light sources. Do not leave the lens pointed at the sun or other strong light sources.
  Light focused by the lens could cause fi re or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fi re.

• Do not leave the product where it will be exposed to extremely high temperatures, Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. for an extended period such as in an enclosed automobile or in direct sunlight.
  Failure to observe this precaution could result in fi re or product malfunction.

• Do not transport cameras or lenses with tripods or similar accessories attached. Do not transport cameras or lenses with tripods or similar accessories attached.
  Failure to observe this precaution could result in injury or product malfunction.

Notices for Customers in the U.S.A. Notices for Customers in the U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help

Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.
Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200

Notice for Customers in Canada

CAN ICES-3 B / NMB-3 B

Using the Lens

Parts of the Lens: Names and Functions

Refer to the diagram on the left edge of this sheet.

__

q Lens hood

| Lens hoods block stray light that would other- wise cause flare or ghosting. They also serve to protect the lens.| __

See B

---|---|---
__

__

w Attachment point for 46 mm filters

| An attachment point for the lens cap, lens hood, and 46 mm filters.

•  This attachment point is for use exclusively with the lens cap, lens hood, and 46 mm fil- ters, and should not be used with other ac-

cessories.

| __

__

See B

__

__

__

__

e Accessory attach- ment point

| An attachment point for SY-1-62 1 adapter rings for use with optional SB-R200 flash units and 62 mm B adapters 2 for use with optional ES-2 film digitizing adapters.

•  The accessory attachment point is for use exclusively with SY-1-62 adapter rings and 62 mm B adapters and should not be used with other accessories. Attaching filters, lens caps, or other accessories that could inter- fere with the lens as it extends could result in product malfunction or damage to the lens

caused by contact with the accessory.

| __

__

__

__

—

__

__

__

r Control ring

| Autofocus mode selected :

In autofocus mode, rotate the ring to adjust a setting such as [Focus (M/A)] or [Aperture] assigned using the camera. For more informa- tion, see the description of [Custom control assignment], [Custom controls], or [Custom controls (shooting)] in the camera manual.

| __

__

__

—

Manual focus mode selected : Rotate the ring to focus.
__

__

t Reproduction ratio indicator

| View the reproduction ratio and focus distance for close-up photography.

•  The reproduction ratio and focus distance shown by the reproduction ratio indicator are approximations only and their accuracy is not

guaranteed.

| __

__

—

y Lens mounting mark| Use when mounting the lens on the camera.| See A
u Rubber lens-mount

gasket

| —| —
i CPU contacts| Used to transfer data to and from the camera.| —
Focus-mode switch

__

| Choose a focus mode.

•  A : Autofocus

•  M : Manual focus

Note that regardless of the setting chosen, fo- cus must be adjusted manually when manual focus mode is selected using camera controls.

| __

__

—

Focus limit switch

!0

| Choose the focus distance limits for autofocus according to your goals.

•  FULL : Choose for subjects at distances any- where in the lens’s full autofocus range (0.16 m/0.53 ft to infinity).

•  0.3 m – 0.16 m : Limit autofocus to distances of 0.16 m (0.53 ft) to 0.3 m (0.98 ft). Choose this option for faster focusing when shooting close- ups or at any other time you anticipate that your subject will be no more than 0.3 m

away.

|

—

---|---|---
!1 Lens cap (front cap)| —| —
!2 Lens cap (rear cap)| —| —

1. Attaching the SB-R200 requires an SX-1 attachment ring in addition to the SY-1-62 adapter ring. For information on using the SB-R200, see the documentation provided with the flash unit.
2. For information on using the ES-2 fi lm digitizing adapter, see the documentation provided with the ES-2.

Attachment and Removal

Attaching the Lens

1. Turn the camera off , remove the body cap, and detach the rear lens cap.
2. Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body, and then rotate the lens counterclockwise until it clicks into place.
3. Turn the camera on.
   • The lens will extend automatically

Extending the Lens

• Do not place the camera on a surface with the lens pointing down. Be particularly careful not to turn the camera on while it is resting on the lens, as the lens may malfunction if it fails to extend.
• Do not hold the telescoping section or attempt to forcibly extend or retract the lens. Failure to observe these precautions could result in product malfunction.
• If the lens does not extend or freezes in place once extended, press the shutter-release button.

Removing the Lens

1. Turn the camera off.
   • The lens will retract automatically. Proceed to Step 2 after confi rming that the lens is fully retracted.
2. Press and hold the lens release button while turning the lens clockwise.

Removing the Lens While It Is Extended

The lens will not retract if removed while the camera is on. To retract the lens, turn the camera off, reattach the lens, turn the camera on, and then turn the camera off and remove the lens in the correct order.

Attaching and Removing the Lens Hood

The lens hood screws directly onto the attachment point for 46 mm filters.

• Before attaching or removing the lens hood, turn the camera off and confirm that the lens is retracted. In addition, be careful not to touch or apply excessive force to the glass part of the lens.
• To remove the hood, unscrew it from the lens.

Shooting Close-Ups

This lens can be used for close-ups, letting you get closer to your subject so that it fills more of the frame. When shooting close-ups, note the following:

• Close-ups are prone to blur caused by camera shake. We recommend that you mount the camera on a tripod and release the shutter using an optional remote cord or wireless remote controller.
• Shooting at short focus distances noticeably reduces depth of field. To increase depth of field and so increase the apparent depth of focus in front of and behind the focus point, stop the aperture down and increase exposure times.
• Be careful not to strike your subject when using the lens hood.

Adjusting Aperture

The aperture of the lens varies in a range that changes with focus distance. At a focus distance of infinity, the aperture ranges from f/2.8 to f/22, while the range at a focus distance of 0.16 m (0.53 ft) is f/5.6 to f/32. At apertures matching or close to the maximum and minimum for the lens in modes A and M, effective aperture 1 is automatically adjusted for changes in focus distance as shown. 2 For example, if an aperture of f/2.8 is selected at a focus distance of infinity, the effective aperture when the focus distance is reduced to 0.16 m (0.53 ft) will be f/5.6.

1. Due to the way the lens is constructed, the brightness of the image it projects on the image sensor varies with focus distance. The image darkens as the focus distance drops and the reproduction ratio increases. The camera consequently shows an “effective aperture” that reflects this variation in brightness.
2. Assuming an aperture step size of 1/3 EV

Choosing a Reproduction Ratio

To take pictures at a selected reproduction ratio—for example, 1:1 (life size) or 1:2 (half-life-size):

1. Slide the focus-mode switch to M.
2. Rotate the control ring until the desired reproduction ratio is selected on the reproduction ratio indicator.
   • For example, to select a reproduction ratio of 1:2, rotate the control ring until the index points to “1:2”. Do not rotate the control ring after choosing the reproduction ratio.
3. Position the camera so that the subject is in focus.
   • Move the camera forward or back until the image in the shooting display is in focus.

Reproduction Ratio

The “reproduction ratio” is the ratio of the apparent size of an object on the image sensor to its true size. If the length of the subject on the image sensor is 1 cm when the actual subject is 2 cm long, for example, the reproduction ratio is 1:2 (half life-size).

Taking Photographs

• Touching the extended portion of the lens while autofocus is in progress may interrupt the focus operation. Normal function can be restored by pressing the shutter-release button.
• The focus position may change if you turn the camera off and then on again after focusing. If you have focused on a pre-selected location while waiting for your subject to appear, we recommend that you do not turn the camera off until the picture is taken.

Cameras with AF-Assist Illuminators

The lens or lens hood may block the light from the camera AF-assist illuminator.

• For the information on using the lens with cameras that have built-in AF-assist illuminators, visit the site below.
  https://downloadcenter.nikonimglib.com/

Using the Lens on Cameras with a Built-in Flash

Using the Lens on Cameras with Built-in Flash Shadows will be visible in photos where light from the built-in fl ash is obscured by the lens or lens hood. Remove the lens hood before shooting. Note, however, that depending on the distance to the subject, and in the case of zoom lenses also on the lens focal length, shadows may appear even when the lens hood is removed.

• For information on focal lengths and subject distances at which shadows will not appear in photos taken with a built-in fl ash, visit the site below.
  https://downloadcenter.nikonimglib.com/

Precautions for Use

• Do not pick up or hold the lens or camera using only the lens caps or lens hood.
• Keep the CPU contacts clean.
• Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair.
• Replace the lens caps when the lens is not in use.
• Do not leave the lens in humid locations or in locations in which it may be exposed to moisture. Rusting of the internal mechanism can cause irreparable damage.
• Do not leave the lens next to open flames or in other extremely hot locations. Extreme heat could damage or warp the reinforced plastic exterior.
• Taking the lens from a warm to a cold environment or vice versa may cause damaging condensation inside and outside the lens. Place the lens in a sealed bag or plastic case before taking it across a temperature boundary. The lens can be taken from the bag or case once it has had time to adjust to the new temperature.
• We recommend that you place the lens in its case to protect it from scratches during transport.

Lens Care

• Removing dust is normally sufficient to clean the glass surfaces of the lens.
• When cleaning the fluorine-coated front lens element:
  • Remove fingerprints and other oily stains with a soft, clean cotton cloth or third-party lens cleaning tissue; clean from the center outwards using a circular motion.
  • To remove stubborn stains, wipe gently using a soft cloth lightly dampened with a small amount of distilled water, ethanol, or a third-party lens cleaner.
  • Drop-shaped marks may form on fluorine-coated surfaces, which are highly water and oil-repellent. Such marks can be removed with a dry cloth.
• When cleaning the rear lens element, which is not fluorine-coated:
  • Remove fingerprints and other oily stains with a soft, clean cloth or third-party lens cleaning tissue lightly dampened with a small amount of ethanol or third-party lens cleaner; clean from the center outwards using a circular motion. Be sure to clean evenly and thoroughly without leaving smears.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens element.
• Do not store with naphtha or camphor moth balls or in direct sunlight. If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust.

Accessories

Supplied Accessories

• LC-46B Lens Cap (front cap)
• LF-N1 Lens Cap (rear cap)
• HN-41 Lens Hood
• CL-C1 Lens Case

Using the Lens Case

• The case is intended to protect the lens from scratches, not from falls or other physical shocks.
• The case is not water resistant.
• The material used in the case may fade, bleed, stretch, shrink, or change color when rubbed or wet.
• Remove dust with a soft brush.
• Water and stains can be removed from the surface with a soft, dry cloth. Do not use alcohol, benzene, thinner, or other volatile chemicals.
• Do not store in locations exposed to direct sunlight or high temperatures or humidity.
• Do not use the case to clean the monitor or lens elements.
• Be careful that the lens does not fall from the case during transport.

Material: Polyester

Compatible Accessories

The lens supports the following optional accessories.

• Accessories for use with the attachment point for 46 mm filters:

  • 46 mm filters

• Accessories for use with the accessory attachment point:

  • SB-R200 wireless remote fl ash units *
  • ES-2 fi lm digitizing adapters

• The lens can be used with up to four SB-R200 fl ash units

Filters

• Use only one filter at a time.
• Before attaching or removing filters, turn the camera off and confirm that the lens is retracted.
• Remove the lens hood before attaching filters.

Incompatible Accessories

Use only supplied or compatible accessories. Using other accessories could cause product malfunction or damage the accessory or lens. Examples of accessories that cannot be used with each attachment point follow.

• Accessories that cannot be used with the attachment point for 46 mm filters:
  • Third-party step-up or step-down rings
• Accessories that cannot be used with the accessory attachment point:
  • Lens caps
  • Filters
  • AF-3 and AF-4 gel filter holders
  • Third-party step-up or step-down rings

Specifications

1 aspherical element, and a fluorine-coated front lens element)
Angle of view| •  FX format: 47°

•  DX format: 31° 30’

Focusing system| Front focusing system
Minimum focu s dist anc e| 0.16 m (0.53 ft) from focal plane
Maximum re produc- tion ratio| 1×
Diaphragm blades| 9 (rounded diaphragm opening)
Aperture range| •   At a focus distance of infinity: f/2.8 – 22

•   At a focus distance of 0.16 m (0.53 ft): f/5.6 – 32

Focu s limit switch| Two positions: FULL (∞ – 0.16 m) and 0.3 m – 0.16 m
Filter-attachment size| 46 mm (P = 0.75 mm)
D i imensions| Approx. 74.5 mm/3 in. maximum diameter × 66 mm/2.6 in.

(distance to end of lens from camera lens mount flange)

W eight| Approx. 260 g (9.2 oz )

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

ONE-YEAR LIMITED WARRANTY

THIS IS YOUR NIKON INC. (VALID INTHE CONTINENTAL UNITED STATES AND HAWAII, PUERTO RICO, AND U.S. VIRGIN ISLANDS), N\KON CANADA INC. (VALID IN ALL CANADIAN PROVINCES AND TERRITORIES) OR NIKON MEXICO, S.A. DE C.V. (VALID IN ALL MEXICAN..STATESHEACH INDIVIDUALLY, AS THE CASE MAY BE, “NIKON”) ONE YEAR LIMITED WARRANTY FOR NEW NIKON CAMERAS, LENSES, SPEEDLIGHTs AND ANY NIKON HARDWARE ITEMS INCLUDED IN THE ACTUAL PRODUCT BOX WITH ANY OF THE FOREGOING (EACH, A “PRODUCT”). Y6u MUST PRESENT THIS WARRANTY FORM TOGETHER WITH YOUR PURCHASE RECEIPT THAT DISPLAYS THE PURCHASE DATE TO OBTAIN WARRANTY SERVICE.

This Product is warranted by Nikon to be free from defects in material and workmanship for one (1) year from the date of-purchase by the original consumer purchaser. During this one year period, if this Product is found to be defective in material or workmanship, Nikon will at its option, either repair or replace this Product with a product of comparable specifications and value, each without chllrge,,,or refund the purchase price shown on your purchase receipt. Except to the extent restricted or prohibited by law, this warranty is subject to the following conditions, limitations and exclusions:

1. This warranty extends to the original consumer purchaser only and is not assignable or transferable, unless otherwise required by law.
2. This warranty shall not apply to any Product which has been subjected to misuse, abuse, abnormal use, negligence, alteration, accident. power surge if the Product contains electronic components, or has had its serial number altered or removed.·
3. This warranty does not apply to any defects or damage directly or indirectly caused by or resulting from the use of unauthorized.replacement parts and/or service performed by unauthorized personnel.
4. This warranty does not apply to any batteries.
5. This warranty is valid only with authentic Products, sold new by Nikon and purchased from Nikon or its authorized dealers/resellers in the country of purchase.
6. This warranty does not apply to non-Nikon products provided by Nikon, which are instead covered under the warranty, if any, issued by their respective manufacturers.

SUBJECT TO APPLICABLE LAW TO THE CONTRARY, THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR COLLATERAL, INCLUDING BUT NOT LIMITEDTO ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT, QUALITY OR DURABILITY, AND ALL OTHER OBLIGATIONS ON THE PART OF NIKON PROVIDED, HOWEVER, THAT IF THE DISCLAIMER OF IMPLIED WARRANTIES AND CONDITIONS IS INEFFECTIVE UNDER APPLICABLE LAW, THE DURATION OF ANY IMPLIEDWARRANTIESARISING BY OPERATION OF LAW SHALL BE LIMITEDTO ONE YEAR FROM THE DATE OF PURCHASE OR SUCH LONGER PERIOD AS MAY BE REQUIRED BY APPLICABLE.I.AW. SUBJECT TO APPLICABLE LAW TO THE CONTRARY, NIKON HEREBY DISCLAIMS ANY AND ALL LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, EXEMPLARY OR PUNITIVE DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY BREACH OF THIS WARRANTY OR ANY OTHER CLAIM WITH RESPECT TO THIS PRODUCT, INCLUDING BUT NOT LIMITED 10, CLAIMS OF NEGLIGENCE, STRICT LIABILITY IN TORT OR BREACH OF CONTRACT. SOME STATES/PROVINCES/TERRITORIES DO NOT ALLOW (A) LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR (BJ THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT .APPLY TO YOU. THIS WARRANTY APPLIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AND UNLESS RESTRICTED OR PROHIBITED BY LAW. WHERE ANY TERM OF THIS WARRANTY IS RESTRICTED OR PROHIBITED BY APPLICABLE LAW, SUCH TERM SHALL BE NOLL ANO VOID, BUT THE REMAINDER OF THIS WARRANTY SHALL REMAIN IN EFFECT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH  VARYFROM STATE/PROVINCE/TERRITORY TO STATE/PROVINCE/TERRITORY. ~=~ , UNLESS RESTRICTED OR PROtllBITED BY APPLICABLE LAW, THIS WARRANTYISVAUDONLY IN THE COUNTRY WHERE THE ORIGINAL CONSUMER PURCHASER PURCHASED THE PRODUCT FROM NIKON OR ITS AUTHORIZED DEALERS/RESELLERS IN THAT COUNTRY.

To obtain performance of the warranty obligations in the country of purchase, the original consumer purchaser must return this Nikon Product together with this warranty form and invoice or purchase receipt displaying the purchase date to the appropriate Nikon service facility. A Nikon-authorized dealer stamp may also be accepted as proof of purchase for Mexico. The current address of Nikon’s service facility within the United States can be obtained by visiting www.nikonusa/support or by calling 1-800-645-6687; within Canada: www.nikon,ca/support or by calling 1-877-534-9910; within Mexico: www,nikon.com.mx/soporte or by calling 001-800-645-6687.
Unless restricted or prohibited by applicable law, in returning this Nikon Product for repair or replacement or refund under this warranty, the original consumer purchaser must prepay all postage, shipping transportation, insurance and delivery costs, and the Nikon Product must be delivered in either its original carton or a similar package affording an equal degree of protection. Nikon will not be responsible for any loss or damage incurred in connection with the return of this Nikon Product.
Nikon Canada Inc. has its principal business address at 1366 Aerowood Drive, Mississauga, ON L4W 1 Cl, Canada.
Nikon Inc. has its principal business address at 1300 Walt Whitman Road, Melville, NY 11747, United States of America.
Nikon Mexico, S.A de C.V. has its principal business address at Av. Paseo de la Reforma No. 250, Torre Niza, Piso 12, Colonia Juarez, Alcaldia Cuauhtemoc, C. P. 06600, Ciudad de Mexico. Notice for residents of the country of Mexico: Nikon product accessories and other equipment can be found on Nikon Mexico, S.A de C.V. website at www.nikon.com.mx and its authorized dealers.
THIS WARRANTY FORM MAY NOT BE REPRODUCED OR COPIED AND WILL BE VALID ONLY WITH AUTHENTIC NIKON PRODUCTS.

References

• Cámaras de Nikon | Cámaras Digitales, los Lentes de Cámaras, y más
• nikon.com.mx/soporte
• index.html

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>