meliconi EDR200 Swivel and Tilt Wall Bracket Instruction Manual
- June 3, 2024
- meliconi
Table of Contents
EDR200 Swivel and Tilt Wall Bracket
Instruction Manual
Assembly equipment
Technical data
Self-locking nut, designed to prevent accidental loosening. Tighten firmly, with the correct tools, even after feeling the first resistance.
![meliconi EDR200 Swivel and Tilt Wall Bracket
- Figure 4](https://manuals.plus/wp-content/uploads/2022/12/meliconi-EDR200 -Swivel-and-Tilt-Wall-Bracket-Figure-4.png)
We suggest you keep the instruction manual for future use.
- This product contains small parts that if swallowed may cause suffocation. Keep out of the reach of children.
- Consult the TV manual to ensure the product is installed correctly and adjusted ergonomically.
- We suggest you rely on a qualified installer or retailer to assemble and install the product.
- Before mounting the bracket check that the wall you wish to apply it to is suitable.
- The screw anchors supplied are suitable only for use on solid walls, perforated brick and reinforced concrete walls. When installing the bracket on other kinds of walls, different anchoring systems should be used.
- When drilling holes in walls, make sure that they are the correct depth and diameter and remove any dust and waste.
- When mounting the bracket on solid wooden walls or beams, use only the self-threading screws supplied. No screw anchors are required as specified in the instructions.
- The product should only be used to carry TVs with the weights and drillholes indicated.
- The screws supplied to secure the TV to the bracket are suitable for the majority of TVs on the market, but they may not be right for yours. Check that the diameter, length and thread of the screws are right for your TV and if they are not purchase new ones.
- In order to avoid putting excessive tension on the connectors leave the cables slack.
- The bracket is designed for use only in indoor domestic environments with temperatures between + 5°C and + 40°C.
- Only use warm water and neutral soap to clean the product. Do not use solvents.
- Regularly check the anchorages and any parts that move or rotate.
- If damaged, the product should not be used.
- Follow the assembly instructions in the instruction manual. No liability will be accepted if these instructions and proper uses are not adhered to or if the bracket is tampered with in any way.
Certified quality
Meliconi S.p.A. – V. Minghetti, 10
40057 Cadriano di Granarolo E. (BO) Italy
www.meliconi.com
e-mail: info@meliconi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>