Nikon AF-S 1.8G Lens User Manual

Nikon AF-S 1.8G Lens

Product Information

The AF-S NIKKOR 105mm f/1.4E ED is a lens manufactured by NIKON CORPORATION, Japan. It is compatible with most Nikon digital and film SLR cameras, except for D2- or D1-series, D200, D100, D90, D80, D70-series, D60, D50, D40-series, or D3000 digital SLR cameras or film SLR cameras. The lens has a CPU contacts feature, a focus-mode switch, and a focus ring that supports autofocus with manual override (M/A) and manual focus with an electronic rangefinder (MF). The lens also includes a lens hood, a rubber lens-mount gasket, and a focus distance indicator.

Product Usage Instructions

1. Before using the AF-S NIKKOR 105mm f/1.4E ED, carefully read both the instructions provided with the lens and the camera manual.
2. Attach the lens to your compatible Nikon digital or film SLR camera using the lens mounting mark.
3. Select the appropriate focus mode based on your camera’s focus mode using the focus-mode switch. The lens supports M/A (autofocus with manual override) and MF (manual focus with electronic rangefinder) modes.
4. To use M/A mode:
   • Slide the lens focus-mode switch to M/A.
   • Focus using autofocus or manual focus with an electronic rangefinder.
   • If desired, autofocus can be overridden by rotating the lens focus ring while the shutter-release button is pressed halfway or by pressing the AF-ON button (if the camera is equipped with one). To refocus using autofocus, press the shutter-release button halfway or press the AF-ON button again.
5. To use MF mode:
   • Slide the lens focus-mode switch to MF.
   • Focus manually using the focus ring and electronic rangefinder.
6. Keep the safety instructions provided with the product in a convenient location for all users to read.
7. To prevent property damage or injury, read the “For Your Safety” section in its entirety before using this product.

Warranty Terms

Your Nikon equipment is guaranteed against any manufacturing defects for one full year from the date of original purchase. If during this period of guarantee the product proves defective due to improper material or workmanship, our authorized service network within the sales territory of Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set as below. Nikon reserves the right (at its sole discretion) to replace or repair the product.

1. This warranty is only provided upon presentation of the completed warranty card and original invoice or purchase receipt indicating the date of purchase, product type and dealer’s name, together with the product.
   Nikon reserves the right to refuse free-of-charge warranty service if the above documents cannot be presented or if the information contained in it is incomplete or illegible.

2. This warranty will not cover:

3. necessary maintenance and repair or replacement of parts due to normal wear and tear.

4. modifications to upgrade the product from its normal purpose as described in user manuals, without the prior written consent of Nikon.

5. transport costs and all risks of transport relating directly or indirectly to the warranty of the products.

6. any damage resulting from modifications or adjustments which may be made to the product, without the prior written consent of Nikon, in order to comply with local or national technical standards in force in any other country than the ones for which the product was originally designed and/or manufactured.

7. The warranty will not be applicable in the case of:

8. damage caused by misuse including but not limited to failure to use the product for its normal purpose or according to the user instructions on the proper use and maintenance, and to installation or use of the product inconsistent with the safety standards in force in the country where it is used.

9. damage caused by accidents including but not limited to lightning, water, fire, misuse or neglect.

10. alteration, defacing, illegibility or removal of the model or serial number on the product.

11. damage resulting from repairs or adjustments which have been conducted by unauthorized service organizations or persons.

12. defects in any system into which the product is incorporated or with which it is used.

13. This service warranty does not affect the consumer’s statutory rights under applicable national laws in force, nor the consumer’s right against the dealer arising from their sales/purchase contract.
    Notice: An overview of all authorized Nikon Service Stations can be found online by following this Link https://www.europe-nikon.com/service/

Before using this product, please carefully read both these instructions and the camera manual.
Note : This lens does not support D2- or D1-series, D200, D100, D90, D80, D70-series, D60, D50, D40-series, or D3000 digital SLR cameras or fi lm SLR cameras.

For Your Safety

• To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product.
• Keep these safety instructions where all those who use this product will read them

WARNING : Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION : Failure to observe the precautions marked with this icon could result in injury or property damage.

WARNING

• Do not disassemble or modify this product.
  Do not touch internal parts that become exposed as a result of a fall or other accident.
  Failure to observe these precautions could result in electric shock or other injury.

• Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source.
  Continued operation could result in fire, burns, or another injury.

• Keep dry.
  Do not handle it with wet hands.
  Failure to observe these precautions could result in fire or electric shock.

• Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols.
  Failure to observe this precaution could result in an explosion or fire.

• Do not directly view the sun or other bright light sources through the lens or camera.
  Failure to observe this precaution could result in visual impairment.

• Keep this product out of reach of children.
  Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.

• Do not handle with bare hands in locations exposed to extremely high or low temperatures.
  Failure to observe this precaution could result in burns or frostbite

CAUTION

• Do not leave the lens pointed at the sun or other strong light sources. Light focused by the lens is a source of fi re and damage to the product’s internal parts.
• Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fi re or product malfunction

Notices for Customers in Europe
This symbol indicates that electrical and electronic equipment is to be collected separately.

The following apply only to users in European countries:

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Parts of the Lens

1. Lens hood
2. Lens hood alignment mark
3. Lens hood lock mark
4. Lens hood mounting mark
5. Focus ring
6. Focus distance indicator
7. Focus distance mark
8. Lens mounting mark
9. Rubber lens-mount gasket
10. CPU contacts
11. Focus-mode switch

Focus
Supported focus modes are shown in the following table (for information on camera focus modes, see the camera manual).

Camera foc us mode

| Lens focus mode
---|---
M/A| M
AF| Autofocus with manual override| Manual focus with electronic rangefinder
MF| Manual focus with electronic rangefinder

M/A (Autofocus with Manual Override)
To focus using autofocus with manual override (M/A):

1. Slide the lens focus-mode switch to M/A.
2. Focus.
   If desired, autofocus can be overridden by rotating the lens focus ring while the shutter-release button is pressed halfway (or, if the camera is equipped with an AF-ON button, while the AF-ON button is pressed). To refocus using autofocus, press the shutter-release button halfway or press the AF-ON button again

Depth of Field
Depth of field can be previewed using the camera’s depth-of-field preview feature. A rough approximation is also provided by the focus distance indicator and by the depth-of-field indicator to either side of the focus distance mark, but note that these distances are intended as a guide only and may not be completely accurate. Due to the effects of depth of field and other factors, distant objects may be in focus at focus distances ∞.

Aperture
The aperture is adjusted using camera controls.

Built-in Flash Units
When using the built-in flash on cameras equipped with a built-in flash unit, remove the lens hood to prevent vignetting (shadows created where the end of the lens obscures the built-in flash).

The Lens Hood
The lens hoods protect the lens and block stray light that would otherwise cause flare or ghosting.

Attaching the Hood

Align the lens hood mounting mark (●) with the lens hood alignment mark and then rotate the hood (w) until the mark is aligned with the lens hood lock mark (—).
When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached. The hood can be reversed and mounted on the lens when not in use. When the hood is reversed, it can be attached and removed by rotating it while holding it near the lock mark.

Lens Care

• The lens returns to maximum aperture when removed from the camera. To protect the interior of the lens, store it out of direct sunlight or replace the lens caps.
• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
• Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair.
• Removing dust is normally sufficient to clean the glass surfaces of the lens.
• The fluorine-coated front and rear elements can be cleaned simply by wiping them with a dry cloth. Smudges and fingerprints can be removed using a soft, clean cotton cloth or lens cleaning tissue; clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass surface with your fingers. To remove stubborn stains, wipe gently using a soft cloth dampened with a small amount of distilled water, ethanol, or lens cleaner. Drop-shaped stains on the water- and oil-repellent fluorine-coated elements can be removed with a dry cloth.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• The lens hood or Neutral Color (NC) filters can be used to protect the front lens element.
• Attach the front and rear caps before placing the lens in its lens case.
• If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic.
• Rapid changes in temperature may cause damaging condensation inside and outside the lens. Before taking the lens from a warm to a cold environment or vice versa, place it in its case or a plastic bag to slow the change in temperature.

Supplied Accessories

• LC-82 82 mm snap-on Front Lens Cap
• LF-4 Rear Lens Cap
• HB-79 Bayonet Hood
• CL-1218 Lens Case

Compatible Accessories

• 82 mm screw-on filters

Specifications

3 ED lens elements and

lens elements with Nano-Crystal or fluorine coatings)

Angle of view| •  Nikon FX-format D-SLR cameras: 23° 10¢

•  Nikon DX-format D-SLR cameras: 15° 20¢

Distance information| Output to camera
Focusing| Nikon Internal Focusing (IF) System with autofocus

controlled by Silent Wave Motor and separate focus ring for manual focus

Focus distance indicator| 1.0 m to infinity (∞)
Minimum focus distance| 1.0 m (3.3ft) from focal plane
Diaphragm blades| 9 (rounded diaphragm opening)
Diaphragm| Automatic electronic aperture control
Aperture ra nge| f/1.4 – 16
Metering| Full aperture
Filter-attachment size| 82 mm (P = 0.75 mm)
Dimensions| Approx. 94.5 mm maximum diameter × 106 mm

(distance from camera lens mount flange)

Weight| Approx. 985 g (2 lb 2.8 oz)

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice

Printed in Japan
SB2I05(7E)
7MA0407E-05

WARRANTY CARD

References

• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
• Nikon | Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>